Aubric FAN53T Ceiling Fan Remote Control

1. හැඳින්වීම

Thank you for choosing the Aubric FAN53T Ceiling Fan Remote Control. This remote is designed as a replacement transmitter for various ceiling fan models, providing convenient control over fan speeds and lighting. This manual will guide you through the setup, operation, and maintenance of your new remote control.

Image 1.1: The Aubric FAN53T remote control, showcasing its 3 fan speeds, light ON/OFF/Dimming, and luminous button features.

2 ආරක්ෂිත තොරතුරු

• This remote control is intended for indoor use only.
• Do not expose the remote to water or excessive moisture.
• ස්ථාපනය අතරතුර නිවැරදි බැටරි වර්ගය සහ ධ්‍රැවීයතාව භාවිතා කරන බවට සහතික වන්න.
• දරුවන්ට ළඟාවිය නොහැකි ලෙස බැටරි තබා ගන්න.
• දුරස්ථ පාලකය විසුරුවා හැරීමට හෝ වෙනස් කිරීමට උත්සාහ නොකරන්න.
• This remote is a transmitter only; a compatible receiver is required for operation and is not included.

3. පැකේජ අන්තර්ගතය

පැකේජයට පහත අයිතම ඇතුළත් වේ:

• 1 x Aubric FAN53T Remote Control Transmitter
• 1 x බිත්ති සවිකිරීමේ රඳවනය
• Mounting Screws and Wall Anchors (2 each)

Note: A 9V battery is required for operation and is NOT included in the package.

Image 3.1: The Aubric FAN53T remote control, its wall mount holder, and included mounting hardware.

4. නිෂ්පාදන අවසන්view

The Aubric FAN53T remote control features intuitive buttons for easy operation of your ceiling fan and light.

• HI / MED / LOW: විදුලි පංකාවේ වේගය පාලනය කරයි.
• අක්‍රියයි: විදුලි පංකාව නිවා දමයි.
• ආලෝකය / අඳුරු: Turns the light on/off and adjusts brightness. This button is luminous for easy visibility in the dark.

Image 4.1: A hand holding the remote, illustrating the function of the HI, MED, LOW, OFF, and LIGHT/DIMMER buttons.

5. පිහිටුවීම

5.1. බැටරි ස්ථාපනය

1. දුරස්ථ පාලකයේ පිටුපස බැටරි මැදිරි කවරය සොයා ගන්න.
2. කවරය ගලවන්න.
3. Insert one 9V battery, ensuring correct polarity (+/-).
4. බැටරි මැදිරි කවරය ප්රතිස්ථාපනය කරන්න.

5.2. DIP Code Pairing

To ensure proper communication between the remote and your ceiling fan receiver, the DIP (Dual In-line Package) switches on both devices must match. The DIP switches are typically found inside the battery compartment of the remote and on the receiver unit within the fan canopy.

1. Open the battery compartment of your new Aubric FAN53T remote control.
2. Locate the set of small switches (usually 4 or more) inside the compartment. These are the DIP switches.
3. Identify the DIP switch settings on your existing ceiling fan receiver or original remote control. Note the ON/OFF (or UP/DOWN) position of each switch.
4. Carefully adjust the DIP switches on your new Aubric FAN53T remote to exactly match the pattern of your receiver/original remote.
5. Once the DIP codes match, replace the battery compartment cover.

Important: If the DIP codes do not match, the remote will not control the fan.

Image 5.2.1: Visual guide for matching DIP switch settings between the remote control and the ceiling fan receiver.

රූපය 5.2.2: සමීප ඡායාරූපයක් view of the DIP switches located within the battery compartment of the remote.

6. මෙහෙයුම් උපදෙස්

6.1. විදුලි පංකා පාලනය

• ඔබන්න HI button for high fan speed.
• ඔබන්න MED button for medium fan speed.
• ඔබන්න අඩු button for low fan speed.
• ඔබන්න අක්රියයි විදුලි පංකාව නිවා දැමීමට බොත්තම.

6.2. ආලෝක පාලනය

• ඔබන්න LIGHT / DIMMER ආලෝකය සක්‍රිය හෝ අක්‍රිය කිරීමට වරක් බොත්තම.
• To dim the light, press and hold the LIGHT / DIMMER button. Release when the desired brightness is reached.
• The dimmer function is compatible with incandescent, halogen, and dimmable LED/CFL lamps. Non-dimmable LED lights will only have ON/OFF functionality.

7. ගැළපුම

The Aubric FAN53T remote control is designed to be compatible with specific ceiling fan receivers and replace certain remote models. Please verify your existing remote or receiver's FCC ID/Model number before purchase.

• This 53T transmitter is primarily designed to work with 28R receivers.
• It replaces remotes with the following FCC ID/Model numbers:
• 2AAZPFAN53T / FAN-53T
• L3HFAN11T / FAN-11T
• KUJCE9103 / E08BT
• CHQ7030T / UC7030T (53T)
• L3HFAN35T1
• L3H2010FANHD / FAN-HD
• Ensure your original remote looks identical to this replacement, especially if it lacks a reverse button.
• This remote is compatible with most downrod style fans.
• සමග නොගැලපේ: Wall-mounted fans or exhaust-type fans.

Image 7.1: The back of the remote control, indicating where to find the FCC ID/Model number and a list of compatible original remote models.

Image 7.2: An illustration detailing the wide compatibility of the remote with various fan types and light bulb technologies, including incandescent, halogen, and dimmable LED/CFL.

8. නඩත්තු කිරීම

8.1. බැටරි ප්රතිස්ථාපනය

When the remote's performance degrades or it stops responding, it's likely time to replace the 9V battery. Follow the battery installation steps in Section 5.1.

8.2 පිරිසිදු කිරීම

To clean the remote control, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

9. දෝශ නිරාකරණය

10. පිරිවිතර

• ආකෘතිය: FAN53T
• බලශක්ති ප්රභවය: 1 x 9V බැටරි (ඇතුළත් නොවේ)
• මානයන්: ආසන්න වශයෙන් 5.03 x 2.16 x 1.02 අඟල් (L x W x H)
• බර: ආසන්න වශයෙන් 3.2 අවුන්ස
• පාලන වර්ගය: RF (රේඩියෝ සංඛ්‍යාතය)
• කාර්යයන්: 3-speed fan control (HI/MED/LOW/OFF), Light ON/OFF/Dimmer
• ගැළපුම: Specific FCC ID/Model numbers (refer to Section 7)

Image 10.1: Diagram illustrating the physical dimensions of the Aubric FAN53T remote control.

11. වගකීම් සහ සහාය

Aubric products are manufactured with quality and performance in mind. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Aubric website. Please have your product model number (FAN53T) and purchase details ready when contacting support.

වැඩිදුර සහාය සඳහා, ඔබට Amazon හි නිෂ්පාදන පිටුව වෙතද යොමු විය හැක: Aubric FAN53T on Amazon