1. හැඳින්වීම
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Sharkoon V1000 RGB PC Case. Please read this manual carefully before beginning installation to ensure proper assembly and optimal performance.
රූපය 1.1: The Sharkoon V1000 RGB PC Case, showcasing its front mesh panel and pre-installed RGB fans.
2 ප්රධාන ලක්ෂණ
- සංයුක්ත නිර්මාණය: Mini-tower form factor suitable for Micro ATX motherboards.
- RGB ආලෝකකරණය: Pre-installed RGB fans for vibrant lighting effects.
- තෙම්පරාදු වීදුරු පැති පුවරුව: Showcases internal components.
- ප්රශස්ත වායු ප්රවාහය: Mesh front panel and support for multiple cooling fans.
- බහුකාර්ය අනුකූලතාව: Supports graphics cards up to 40 cm, air cooling systems, and standard power supplies.
- පහසු සම්බන්ධතාවය: Front I/O panel with USB 3.0 ports.
3. පිහිටුවීම සහ ස්ථාපනය
3.1. ඇසිරීම සහ පරීක්ෂා කිරීම
Carefully remove the PC case from its packaging. Inspect for any signs of damage during transit. Retain the packaging for future transport or storage.
3.2. Component Installation Overview
The Sharkoon V1000 RGB is designed for easy installation of your PC components. Follow the steps below for a typical build process.
- නඩුව සකස් කරන්න: Remove the tempered glass side panel and the rear metal side panel to access the interior.
- මවු පුවරුව ස්ථාපනය කරන්න: Secure your Micro ATX motherboard onto the pre-installed standoffs. Ensure all screws are tightened appropriately.
- Install Power Supply (PSU): The PSU mounts at the rear bottom of the case. Slide the PSU into the dedicated shroud area and secure it with screws from the rear.
- ගබඩා ධාවක ස්ථාපනය කරන්න: Utilize the drive bays for 2.5-inch SSDs or 3.5-inch HDDs. Refer to the case's internal structure for specific mounting points.
- ග්රැෆික් කාඩ්පත ස්ථාපනය කරන්න: Insert your graphics card into the appropriate PCIe slot on the motherboard and secure it with the retention clip and screw. The case supports cards up to 40 cm in length.
- ඉදිරිපස පැනල් කේබල් සම්බන්ධ කරන්න: Connect the front panel I/O cables (USB, audio, power, reset, LED) to their respective headers on the motherboard.
- කේබල් කළමනාකරණය: Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables neatly. This improves airflow and aesthetics.
- Reattach Panels: Once all components are installed and cables are managed, reattach the side panels.
රූපය 3.1: Internal layout of the V1000 RGB, highlighting the motherboard tray and PSU shroud.
රූපය 3.2: පසුපස අභ්යන්තරය view, illustrating cable routing options and drive bay locations.
4. PC කේස් එක ක්රියාත්මක කිරීම
4.1. බලගැන්වීම
After connecting all external peripherals and the power cable to your PSU, press the power button located on the top front panel of the case to turn on your system.
4.2. RGB ආලෝකකරණ පාලනය
The pre-installed RGB fans are typically controlled via your motherboard's RGB software (if compatible) or a dedicated RGB controller if included with your specific model. Refer to your motherboard or controller manual for detailed instructions on changing lighting modes and colors.
රූපය 4.1: ඉදිරිපස view of the V1000 RGB, showcasing the vibrant RGB fan illumination.
5. නඩත්තු කිරීම
5.1. දූවිලි පෙරහන් පිරිසිදු කිරීම
The Sharkoon V1000 RGB features magnetic dust filters on the top and front panels to prevent dust accumulation inside the case. Regularly clean these filters to maintain optimal airflow and cooling performance.
- Top Filter: Gently lift the magnetic filter from the top panel.
- ඉදිරිපස පෙරහන: The front mesh panel can be partially opened or removed for access to the front fans and filter.
- Use a soft brush or compressed air to remove dust from the filters. Rinse with water if necessary, and ensure they are completely dry before reattaching.
රූපය 5.1: Magnetic dust filter on the top panel, easily removable for cleaning.
රූපය 5.2: The front panel can be opened for easy access to the front fans and dust filter.
5.2 සාමාන්ය පිරිසිදු කිරීම
මෘදු, d රෙදි කඩකින් කවරයේ පිටත කොටස පිස දමන්න.amp cloth. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.
6. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| පරිගණකය ක්රියාත්මක නොවේ. | Loose power connections (PSU, motherboard, front panel). | Check all power cables are securely connected. Ensure front panel power switch cable is correctly attached to the motherboard. |
| RGB fans not lighting up. | RGB cables not connected or incorrect software settings. | Verify RGB cables are properly connected to the motherboard or controller. Check motherboard's RGB software settings. |
| Poor airflow/overheating. | Dusty filters or obstructed fan vents. | Clean dust filters. Ensure no cables or components are blocking fan airflow. |
| Front USB ports not working. | ඉදිරිපස පුවරුවේ USB කේබලය මවු පුවරුවට සම්බන්ධ කර නොමැත. | Ensure the USB 3.0 header cable from the front panel is securely connected to the motherboard's USB 3.0 header. |
7. තාක්ෂණික පිරිවිතර
- මාදිලියේ නම: Sharkoon V1000 RGB
- ආදර්ශ අංකය: 4044951035052
- නඩු වර්ගය: කුඩා කුළුණ
- මවු පුවරු අනුකූලතාව: ක්ෂුද්ර ATX
- ද්රව්ය: වානේ, ටෙම්පර්ඩ් වීදුරු, ප්ලාස්ටික්
- වර්ණය: Multicolored (Black with RGB elements)
- සිසිලන ක්රමය: වාතය
- පෙර-ස්ථාපිත විදුලි පංකා: RGB fans (quantity not specified, but images show 3)
- උපරිම. ග්රැෆික් කාඩ්පත් දිග: 40 සෙ.මී
- PSU Mounting: පසුපස බොත්තම්
- ඉදිරිපස I/O: 2 x USB 3.0, Audio In/Out, Power Button, Reset Button
- විශේෂ ලක්ෂණ: RGB Lighting, Tempered Glass Side Panel, Removable Dust Filters
8. වගකීම් සහ සහාය
Sharkoon products are manufactured with high-quality standards. In the unlikely event of a defect, please contact your local retailer or Sharkoon customer support.
- Parts Availability: Spare parts are generally available for 2 years from the date of purchase.
- For technical assistance or warranty claims, please visit the official Sharkoon webඅඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ සහාය නාලිකා අමතන්න.
