Absima CR4S V2 2.4Ghz Radio System

1. හැඳින්වීම

ස්තූතියි, උදව් කළාටasing the Absima CR4S V2 2.4Ghz Radio System. This 4-channel pistol grip remote control system is designed for reliable and precise operation of your remote-controlled vehicles. It features a robust design and includes a "beginner mode" for ease of use, making it suitable for users of all experience levels.

2. ආරක්ෂිත පූර්වාරක්ෂාවන්

• Always operate your RC vehicle in a safe and responsible manner.
• Ensure batteries are correctly installed and charged before use.
• Do not expose the radio system to water or extreme temperatures.
• Keep the system away from small children to prevent accidental ingestion of small parts.
• Turn off the receiver first, then the transmitter, when finished operating. Turn on the transmitter first, then the receiver, when starting operation.

3. පැකේජ අන්තර්ගතය

The Absima CR4S V2 2.4Ghz Radio System package includes the following components:

• Absima CR4S V2 2.4Ghz Transmitter (TX)
• Absima 2.4Ghz Receiver (RX)

4. නිෂ්පාදන අවසන්view

Familiarize yourself with the main components of your Absima CR4S V2 radio system.

Figure 4.1: Absima CR4S V2 Transmitter (left) and Receiver (right).

රූපය 4.2: සවිස්තරාත්මක view of the Absima CR4S V2 Transmitter's control panel, showing various adjustment knobs and switches.

4.1 සම්ප්‍රේෂකය (TX)

• සුක්කානම: Controls the left and right steering of the vehicle.
• Throttle Trigger: Controls forward and reverse movement. Pull for forward, push for reverse/brake.
• CH3/CH4 Buttons/Switches: Auxiliary channels for controlling additional functions on your vehicle (e.g., lights, winches), if supported.
• කප්පාදු ගැලපීම්: Dials or sliders for fine-tuning steering and throttle neutral positions.
• බල සැපයුම් සුවිචය: සම්ප්රේෂකය සක්රිය / අක්රිය කරයි.
• බැටරි මැදිරිය: Located at the bottom of the handle, for installing alkaline batteries.

4.2 ලබන්නා (RX)

• ඇන්ටනාව: Receives signals from the transmitter. Ensure it is properly positioned.
• Channel Ports: Connectors for steering servo, throttle ESC, and auxiliary channels (CH3, CH4).
• බන්ධ බොත්තම: Used to pair the receiver with the transmitter.

5. පිහිටුවීම

5.1 සම්ප්රේෂක බැටරි ස්ථාපනය

1. Locate the battery compartment cover on the bottom of the transmitter handle.
2. කවරය විවෘත කරන්න.
3. Insert the required alkaline batteries (not included) according to the polarity markings (+/-).
4. බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.

5.2 Receiver Installation and Connection

1. Mount the receiver securely in your RC vehicle, away from electrical interference.
2. Connect the steering servo to the "CH1" port on the receiver.
3. Connect the Electronic Speed Controller (ESC) to the "CH2" port on the receiver.
4. Connect any auxiliary components (e.g., lights) to "CH3" or "CH4" ports as needed.
5. Ensure the receiver antenna is extended and positioned correctly for optimal signal reception.

5.3 සම්ප්‍රේෂකය සහ ග්‍රාහකය බැඳීම

Binding is the process of linking the transmitter and receiver so they communicate exclusively with each other.

1. Ensure the transmitter is turned OFF.
2. Connect a bind plug (if supplied with your vehicle's ESC or receiver) to the "BIND" port on the receiver.
3. Power on the RC vehicle (which powers the receiver). The receiver's LED should flash, indicating it's in bind mode.
4. While holding down the bind button on the transmitter (refer to transmitter diagram for location), turn on the transmitter.
5. Release the bind button on the transmitter once its LED indicates a successful connection (usually a solid light).
6. Turn off the receiver, then the transmitter.
7. ග්‍රාහකයෙන් බන්ධන ප්ලග් ඉවත් කරන්න.
8. Turn on the transmitter first, then the receiver. The receiver's LED should now be solid, indicating a successful bind.

6. ක්‍රියාත්මක වීම

6.1 බලය සක්‍රිය/අක්‍රිය කිරීමේ අනුපිළිවෙල

• බල ගැන්වීමට: Turn on the transmitter first, then power on your RC vehicle (receiver).
• බලය අක්රිය කිරීමට: Power off your RC vehicle (receiver) first, then turn off the transmitter.

6.2 මූලික පාලන

• මෙහෙයවීම: Rotate the steering wheel left or right to control the direction of your vehicle.
• තෙරපුම: Pull the trigger towards you for forward movement. Push the trigger away from you for reverse or braking.
• Auxiliary Channels (CH3/CH4): Use the corresponding buttons or switches on the transmitter to activate functions connected to these channels on your vehicle.

6.3 ආරම්භක මාදිලිය

The Absima CR4S V2 features a "beginner mode" which limits the maximum throttle output, making the vehicle easier to control for new users or children. Refer to your transmitter's specific controls for activating and deactivating this mode. This mode helps in learning to drive without overwhelming power.

7. නඩත්තු කිරීම

• Keep the transmitter and receiver clean and free from dust and dirt. Use a soft, dry cloth for cleaning.
• Avoid exposing the system to direct sunlight or high humidity for extended periods.
• Remove batteries from the transmitter if it will not be used for an extended period to prevent leakage.
• Regularly check all connections for security and wear.

8. දෝශ නිරාකරණය

9. පිරිවිතර

• ආදර්ශ අංකය: 2000010
• නාලිකා: 4
• සංඛ්යාතය: 2.4 GHz
• සම්ප්රේෂක මානයන්: ආසන්න වශයෙන් 9 x 2 x 36 සෙ.මී
• බර: Approximately 130 g (Transmitter only, without batteries)
• ද්රව්ය: ප්ලාස්ටික්
• වර්ණය: කළු
• Batteries Required (Transmitter): Yes (Alkaline, not included)
• එකලස් කිරීම අවශ්ය වේ: නැත

10 වගකීම් සහතිකය

Absima products are manufactured to high quality standards. This product is covered by a manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation provided with your purchase or visit the official Absima webඅඩවිය.

11. සහාය

For technical assistance, troubleshooting, or spare parts inquiries, please contact your local Absima dealer or visit the official Absima support website. Online resources, FAQs, and contact information can typically be found there.