1. හැඳින්වීම
This manual provides detailed instructions for the installation, operation, and maintenance of your Vivotek IB9380-H 5MP IR Outdoor Network Bullet Camera. Please read this manual thoroughly before using the product to ensure proper setup and optimal performance. This camera is designed for outdoor security surveillance, offering high-resolution imaging and infrared capabilities for reliable monitoring.
Image 1.1: Vivotek IB9380-H 5MP IR Outdoor Network Bullet Camera overview.
2 ආරක්ෂිත තොරතුරු
- බලශක්ති ප්රභවය: Use only the specified AC/DC power adapter. Ensure the power supply is stable and meets the camera's requirements (3.5 watts).
- ස්ථාපන පරිසරය: This camera is rated for outdoor use (IP9380). Avoid installing in locations with extreme temperatures, high humidity, or corrosive substances beyond its operating specifications.
- හැසිරවීම: Do not drop or subject the camera to severe shock. Avoid touching the lens directly.
- විසුරුවා හැරීම: Do not attempt to disassemble or modify the camera. This may void the warranty and cause damage.
- කේබල් කිරීම: Ensure all cables are properly secured and protected from environmental damage or tampering.
3. පැකේජ අන්තර්ගතය
සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:
- Vivotek IB9380-H 5MP IR Outdoor Network Bullet Camera
- Mounting Kit (screws, wall anchors)
- ඉක්මන් ස්ථාපන මාර්ගෝපදේශය
- ඊතර්නෙට් කේබලය සඳහා ජල ආරක්ෂිත සම්බන්ධකය
4. පිහිටුවීම
4.1. භෞතික ස්ථාපනය සහ සවි කිරීම
The Vivotek IB9380-H camera is designed for wall mount installation. Choose a suitable location that provides the desired field of view and is within reach of power and network connections.
- සවි කරන මතුපිට සකස් කරන්න: Mark the drilling points on the wall using the mounting template (if provided) or by holding the camera's base against the surface.
- සිදුරු සිදුරු: Drill pilot holes at the marked positions. Insert wall anchors if mounting on drywall or masonry.
- කැමරාව සුරක්ෂිත කරන්න: Attach the camera's mounting base to the wall using the provided screws. Ensure it is firmly secured.
- කෝණය සීරුමාරු කරන්න: අවශ්ය අගය සැකසීමට කැමරා ශරීරයේ ඇති ගැලපුම් ඉස්කුරුප්පු ලිහිල් කරන්න. viewing angle. Tighten the screws once the angle is satisfactory.
Image 4.1: Camera dimensions and mounting diagram for installation planning.
4.2. කේබල් සම්බන්ධතාවය
Connect the necessary cables to the camera:
- ඊතර්නෙට් කේබල්: Connect a standard Ethernet cable (RJ45) to the camera's network port. Use the waterproof connector to protect the connection if exposed to weather.
- බල කේබලය: Connect the power adapter to the camera's power input. Ensure the connection is secure.
Image 4.2: Close-up of an Ethernet cable connector, similar to what is used for the camera's network connection.
4.3. මූලික බලය සක්රිය කිරීම
Once all cables are connected, plug the power adapter into an electrical outlet. The camera will power on and initiate its startup sequence. Observe any indicator lights for status.
5. මෙහෙයුම් උපදෙස්
5.1. Network Configuration and Access
The Vivotek IB9380-H supports Wi-Fi connectivity. For initial setup, it is recommended to connect via Ethernet to configure network settings.
- කැමරාව සොයා ගන්න: Use the Vivotek IP Search utility or your network router's client list to find the camera's assigned IP address.
- ප්රවේශය Web අතුරු මුහුණත: a විවෘත කරන්න web browser and enter the camera's IP address. Log in using the default credentials (refer to the Quick Installation Guide for details).
- Wi-Fi වින්යාස කරන්න: Navigate to the network settings within the web interface. Select your Wi-Fi network, enter the password, and save the settings. Once configured, you may disconnect the Ethernet cable if desired.
5.2. සජීවී View සහ පටිගත කිරීම
After network setup, you can access the camera's live feed and configure recording options.
- සජීවීව View: වෙතින් web interface or a compatible mobile application, select the camera to view එහි සජීවී සංග්රහය.
- පටිගත කිරීමේ සැකසුම: Configure recording schedules, continuous recording, or event-triggered recording (e.g., motion detection). Recordings can be stored on a network video recorder (NVR) or a local storage device if supported.
රූපය 5.1: උදාample of a tablet displaying multiple camera feeds, illustrating remote monitoring capabilities.
5.3. චලන හඳුනාගැනීමේ සැකසුම
The camera supports motion-only alerts.
- Access Alert Settings: In the camera's web interface, navigate to the event or alert settings section.
- Configure Motion Detection: Enable motion detection and define the detection zones and sensitivity levels.
- Set Actions: Specify actions to be taken upon motion detection, such as recording, sending email notifications, or triggering alarms.
5.4. Night Vision
The camera features IR (Infrared) and Night Color low light technology for clear imaging in various lighting conditions. These features typically activate automatically based on ambient light levels.
6. නඩත්තු කිරීම
- කාච පිරිසිදු කිරීම: Gently wipe the camera lens with a soft, clean cloth. For stubborn dirt, use a lens cleaning solution designed for optical surfaces. Do not use abrasive cleaners.
- ස්ථිරාංග යාවත්කාලීන කිරීම්: Periodically check the Vivotek webස්ථිරාංග යාවත්කාලීන කිරීම් සඳහා අඩවිය. ස්ථිරාංග යාවත්කාලීනව තබා ගැනීම ප්රශස්ත ක්රියාකාරිත්වය, ආරක්ෂාව සහ නව විශේෂාංග වෙත ප්රවේශය සහතික කරයි.
- පාරිසරික පරීක්ෂාව: Regularly inspect the camera and its mounting for any signs of wear, damage, or loose connections, especially after severe weather conditions.
- බල චක්රය: If the camera experiences minor issues, try power cycling it by disconnecting and reconnecting the power supply.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| බලය නැත | Power adapter unplugged or faulty; power outlet issue. | Check power connections. Test the outlet with another device. Try a different power adapter if available. |
| වීඩියෝ සංග්රහයක් නැත | Network connection issue; incorrect IP address; camera not configured. | Verify network cable connection or Wi-Fi settings. Confirm camera's IP address. Ensure camera is properly configured in your viewing මෘදුකාංග. |
| දුර්වල රූපයේ ගුණාත්මකභාවය | Dirty lens; low light conditions; incorrect resolution settings. | Clean the camera lens. Ensure sufficient lighting or verify night vision is active. Check video resolution settings in the camera's interface. |
| චලන හඳුනාගැනීම ක්රියා නොකරයි | Motion detection disabled; incorrect sensitivity; detection zones not set. | Enable motion detection in settings. Adjust sensitivity and define detection zones. |
8. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආකෘතිය | IB9380-එච් |
| ඵලදායී නිශ්චල විභේදනය | 5 MP |
| වීඩියෝ ග්රහණ විභේදනය | 1080p |
| රාමු අනුපාතය | 20 fps |
| අඩු ආලෝක තාක්ෂණය | රාත්රී වර්ණය |
| ආකෘති සාධකය | උණ්ඩය |
| ගෘහස්ථ / එළිමහන් භාවිතය | එළිමහන් |
| සවිකිරීමේ වර්ගය | වෝල් මවුන්ට් |
| රැහැන් රහිත සන්නිවේදනය | Wifi |
| සම්බන්ධතා ප්රොටෝකෝලය | Wifi |
| බලශක්ති ප්රභවය | AC/DC |
| වට්tage | වොට් 3.5 යි |
| ඇඟවීම් වර්ගය | චලනය පමණි |
| පාලන ක්රමය | දුරස්ථ |
| මානයන් (L x W x H) | අඟල් 3.59 x 3.59 x 6.96 |
| ජාත්යන්තර ආරක්ෂණ ශ්රේණිගත කිරීම | IP9380 |
| UPC | 655255870887, 681541834035 |
9. වගකීම් තොරතුරු
This Vivotek product is covered by a manufacturer's limited warranty. Please refer to the warranty card included in your package or visit the official Vivotek website for detailed terms and conditions regarding warranty coverage, duration, and claims procedures. Keep your proof of purchase for warranty service.
10. පාරිභෝගික සහාය
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Vivotek customer support. You can typically find contact information (phone, email, support portal) on the official Vivotek webවෙබ් අඩවියේ හෝ ඔබේ නිෂ්පාදනය සමඟ සපයා ඇති ලියකියවිලිවල.
සබැඳි සම්පත්: www.vivotek.com
