කණ්ඩායම් ආශ්‍රිත එන්ඩූරෝ එක්ටෝ ට්‍රේල් ට්‍රක් (ASC40117) උපදෙස් අත්පොත

1 ආරක්ෂිත තොරතුරු

WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. The product manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

2. නිෂ්පාදන අවසන්view

The Team Associated Enduro Ecto Trail Truck (ASC40117) is a Ready-to-Run (RTR) remote-controlled vehicle designed for trail crawling. It features a Gatekeeper Suspension (GKS) package with rear trailing arms for improved weight bias and shock tuning, paired with a rear anti-roll bar for stability. The truck includes an adjustable aluminum track bar mount for responsive steering and shock mount inserts for precise suspension tuning.

රූපය 1: ඉදිරිපස පැත්ත view of the Team Associated Enduro Ecto Trail Truck.

ප්රධාන ලක්ෂණ:

• සකස් කළ හැකි ඉදිරිපස ධාවන තීරුව
• වානේ 25T සර්වෝ හෝන්
• ෙලෝහ ෙබෝල ෙබයාරිං ඇතුළත්
• බර 5mm විෂ්කම්භය වානේ සබැඳි
• යන්තගත වානේ ඉහළ පතුවළ
• ලෝහ වළලු ආම්පන්න
• යන්ත්‍රගත ආදාන පිනියන් ගියර්
• සීරුමාරු කළ හැකි කැස්ටර් සහිත ඉදිරිපස ඇක්සලය
• අක්ෂය පිටුපස (BTA) සුක්කානම
• ඇලුමිනියම් සුක්කානම් තහඩු
• ඒකාබද්ධ සර්වෝ වින්ච් සවිකිරීම
• නූල් ඇලුමිනියම් කම්පන සිරුරු
• CMS (චැසි සවිකර ඇති සර්වෝ)

රූපය 2: පැත්ත view highlighting the truck's chassis and suspension.

3. පෙට්ටියේ ඇති දේ

• Enduro Ecto Trail Truck, green RTR

4. පිහිටුවීම

As a Ready-to-Run (RTR) model, the Enduro Ecto Trail Truck comes largely pre-assembled. However, some initial setup is required before first use.

4.1 බැටරි ස්ථාපනය

1. වාහනයේ බල ස්විචය අක්‍රිය ස්ථානයේ ඇති බව සහතික කර ගන්න.
2. Locate the battery compartment, typically secured with body clips or a latch.
3. Connect a fully charged compatible battery (not included) to the vehicle's ESC connector.
4. Secure the battery within the compartment using the provided strap or tray.
5. Reattach the body securely.

4.2 සම්ප්‍රේෂක සැකසුම

1. Install the required batteries (typically AA, not included) into the transmitter.
2. Turn on the transmitter, then the vehicle. The transmitter and receiver should automatically bind. Refer to the transmitter's specific manual for binding procedures if necessary.
3. Check steering and throttle response. Adjust trim settings on the transmitter to ensure the wheels are straight and the throttle is neutral when controls are centered.

5. මෙහෙයුම් උපදෙස්

The Enduro Ecto Trail Truck is designed for off-road trail crawling. Familiarize yourself with the controls before operating in challenging terrain.

5.1 මූලික පාලන

• සුක්කානම: Turn left or right to control the direction of the front wheels.
• Throttle Trigger: Pull to move forward, push to brake or reverse.

5.2 රිය පැදවීමේ උපදෙස්

• වාහනයේ ප්‍රතිචාරය දැනීමට සෙමින් ආරම්භ කරන්න.
• Use precise throttle and steering inputs for crawling over obstacles.
• The GKS suspension and adjustable track bar allow for excellent articulation and stability on uneven surfaces.
• Avoid prolonged high-speed operation on rough terrain to prevent damage.

Figure 3: The Enduro Ecto Trail Truck demonstrating its crawling capabilities on rocky terrain.

6. නඩත්තු කිරීම

Regular maintenance ensures optimal performance and longevity of your Enduro Ecto Trail Truck.

6.1 පිරිසිදු කිරීම

• After each use, especially in dusty or muddy conditions, clean the vehicle.
• Use a soft brush or compressed air to remove dirt and debris from the chassis, suspension, and drivetrain components.
• Avoid using water directly on electronic components.

6.2 පරීක්ෂා කිරීම

• Regularly inspect all screws, nuts, and bolts for tightness.
• Check the suspension components (shocks, links) for any signs of wear or damage.
• Examine the tires for punctures or excessive wear.
• සියලුම විදුලි සම්බන්ධතා ආරක්ෂිත බවත් විඛාදනයෙන් තොර බවත් සහතික කර ගන්න.

Figure 4: Detail of the rear bed, showing areas that may accumulate dirt and require cleaning.

7. පිරිවිතර

8. දෝශ නිරාකරණය

If you encounter issues with your Enduro Ecto Trail Truck, consider the following common troubleshooting steps:

• බලය නැත: Ensure the battery is fully charged and correctly connected. Check the vehicle's and transmitter's power switches.
• Loss of Control/Signal: Verify the transmitter and receiver are properly bound. Check for interference from other 2.4GHz devices. Ensure transmitter batteries are fresh.
• දුර්වල කාර්ය සාධනය: Inspect wheels and tires for debris or damage. Check suspension components for proper movement and ensure no parts are binding. Verify motor and ESC connections.
• අසාමාන්ය ශබ්ද: Stop operation immediately. Inspect gears for damage or foreign objects. Check bearings and axles.

For more detailed troubleshooting, refer to the comprehensive manual provided with your product or contact Team Associated customer support.

9. වගකීම් සහ සහාය

For warranty information, technical support, or replacement parts, please refer to the official Team Associated webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුවට කෙලින්ම සම්බන්ධ වන්න. ඕනෑම වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.