Amazon Basics Keyless Entry Door Lock Deadbolt User Manual

හැඳින්වීම

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Amazon Basics Keyless Entry Door Lock Deadbolt. Designed for convenience and security, this electronic keypad deadbolt offers keyless access with customizable security codes and an automatic locking feature. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

පැකේජයේ අන්තර්ගතය

ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න:

• Electronic Keypad Deadbolt Assembly (Exterior and Interior Units)
• අගුල් යාන්ත්රණය
• වැඩ වර්ජන තහඩුව
• ඉස්කුරුප්පු පැකේජය
• Keys (for traditional key option)
• ස්ථාපන ආකෘතිය

The image above displays the complete set of parts you should find in your product package, including the electronic keypad unit, the interior deadbolt assembly, the latch, strike plate, screws, and traditional keys.

සැලසුම

ස්ථාපනය කිරීමට පෙර

• Ensure your door thickness is between 1-3/8 to 1-3/4 inches (35mm to 44mm).
• Verify the backset (distance from door edge to center of bore hole) is either 2-3/8 inches (60mm) or 2-3/4 inches (70mm).
• Prepare the necessary tools: Phillips head screwdriver, tape measure, pencil.
• The lock requires 4 AA batteries (not included). Install fresh batteries before final assembly.

ස්ථාපන පියවර

Follow these general steps for installation. For detailed, step-by-step instructions, refer to the included printed manual or the official වගකීම් (PDF) document which often contains installation guides.

1. දොර සකස් කරන්න: Use the provided installation template to mark and drill holes if your door is not pre-drilled. Ensure the correct backset is selected.



The template provides clear markings for drilling holes, ensuring proper alignment for the deadbolt mechanism and keypad. It supports both 60mm and 70mm backsets.

2. අගුල ස්ථාපනය කරන්න: Insert the latch into the door edge, ensuring the correct orientation for your door swing. Secure it with screws.
3. බාහිර එකලස් කිරීම ස්ථාපනය කරන්න: බාහිර යතුරු පෑඩ් එකලස් කිරීම දොර මත තබන්න, අගුල හරහා ස්පින්ඩලය පෙළගස්වන්න.
4. අභ්‍යන්තර සවිකිරීමේ තහඩුව ස්ථාපනය කරන්න: Secure the interior mounting plate to the exterior assembly using screws, ensuring it is flush against the door.
5. අභ්යන්තර එකලස් කිරීම ස්ථාපනය කරන්න: බාහිර එකලස් කිරීමේ සිට අභ්‍යන්තර එකලස් කිරීම දක්වා කේබලය සම්බන්ධ කරන්න. අභ්‍යන්තර එකලස් කිරීම සවිකරන තහඩුවට අමුණන්න.



This image shows the electronic keypad deadbolt installed on the exterior side of a door, ready for operation. The matte black finish blends seamlessly with the door.



පැත්ත view illustrates how the deadbolt integrates with the door frame, providing a secure locking mechanism. The internal components are neatly concealed.

6. බැටරි ස්ථාපනය කරන්න: Remove the battery cover on the interior assembly and insert 4 new AA batteries, observing polarity. Replace the cover.
7. දොර භාරදීමේ ක්‍රියාවලිය සිදු කරන්න: This step calibrates the lock to your door's orientation. Follow the specific instructions in your printed manual for this crucial step.

මෙහෙයුම් උපදෙස්

පරිශීලක කේත ක්‍රමලේඛනය කිරීම

Your deadbolt comes with a default programming code. You will use this code to set up to 6 unique user codes for family members or temporary single-use codes for guests. Refer to your printed manual for the exact sequence of button presses to add, delete, or modify user codes.

අගුළු ඇරීම සහ අගුළු හැරීම

The lock can be operated using the keypad or a traditional key.

• අගූලු දැමිමට: ඔබන්න අගුළු දමන්න button (top right button with lock icon) on the keypad. The deadbolt will extend.
• අගුළු ඇරීමට: Enter your valid user code, then press the අගුළු හරින්න button (top left button with unlock icon). The deadbolt will retract.
• ස්වයංක්‍රීය අගුලු දැමීම: The deadbolt features an automatic locking function, which can be set to engage 10 to 99 seconds after entry. This provides added peace of mind, ensuring your door is always secured.
• අතින් මෙහෙයුම: From the interior, the deadbolt can be manually locked or unlocked using the thumb turn. From the exterior, a traditional key can be used as a backup.

The keypad features illuminated numbers for easy visibility in low light conditions, along with dedicated lock and unlock buttons at the top. The traditional keyhole is located below the keypad.

නඩත්තු කිරීම

බැටරි ප්රතිස්ථාපනය

The electronic deadbolt is powered by 4 AA batteries. When the batteries are low, the lock may emit a warning sound or the keypad lights may flash. To replace the batteries:

1. Remove the battery cover located on the interior side of the deadbolt assembly. This cover typically slides upwards or detaches with a gentle pull.
2. පැරණි බැටරි ප්රවේශමෙන් ඉවත් කරන්න.
3. නිවැරදි ධ්‍රැවීයතාව (+/-) සහතික කරමින් නව AA බැටරි 4ක් ඇතුළු කරන්න.
4. Replace the battery cover, making sure it clicks securely into place.

Regularly check battery levels to ensure uninterrupted operation. High usage may require more frequent battery changes.

පිරිසිදු කිරීම

Clean the keypad and lock body with a soft, damp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක භාවිතා කිරීමෙන් වළකින්න, මන්ද මේවා නිමාව සහ ඉලෙක්ට්‍රොනික උපාංගවලට හානි කළ හැකිය.

දෝෂගවේෂණය

If you encounter issues with your Amazon Basics Keyless Entry Door Lock Deadbolt, refer to the following common problems and solutions:

If these solutions do not resolve the issue, please contact Amazon Basics customer support for further assistance.

පිරිවිතර

වගකීම් සහ සහාය

For warranty information regarding your Amazon Basics Keyless Entry Door Lock Deadbolt, please refer to the official warranty document provided with your product or available online:

වගකීම් සහතිකය බාගන්න (PDF)

For additional support, troubleshooting assistance, or to inquire about replacement parts, please visit the ඇමසන් මූලික වෙළඳසැල නැතහොත් ඇමසන් පාරිභෝගික සේවාව කෙලින්ම අමතන්න.