හැඳින්වීම
The CAT CLJ1200 1,200-Peak Amp Li-Ion Jump Starter is a compact and powerful solution designed to jump-start most vehicles, including those with V8 engines. This device features detachable smart jumper cables with integrated reverse-polarity protection for safe and easy connections. Beyond jump-starting, it serves as a portable power bank with standard USB and USB-C ports for charging mobile devices. An integrated LED work light assists in low-light conditions, and a clear 3-bar battery display provides quick status updates. The unit can be charged using either an AC or DC adapter.
වැදගත් ආරක්ෂක තොරතුරු
අවවාදයයි: පිළිකා සහ ප්රජනක හානි. වැඩි විස්තර සඳහා පිවිසෙන්න www.P65Warnings.ca.gov.
Always read and understand all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Keep these instructions for future reference.
පෙට්ටියේ ඇති දේ

This image displays the main components included with the CAT CLJ1200: the jump starter unit, smart jumper cables, an AC charger, a DC charger, and a USB-A charging cable.

A closer look at the powder-coated metal clamps, the AC charger, and highlights the USB-C charging capability of the unit.
- CAT CLJ1200 Jump Starter Unit
- Detachable Smart Jumper Cables with Reverse-Polarity Protection
- AC වෝල් චාජරය
- ඩීසී කාර් චාජර්
- USB-A ආරෝපණ කේබලය
- පරිශීලක අත්පොත (මෙම ලේඛනය)
නිෂ්පාදන විශේෂාංග

An annotated diagram showing the various components and ports of the CLJ1200 jump starter, including USB-A and USB-C ports, LED light, and the smart controller for the jumper cables.

This image illustrates key performance features such as 1200 peak amps, the ability to provide up to 30 jump starts, the presence of 3.1A USB-A and USB-C ports, and the integrated LED light.
- 1,200 උපරිමය Amps: Delivers sufficient power to jump-start most vehicles, including V8 cars and trucks.
- බලශක්ති බැංකු ක්රියාකාරීත්වය: Equipped with one USB Type-A port and one quick-charging USB Type-C port (total 3.1 amps) for charging smartphones and other electronics.
- ස්මාර්ට් ජම්පර් කේබල්: Easy-to-use detachable cables with integrated reverse polarity alarm to alert users of improper connections, ensuring safety.
- Ultrabright LED Work Light: Helps illuminate the work area in dark conditions, useful for roadside repairs.
- සංයුක්ත නිර්මාණය: Portable and easy to store in a vehicle.
පැනීමේ ආරම්භකය අයකිරීම
Before first use, fully charge the CAT CLJ1200 jump starter. It is recommended to recharge the unit after each use and at least every 3-6 months to maintain optimal battery health.
- Using the AC Wall Charger: Connect the AC charger to the jump starter's charging port and plug it into a standard wall outlet.
- Using the DC Car Charger: For charging on the go, connect the DC car charger to the jump starter's charging port and plug it into your vehicle's 12V accessory outlet.
- The 3-bar battery display will indicate the charging progress. All three bars will illuminate when fully charged.
මෙහෙයුම් උපදෙස්: වාහනයක් පන ගන්වන්න
Always ensure the jump starter is fully charged before attempting to jump-start a vehicle. Follow these steps carefully:

The integrated LED work light provides illumination for working in dark environments, such as under the hood at night.
- වාහනය සූදානම් කරන්න: Turn off the vehicle's ignition and all accessories (lights, radio, air conditioning). Engage the parking brake.
- ජම්පර් කේබල් සම්බන්ධ කරන්න:
- සම්බන්ධ කරන්න රතු ධනාත්මක (+) clamp to the positive (+) terminal of the vehicle's dead battery.
- සම්බන්ධ කරන්න කළු සෘණ (-) clamp to a clean, unpainted metal part of the vehicle's engine block or chassis, away from the battery. Do not connect the negative clamp directly to the negative terminal of the dead battery.
The smart cables feature reverse-polarity protection. If an incorrect connection is made, an alarm will sound, and the unit will not allow current to flow, preventing damage.
- වාහනය ආරම්භ කරන්න: Once the cables are correctly connected and the smart controller indicates a safe connection, attempt to start the vehicle. Crank the engine for no more than 5 seconds.
- If Vehicle Doesn't Start: Wait at least 1 minute before attempting to crank the engine again. Do not attempt more than three consecutive jump starts.
- Disconnect Jumper Cables: Once the vehicle starts, disconnect the කළු සෘණ (-) clamp first, then disconnect the රතු ධනාත්මක (+) clamp.
- Recharge Jump Starter: Recharge the CAT CLJ1200 as soon as possible after use to ensure it's ready for the next emergency.

The CAT CLJ1200 jump starter with its smart cables properly connected to a vehicle's battery terminals, ready for operation.
අතේ ගෙන යා හැකි බලශක්ති බැංකුවක් ලෙස භාවිතා කිරීම
The CLJ1200 can also be used to charge your portable electronic devices.

The back of the unit features both USB-A and USB-C output ports for charging various electronic devices.
- Connect your device's USB charging cable to either the USB Type-A or USB Type-C port on the jump starter.
- පැනීමේ ආරම්භකය ඔබගේ උපාංගය ස්වයංක්රීයව ආරෝපණය කිරීම ආරම්භ කරයි.
- Monitor your device's charging status. Disconnect once charging is complete.
නඩත්තු කිරීම සහ ගබඩා කිරීම
- Keep the jump starter clean and dry. Wipe with a soft, damp cloth if necessary. Do not use harsh chemicals.
- සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක ඒකකය ගබඩා කරන්න.
- Recharge the unit every 3-6 months, even if not used, to prolong battery life.
- Inspect cables and clamps for any damage before each use.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| පැනීමේ ආරම්භකය ක්රියාත්මක නොවේ. | බැටරි සම්පූර්ණයෙන්ම විසර්ජනය වේ. | Charge the jump starter using the AC or DC charger. |
| පැනීමේ උත්සාහයෙන් පසු වාහනය පණ ගැන්වෙන්නේ නැත. | Incorrect cable connection; Vehicle battery severely discharged; Vehicle issue not battery-related. | Check cable connections (ensure no reverse polarity alarm). Allow 1 minute between attempts. If still no start, consult a mechanic. |
| ප්රතිලෝම ධ්රැවීයතා අනතුරු ඇඟවීමේ ශබ්ද. | Jumper cables connected incorrectly. | Disconnect cables and re-connect them correctly: RED to positive (+), BLACK to engine block/chassis. |
| USB පෝට් උපාංග ආරෝපණය නොකරයි. | Jump starter battery low; Device not compatible; Cable issue. | Recharge the jump starter. Ensure your device is compatible and the USB cable is functional. |
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | බළලා |
| ආකෘතිය | CLJ1200 |
| උපරිම ප්රතිදාන ධාරාව | 1200 Amps |
| Ampකෝපය | 1200 Amps |
| නිෂ්පාදන මානයන් | 7"D x 1"W x 3"H |
| අයිතමයේ බර | පවුම් 1ක් |
| බැටරි වර්ගය | ලිතියම් අයන (1ක් ඇතුළත්) |
| USB ප්රතිදානය | 1 USB Type-A, 1 USB Type-C (Total 3.1 Amps) |
| නිෂ්පාදකයා | BACCUS GLOBAL LLC |
| UPC | 814632014980 |
| මුල් රට | චීනය |
වගකීම් තොරතුරු
This product is covered by a one (1) year limited warranty from the date of purchase. This warranty covers defects in material and workmanship under normal use. For full details regarding warranty terms, conditions, and how to make a claim, please refer to the official warranty statement provided by BACCUS GLOBAL LLC.
පාරිභෝගික සහාය
For technical assistance, troubleshooting, or warranty claims, please contact the manufacturer, BACCUS GLOBAL LLC. Refer to the product packaging or the manufacturer's webනවතම සම්බන්ධතා තොරතුරු සඳහා අඩවිය.
ඔබට අමතර සම්පත් සහ නිතර අසන ප්රශ්න ද සොයාගත හැකිය Amazon හි නිෂ්පාදන පිටුව.





