TecTake Metal Office Cabinet with Lock

1. හැඳින්වීම

Thank you for choosing the TecTake Metal Office Cabinet. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new cabinet. Please read these instructions carefully before beginning assembly and retain them for future reference.

Figure 1: TecTake Metal Office Cabinet with doors open, showcasing එහි ගබඩා හැකියාවන්.

2 ආරක්ෂිත තොරතුරු

නිෂ්පාදනයට තුවාල හෝ හානි වැළැක්වීම සඳහා කරුණාකර පහත ආරක්ෂක මාර්ගෝපදේශ නිරීක්ෂණය කරන්න:

• Keep keys in a secure location and do not leave the cabinet unlocked when unattended.
• Exercise caution to avoid pinching fingers in the hinges of the swing doors during use.
• Ensure the cabinet is assembled on a flat, stable surface to prevent tipping.
• Do not exceed the maximum weight capacity per shelf (40 kg) to maintain stability and prevent structural damage.
• හුස්ම හිරවීම වැළැක්වීම සඳහා කුඩා කොටස් සහ ඇසුරුම් ද්‍රව්‍ය ළමයින්ගෙන් ඈත් කරන්න.

3. පැකේජ අන්තර්ගතය

එකලස් කිරීමට පෙර, සියලුම සංරචක පවතින බවත් හානි වී නොමැති බවත් තහවුරු කර ගන්න. පැකේජයේ අඩංගු විය යුත්තේ:

• Cabinet panels (sides, top, bottom, back, doors)
• Adjustable shelves (quantity: 3)
• Drawer components (quantity: 2 sets)
• Lock mechanisms and keys (8 keys total, 2 per lock)
• Assembly hardware (screws, bolts, nuts, shelf pins)
• Rubber buffers for silent door operation
• උපදෙස් අත්පොත (මෙම ලේඛනය)

කිසියම් කොටසක් අස්ථානගත වී හෝ හානි වී ඇත්නම්, එකලස් කිරීමට පෙර කරුණාකර පාරිභෝගික සහාය අමතන්න.

4. එකලස් කිරීමේ උපදෙස්

Assembly requires careful attention to detail. It is recommended to have two people for assembly. A Phillips head screwdriver is the only tool required. Avoid using power drills, as overtightening can damage the metal.

4.1 සකස් කිරීම

1. එකලස් කිරීම සඳහා ඉඩකඩ සහිත, පිරිසිදු සහ පැතලි ප්‍රදේශයක් හිස් කරන්න.
2. Unpack all components and lay them out, identifying each part according to the provided parts list (if separate from this manual).
3. Ensure all hardware is sorted and easily accessible.

4.2 පියවරෙන් පියවර එකලස් කිරීම

1. රාමුව එකලස් කරන්න: Begin by connecting the side panels to the base and top panels using the provided screws. Ensure all connections are secure but do not overtighten until the entire frame is upright.
2. පසුපස පැනල් ස්ථාපනය කරන්න: Slide or attach the back panels into the designated grooves or screw points.
3. ලාච්චු එකලස් කරන්න: Construct the two drawers. Pay close attention to the orientation of the drawer slides and the central support for the drawer mechanism. Incorrect orientation can prevent drawers and doors from closing properly.
   

   Figure 2: Detail of adjustable shelves, drawer, and lock mechanism.

4. ලාච්චු ඇතුළු කරන්න: Carefully slide the assembled drawers into their respective compartments. Test their movement.
5. දොරවල් අමුණන්න: Mount the four swing doors to the cabinet frame using the hinges. Ensure the rubber buffers are placed to allow for silent closing. Adjust hinges if necessary for proper alignment.
6. Install Locks: Secure the cylinder locks into the doors. Each lock comes with two keys. Test all locks to ensure they function correctly.
7. Place Adjustable Shelves: Insert the shelf pins into the desired height slots. Place the shelves onto the pins. The shelves are adjustable to accommodate various item sizes.
   

   Figure 3: Detail of adjustable shelf brackets.

8. අවසාන පරීක්ෂාව: Verify all screws are tightened, doors open and close smoothly, and drawers slide without obstruction.

For visual guidance, refer to the assembly diagrams provided in the separate assembly manual (if included) or the product images showing the assembled unit.

5. මෙහෙයුම

5.1 දොරවල්

The cabinet features four swing doors. To open, turn the key in the lock and pull the handle. To close, push the door firmly until it engages with the magnetic catch or lock mechanism, then turn the key to secure. The rubber buffers ensure quiet operation.

5.2 ලාච්චු

The two drawers are designed for smooth operation. Pull the handle to open and push to close. Each drawer has its own lock for securing contents. Insert the key and turn to lock or unlock.

5.3 සකස් කළ හැකි රාක්ක

The three adjustable shelves allow for flexible storage configurations. To adjust a shelf, remove all items from it, lift the shelf, and reposition the shelf pins into the desired slots on the cabinet sides. Ensure all four pins are securely seated before placing items back on the shelf.

Figure 4: Key features of the cabinet, including adjustable storage and secure locking.

6. නඩත්තු කිරීම

To ensure the longevity and appearance of your TecTake Metal Office Cabinet, follow these simple maintenance guidelines:

• පිරිසිදු කිරීම: මෘදු, d රෙදි කඩකින් සියලුම මතුපිට පිස දමන්න.amp cloth. For stubborn marks, a mild soap solution can be used. Avoid abrasive cleaners or harsh chemicals, as these can damage the powder-coated finish. Dry thoroughly after cleaning.
• Locks and Hinges: Periodically check the locks and hinges for smooth operation. If they become stiff, a small amount of silicone-based lubricant can be applied.
• ස්ථාවරත්වය: Regularly check that all screws and connections remain tight. Retighten if necessary to maintain the cabinet's stability.
• බර බෙදා හැරීම: Distribute weight evenly across shelves and drawers to prevent warping or instability.

7. දෝශ නිරාකරණය

ඔබේ කැබිනට් මණ්ඩලයේ ගැටළු ඇති වුවහොත්, පහත සඳහන් පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:

8. පිරිවිතර

Key technical specifications for the TecTake Metal Office Cabinet:

Figure 5: Dimensions of the TecTake Metal Office Cabinet.

9. වගකීම් සහ සහාය

Specific warranty information for this product is not provided in the available data. Please refer to your purchase documentation or contact the retailer/manufacturer directly for details regarding warranty coverage and customer support.

For technical assistance or inquiries about replacement parts, please contact TecTake customer service through their official webවෙබ් අඩවිය හෝ ඔබගේ මිලදී ගැනීම සමඟ සපයා ඇති සම්බන්ධතා තොරතුරු.