SILCA Sicuro Titanium Water Bottle Cage (V2, SI/160877)

SILCA සිකුරෝ ටයිටේනියම් ජල බෝතල් කූඩු උපදෙස් අත්පොත

වෙළඳ නාමය: SILCA | ආකෘතිය: Sicuro Titanium Water Bottle Cage (V2, SI/160877)

හැඳින්වීම

This manual provides essential information for the proper installation, operation, and maintenance of your SILCA Sicuro Titanium Water Bottle Cage. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.

නිෂ්පාදනය අවසන්view

The SILCA Sicuro Titanium Water Bottle Cage is a lightweight and durable accessory designed for secure bottle retention on bicycles. Crafted from titanium, it offers a balance of strength and minimal weight, featuring a 21mm fore/aft adjustment for precise positioning.

SILCA Sicuro Titanium Water Bottle Cage, front view

රූපය 1: ඉදිරිපස view of the SILCA Sicuro Titanium Water Bottle Cage, showcasing its design and rainbow finish.

SILCA Sicuro Titanium Water Bottle Cage, side view

රූපය 2: පැත්ත view of the SILCA Sicuro Titanium Water Bottle Cage, highlighting its profile and construction.

සැකසුම සහ ස්ථාපනය

  1. සවිකිරීමේ ස්ථාන සකස් කරන්න: Locate the two threaded inserts on your bicycle frame, typically on the down tube or seat tube. Ensure these are clean and free of debris.
  2. කූඩුව ස්ථානගත කරන්න: Align the mounting slots on the SILCA Sicuro cage with the threaded inserts on your frame. The cage features 21mm of fore/aft adjustment, allowing you to slide it up or down to your preferred position.
  3. බෝල්ට් සමඟ ආරක්ෂිත කරන්න: Insert two appropriate M5 bolts (not included with the cage) through the cage's mounting slots and into the frame's threaded inserts.
  4. බෝල්ට් තද කරන්න: Using an appropriate hex key, tighten the bolts evenly until the cage is secure. Do not overtighten, as this can damage the frame or the cage. Ensure the cage does not rotate or move when firm pressure is applied.
  5. Test Fit Bottle: Insert a water bottle into the cage to confirm a secure fit and proper clearance.
SILCA Sicuro Titanium Water Bottle Cage installed on a bicycle frame

රූපය 3: The water bottle cage securely installed on a bicycle frame, demonstrating proper alignment and fit.

වීඩියෝ 1: ඕවර් එකක්view of the Titanium Water Bottle Cage, demonstrating its features and installation process. This video is provided by the seller.

මෙහෙයුම් උපදෙස්

The SILCA Sicuro Titanium Water Bottle Cage is designed for straightforward use:

  • Inserting a Bottle: Gently slide your water bottle into the cage from the top. The cage's design ensures a snug fit, holding the bottle securely.
  • Removing a Bottle: Pull the water bottle firmly upwards to remove it from the cage. The cage's flexible yet secure design allows for easy in-and-out access during rides.
  • ගැළපුම: This cage is optimized for standard bicycle water bottles.

නඩත්තු කිරීම

To ensure the longevity and performance of your water bottle cage, follow these maintenance guidelines:

  • පිරිසිදු කිරීම: Wipe the cage with a damp cloth to remove dirt and grime. For stubborn marks, a mild soap solution can be used, followed by rinsing and drying.
  • පරීක්ෂාව: Periodically inspect the cage for any signs of damage, such as cracks or bends. Check the mounting bolts for tightness and re-tighten if necessary.
  • ද්රව්ය රැකවරණය: Titanium is highly corrosion-resistant. Avoid using abrasive cleaners or tools that could scratch the surface.

දෝෂගවේෂණය

කලාපයවිය හැකි හේතුවවිසඳුම
Bottle feels loose in cage.Cage may have slightly widened over time or bottle is undersized.Gently bend the cage arms inward slightly to increase tension. Ensure your bottle is a standard size.
Bottle falls out during rides.Insufficient tension or improper bottle size.Adjust cage tension as described above. Verify bottle compatibility. For very rough terrain, consider additional bottle retention methods if issues persist.
Cage is rattling.ලිහිල් සවි කිරීම් බෝල්ට්.Check and tighten the mounting bolts securely.

පිරිවිතර

  • වෙළඳ නාමය: සිල්කා
  • ආකෘතිය: Sicuro Titanium Water Bottle Cage (V2)
  • අයිතම ආදර්ශ අංකය: SI/160877
  • ද්රව්ය: ටයිටේනියම්
  • වර්ණය: Rainbow (as per product variant)
  • නිෂ්පාදන මානයන්: 7"අඟල් x 4"අඟල් x 4"උ
  • අයිතමයේ බර: අවුන්ස 1.6 කි
  • ගැලපීම: 21mm Fore/Aft
  • UPC: 810093160877
  • නිෂ්පාදනය: Hand bent and laser welded in Indiana, USA.

වගකීම් සහ සහාය

For warranty information or technical support, please refer to the official SILCA webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවයට සෘජුවම සම්බන්ධ වන්න. ඕනෑම වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

නිල Webඅඩවිය: www.silca.cc

අදාළ ලියකියවිලි - Sicuro Titanium Water Bottle Cage (V2, SI/160877)

පෙරview සිල්කා ෆියුචුරා ඇමරිකා එක්සත් ජනපදයේ ඉක්මන් ආරම්භක මාර්ගෝපදේශය: සැකසුම සහ ක්‍රියාකාරිත්වය
Silca Futura USA යතුරු කැපුම් යන්ත්‍රය සමඟ ඉක්මනින් ආරම්භ කරන්න. මෙම මාර්ගෝපදේශය කාර්යක්ෂම ක්‍රියාකාරිත්වය සඳහා මූලික සැකසුම, ටැබ්ලට් සම්බන්ධතාවය, මෘදුකාංග වින්‍යාසය සහ මූලික සංචාලනය ආවරණය කරයි.
පෙරview Manual de Instrucciones SILCA Twister II NA: Guía Completa de Uso y Mantenimiento
Manual de instrucciones detallado para la máquina duplicadora de llaves SILCA Twister II NA. Cubre instalción, operación, mantenimiento, seguridad y especificaciones tecnicas para duplicar llaves punzonadas, de regatas (láser) y FICHET.
පෙරview SILCA D844063ZB Fastbit අතින් යතුරු කැපුම් යන්ත්‍රය
සිල්කා විසින් අතින් යතුරු කැපුම් යන්ත්‍රයක් වන Fastbit D844063ZB, බිට්, ද්විත්ව බිට් (පිරිමි සහ ගැහැණු), පොම්ප යතුරු සහ මධ්‍යම නැවතුම් යතුරු ඇතුළු විවිධ යතුරු වර්ග අනුපිටපත් කිරීම සඳහා සුදුසු වේ. එය පරිශීලක-හිතකාමී නිර්මාණයක්, උසස් තත්ත්වයේ ද්‍රව්‍ය, වසන්ත-පටවන ලද ක්ෂුද්‍රමිතික ට්‍රේසර් ලක්ෂ්‍යයක්, ස්වයං-කේන්ද්‍රගත cl වලින් සමන්විත වේ.amps, සහ නිරවද්‍ය සහ විශ්වාසනීය ක්‍රියාකාරිත්වය සඳහා ergonomic පාලනයන්.
පෙරview SILCA RW4 Plus මෙහෙයුම් අත්පොත: ට්‍රාන්ස්පොන්ඩර් යතුරු අනුපිටපත් කිරීමේ මාර්ගෝපදේශය
SILCA RW4 Plus ට්‍රාන්ස්පොන්ඩර් යතුරු අනුපිටපත් යන්ත්‍රය සඳහා සවිස්තරාත්මක මෙහෙයුම් අත්පොත. වාහන යතුරු ක්‍රමලේඛනය සඳහා විශේෂාංග, ස්ථාපනය, ක්‍රියාත්මක කිරීම, නඩත්තු කිරීම සහ දෝශ නිරාකරණය ආවරණය කරයි.
පෙරview සිල්කා ට්විටර් II NA යතුරු කැපීමේ යන්ත්‍ර මෙහෙයුම් අත්පොත
සිල්කා ට්විටර් II NA යතුරු කැපීමේ යන්ත්‍රය සඳහා වන පුළුල් මෙහෙයුම් අත්පොත, එහි විශේෂාංග, ස්ථාපනය, ක්‍රියාකාරිත්වය, නඩත්තුව සහ විවිධ යතුරු වර්ග වන ඩිම්පල්, ලේසර් සහ FICHET යතුරු සඳහා ආරක්ෂක ක්‍රියා පටිපාටි විස්තර කරයි.
පෙරview SILCA TECHLA 3.0 සේවා අත්පොත: මෙහෙයුම් සහ නඩත්තු මාර්ගෝපදේශය
SILCA TECHLA 3.0 කැටයම් සහ යතුරු කැපුම් යන්ත්‍රය සඳහා සවිස්තරාත්මක සේවා අත්පොත. ප්‍රශස්ත ක්‍රියාකාරිත්වය සඳහා පද්ධති ක්‍රියාකාරිත්වය, යාවත්කාලීන කිරීම්, දෝශ නිරාකරණය සහ නඩත්තු ක්‍රියා පටිපාටි ආවරණය කරයි.