xTool D1 Pro 20W ලේසර් කැටයම්කරු උපදෙස් අත්පොත

1. හැඳින්වීම

This manual provides essential information for the safe and effective use of your xTool D1 Pro 20W Laser Engraver. Please read this document thoroughly before operating the device to ensure proper setup, operation, and maintenance. Adherence to these instructions will help prevent damage to the machine and ensure user safety.

2. නිෂ්පාදන අවසන්view

The xTool D1 Pro 20W is a high-power diode laser engraver and cutter designed for precision work on various materials. It features a 20W output diode laser module and a 120W machine power, enabling efficient cutting and engraving tasks.

ප්රධාන ලක්ෂණ:

• අධි බල ප්‍රතිදානය: 20W laser for cutting materials up to 10mm wood or 8mm black acrylic in a single pass.
• Precision and Speed: 0.08mm compressed spot technology and 1000 DPI resolution for clean cuts. Maximum processing speed of 24000mm/min for efficient operation.
• ආරක්ෂිත විශේෂාංග: Equipped with X&Y axis limit switches for accurate positioning and collision prevention. Includes a flame sensor for detecting and alarming in case of fire. The laser module features an eye-protecting hood.
• කල්පැවැත්ම: Constructed with high-precision wear-resistant slide rails and 4-way hard limiters, offering a lifespan of up to 10,000 hours.
• මෘදුකාංග අනුකූලතාව: Compatible with xTool Creative Space (XCS) and LightBurn software.
• සම්බන්ධතාවය: Supports Wi-Fi, USB cable, and TF card connections.

නිෂ්පාදන දර්ශන:

3. පිහිටුවීම

The xTool D1 Pro is designed for straightforward assembly. Follow the detailed instructions provided in the separate assembly guide included with your product packaging. Ensure all components are securely fastened before proceeding to operation.

Initial Assembly Steps:

1. සියලුම සංරචක ඉවත් කර ඇසුරුම් ලැයිස්තුවට අනුව සත්‍යාපනය කරන්න.
2. Assemble the frame according to the provided diagrams.
3. ලේසර් මොඩියුලය ගැන්ට්‍රිය මත ස්ථාපනය කරන්න.
4. Connect all necessary cables (power, USB).
5. Ensure the work area is clear and well-ventilated.

4. මෙහෙයුම් උපදෙස්

The xTool D1 Pro can be operated using either xTool Creative Space (XCS) or LightBurn software. Both platforms offer tools for design, project management, and machine control.

Software and Connectivity:

• xTool Creative Space (XCS): A user-friendly platform with a library of projects and elements. Supports Windows and macOS.
• LightBurn: Advanced laser control software compatible with the D1 Pro.
• සම්බන්ධතා ක්රම: Connect the engraver to your computer via Wi-Fi, USB cable, or use a TF card for offline operation.

Basic Operation Workflow:

1. Prepare your material and place it securely on the work surface.
2. Open your chosen software (XCS or LightBurn) and create or import your design.
3. Adjust laser parameters (power, speed, passes) according to the material type and desired effect. Refer to material settings guides for recommendations.
4. Connect the machine and frame the work area to ensure correct positioning.
5. Initiate the engraving or cutting process. Monitor the machine during operation.

5. නඩත්තු කිරීම

Regular maintenance ensures the longevity and optimal performance of your xTool D1 Pro. Perform these tasks periodically:

• ලේසර් කාචය පිරිසිදු කිරීම: Gently clean the laser lens with a lint-free cloth and isopropyl alcohol to maintain laser beam quality.
• වැඩ කරන ප්‍රදේශය පිරිසිදු කිරීම: Remove debris and dust from the work bed and surrounding areas after each use to prevent accumulation.
• ලිහිසි කිරීමේ මාර්ගෝපදේශ රේල් පීලි: Periodically apply a small amount of lubricant to the guide rails to ensure smooth movement of the laser module.
• Checking Belts: Inspect the synchronous belts for tension and wear. Adjust or replace if necessary.
• ස්ථිරාංග යාවත්කාලීන කිරීම්: Regularly check for and install firmware updates for the machine and software to ensure compatibility and access to new features.

6. දෝශ නිරාකරණය

This section addresses common issues you might encounter. For more complex problems, refer to the official xTool support resources.

පොදු ගැටළු සහ විසඳුම්:

• යන්ත්‍රය සම්බන්ධ නොවේ:
  - Verify USB cable connection or Wi-Fi settings.
  - Ensure the machine is powered on.
  - Restart the software and the machine.
• ලේසර් වෙඩි නොතබන/දුර්වල ප්‍රතිදානය:
  - Check if the laser module is properly seated.
  - ලේසර් කාචය පිරිසිදු කරන්න.
  - Verify laser power settings in the software.
  - Ensure the material is within the focal range.
• සාවද්‍ය කැටයම්/කැපීම:
  - Check belt tension; loose belts can cause skipped steps.
  - Ensure the material is firmly secured and not moving.
  - Verify design dimensions and machine calibration.
• Flame Sensor Alarm:
  - Immediately stop the operation.
  - Check for actual flames or excessive smoke.
  - Ensure proper ventilation and clear the work area of flammable materials.
  - If no fire is present, clean the sensor or consult support if it persists.
• Limit Switch Triggered:
  - The machine has reached its physical boundary. Adjust the design or material placement to stay within the working area.

7. පිරිවිතර

8. වගකීම් සහ සහාය

The xTool D1 Pro 20W Laser Engraver comes with a වසර 1ක නිෂ්පාදකයාගේ වගකීමක්. මෙම වගකීම් සහතිකය සාමාන්‍ය භාවිතය යටතේ ද්‍රව්‍ය හා වැඩ කිරීමේ දෝෂ ආවරණය කරයි.

For technical assistance, warranty claims, or further inquiries, please contact xTool customer support through their official website or the contact information provided in your product packaging. When contacting support, please have your model number (MXD-K001-004) and purchase details readily available.