Fanvil PA2S IP SIP Paging Gateway

1. හැඳින්වීම

The Fanvil PA2S is an advanced IP SIP Paging Gateway designed for robust media streaming using standard IP/RTP/RTSP protocols. This versatile device integrates multiple functionalities including broadcast, recording, intercom, and security features, making it suitable for various deployment scenarios. Its compact design facilitates integration into diverse solutions.

2 ආරක්ෂිත තොරතුරු

Please read these safety instructions carefully before using the Fanvil PA2S. Failure to follow these guidelines may result in electric shock, fire, or damage to the device.

• බල සැපයුම: Use only the specified power adapter (12V-24V DC) or a compliant Power over Ethernet (PoE) source. Ensure the power source matches the device's requirements.
• පරිසරය: Operate the device in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture. Avoid extreme temperatures.
• හැසිරවීම: Do not drop, disassemble, or attempt to repair the device yourself. Refer all servicing to qualified personnel.
• කේබල්: Ensure all cables are securely connected and not damaged. Do not route cables where they can be tripped over or damaged.

3. පැකේජ අන්තර්ගතය

ඔබගේ පැකේජයේ සියලුම අයිතම ඇති බව තහවුරු කරගන්න:

• Fanvil PA2S Unit
• Power Adapter (may vary by region/bundle, if not using PoE)
• සවි කිරීමේ උපාංග (ඉස්කුරුප්පු, වරහන්)
• Quick Installation Guide (this manual)

4. නිෂ්පාදන අවසන්view

The Fanvil PA2S features a compact design with various interfaces for connectivity and control.

4.1 උපාංග පිරිසැලසුම

රූපය 1: ඉදිරිපස view of the Fanvil PA2S, showing various input/output terminals and power input.

රූපය 2: කෝණික view of the Fanvil PA2S, highlighting the network ports on the side.

4.2 ප්රධාන ලක්ෂණ

• Emergency button interface for active calls.
• Adaptive 10/100 Mbps network port with built-in Power over Ethernet (PoE).
• NVR video recording support via standard RJ45 interface.
• Recording output with a 3.5 mm standard audio interface.
• Audio output port for connecting an expandable external active speaker.
• One switching signal input and output (built-in relay).
• මොනෝ චැනල් බලය Amplifier Output (10W~30W), adjustable based on input voltage.

5. පිහිටුවීම

Follow these steps to set up your Fanvil PA2S:

1. සවි කිරීම: Secure the PA2S unit in your desired location using the provided mounting accessories. Ensure adequate ventilation.
2. ජාල සම්බන්ධතාවය: Connect an Ethernet cable from your network switch or router to the RJ45 network port on the PA2S. If using PoE, this single cable will also provide power.
3. බල සම්බන්ධතාවය (PoE භාවිතා නොකරන්නේ නම්): If PoE is not available, connect a 12V-24V DC power adapter to the power input port on the PA2S.
4. ශ්‍රව්‍ය ප්‍රතිදානය: Connect external speakers to the "SPK LINE OUT" terminals or an active speaker to the 3.5mm audio output port.
5. මයික්‍රෆෝන ආදානය: Connect a microphone to the "MIC" terminals if required for intercom or recording.
6. Logic Input/Output: Connect external devices for security triggers or control via the "LOGIC IN/OUT" terminals as per your system design.
7. වින්‍යාසය: උපාංගය වෙත පිවිසෙන්න web interface via its IP address (refer to your network's DHCP server or use a network scanner to find it) to configure SIP accounts, paging zones, and other settings.

6. මෙහෙයුම් උපදෙස්

The Fanvil PA2S operates as a SIP endpoint, integrating with your existing IP PBX or SIP server to provide various communication and security functions.

• Paging/Broadcast: Initiate a page or broadcast by dialing the configured extension of the PA2S from a SIP phone. The audio will be streamed to connected speakers.
• ඉන්ටර්කොම්: Utilize the microphone input and speaker output for two-way audio communication when configured as an intercom endpoint.
• පටිගත කිරීම: The device supports recording output via its 3.5mm interface, allowing integration with external recording systems.
• ආරක්ෂක කාර්යයන්: The logic input/output and emergency button interface enable integration with security systems for trigger events and active calls.
• ශබ්ද පාලනය: Adjust output volume through the device's web interface or connected SIP phone controls, if supported.

7. නඩත්තු කිරීම

Regular maintenance ensures optimal performance and longevity of your Fanvil PA2S.

• පිරිසිදු කිරීම: උපාංගයේ බාහිර පෙනුම පිරිසිදු කිරීම සඳහා මෘදු වියළි රෙද්දක් භාවිතා කරන්න. දියර පිරිසිදු කරන්නන් හෝ එයරොසෝල් භාවිතා නොකරන්න.
• ස්ථිරාංග යාවත්කාලීන කිරීම්: වරින් වර ෆෑන්විල් නිලධාරියා පරීක්ෂා කරන්න website for firmware updates. Updating the firmware can improve performance, add new features, and fix bugs. Follow the instructions provided with the firmware update carefully.
• පාරිසරික පරීක්ෂණ: Ensure the operating environment remains within recommended temperature and humidity ranges.

8. දෝශ නිරාකරණය

If you encounter issues with your Fanvil PA2S, refer to the following common problems and solutions:

9. පිරිවිතර

10. වගකීම් සහ සහාය

For warranty information, technical support, or service inquiries regarding your Fanvil PA2S, please contact Fanvil customer support directly or visit their official webවෙබ් අඩවිය. මිලදී ගැනීම පිළිබඳ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

ෆෑන්විල් නිල Webඅඩවිය: www.fanvil.com