නිෂ්පාදනය අවසන්view
The Lanzar VBE420P is a 4-band parametric equalizer designed to enhance your audio system with precise sound control. Featuring a 9 Volt RMS pre-amp output and selectable dual input sources (RCA and auxiliary), this unit allows for detailed adjustment of bass, mid-bass, mid, and high frequencies. It includes dedicated subwoofer gain control and a fader for front/rear speaker balance, ensuring a customized and immersive listening experience. Its compact half-DIN size makes it suitable for various installations.
පෙට්ටියේ ඇති දේ
Image: The Lanzar VBE420P 4-Band Parametric Equalizer shown with its packaging and included accessories.
- Lanzar VBE420P 4-Band Parametric Equalizer with Subwoofer
- 2 සවි කිරීම් වරහන්
- 8 ෆිලිප්ස්-හිස් ඉස්කුරුප්පු
- 1A ෆියුස් සහිත බල රතු වයරය
- පෙර-amp Line Aux Inputs via RCA & Phone Jacks
සැකසුම සහ ස්ථාපනය
සවි කිරීම
The VBE420P features a half-DIN size, allowing for flexible installation in various vehicle dashboards or custom locations. Use the provided mounting brackets and screws to secure the unit. Ensure the mounting location allows for proper ventilation and access to controls.
Image: The Lanzar VBE420P Equalizer seamlessly integrated into a car's dashboard, demonstrating its compact size and potential for discreet installation.
රැහැන් සම්බන්ධතා
රූපය: සවිස්තරාත්මක view of the rear panel of the Lanzar VBE420P, highlighting the RCA input and output jacks for various audio components.
- බල සම්බන්ධතාවය: Connect the red power wire (with 1A fuse) to a switched 12V power source. Connect the black ground wire to a clean chassis ground. Connect the remote turn-on wire to your head unit's remote output.
- ආදාන මූලාශ්ර: The unit supports two input sources. Use the RCA input jacks for your main audio source (e.g., head unit). An auxiliary input is also available for connecting portable devices like MP3 players or phones.
- ප්රතිදාන සම්බන්ධතා: Connect the RCA outputs (Front, Rear, Subwoofer) to your power amplifiers. The subwoofer output provides a 9 Volt RMS pre-amp signal for powerful bass.
Operating the Equalizer
Image: The front control panel of the Lanzar VBE420P, illustrating the various knobs and switches for adjusting audio settings.
ඉදිරිපස පැනල් පාලන
- ශබ්ද පාලනය: Adjusts the overall output volume of the equalizer.
- Fader (Front/Rear): Balances the audio output between the front and rear speakers.
- Subwoofer Gain Control: Adjusts the output level of the subwoofer channel.
- සබ් වූෆර් සංඛ්යාත පාලනය: Allows adjustment of the subwoofer crossover frequency between 60Hz and 90Hz.
- සමකරන පටි: Seven adjustable bands (50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 6KHz, 16KHz) allow for precise tuning of specific frequency ranges. Each band can be adjusted from -12dB to +12dB.
- ආදාන තේරීම් ස්විචය: Toggles between the main RCA input and the auxiliary input.
- ආලෝකකරණ තේරීම් ස්විචය: Controls the blue light illumination of the unit.
නඩත්තු කිරීම
To ensure long-lasting performance of your Lanzar VBE420P equalizer, follow these simple maintenance guidelines:
- පිරිසිදු කිරීම: Use a soft, dry cloth to wipe the exterior of the unit. Avoid abrasive cleaners or solvents that could damage the finish.
- පරිසරය: Keep the equalizer away from excessive heat, moisture, and direct sunlight. Ensure adequate ventilation around the unit.
- සම්බන්ධතා: සියලුම රැහැන් සම්බන්ධතා ආරක්ෂිත සහ විඛාදනයෙන් තොර බව සහතික කිරීම සඳහා වරින් වර පරීක්ෂා කරන්න.
දෝෂගවේෂණය
If you encounter issues with your Lanzar VBE420P, refer to the following common problems and solutions:
- බලය නැත: Check the power, ground, and remote turn-on connections. Ensure the 1A fuse is intact.
- ශබ්දයක් නැත: Verify all RCA input and output connections. Check the input selector switch to ensure the correct source is selected. Confirm that connected ampලයිෆයර් ක්රියාත්මක කර ක්රියාත්මක වේ.
- විකෘතිය: Reduce the input level from your head unit or the equalizer's volume control. Ensure all equalizer bands are not set to extreme boost levels. Check for proper grounding.
- Uneven Sound (Left/Right): Adjust the fader control to balance the sound between front and rear speakers. Check individual channel RCA connections.
පිරිවිතර
Image: The Lanzar VBE420P Equalizer displaying its physical dimensions: 7 inches (length), 4.1 inches (width), and 1.10 inches (height).
| විශේෂාංගය | පිරිවිතර |
|---|---|
| ආදර්ශ අංකය | VBE420P |
| අයිතම මානයන් (L x W x H) | අඟල් 7 x 4.1 x 1.1 |
| අයිතමයේ බර | රාත්තල් 1.67 කි |
| පෙර-Amp ප්රතිදාන වෙළුමtage | 9 Volt RMS |
| මෙහෙයුම් වෙළුමtage | 11V - 15V (DC) |
| Number of Equalizer Bands | 4 (Bass, Mid-Bass, Mid, High) |
| Frequency Adjustment Range | කලාපයකට -12dB සිට +12dB දක්වා |
| සබ්වෝෆර් සංඛ්යාත පාලනය | 60Hz - 90Hz |
| ආදාන මූලාශ්ර | RCA, සහායක |
| ද්රව්ය | ලෝහ, ප්ලාස්ටික් |
| වර්ණය | කළු |
| නිෂ්පාදකයා | අවට ශබ්දය |
වගකීම් තොරතුරු
Lanzar products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official Lanzar webවෙබ් අඩවිය. ඕනෑම වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
පාරිභෝගික සහාය
Should you require further assistance or have questions not covered in this manual, please contact Lanzar customer support. Contact information can typically be found on the product packaging or the official Lanzar website. Please have your model number (VBE420P) and purchase details ready when contacting support.
