හැඳින්වීම
The Protmex HT609 is a versatile 3-in-1 portable gas leak detector designed to identify combustible gas leaks, measure ambient temperature, and relative humidity. This device provides audible, visual, and screen-based alarms to ensure safety and assist in pinpointing potential leak sources in various environments. Its compact design and multiple sensitivity modes make it a valuable tool for both household and professional use.
Figure 1: Protmex HT609 Gas Leak Detector and accessories.
ආරක්ෂිත තොරතුරු
WARNING: Always prioritize safety when dealing with gas leaks. This device is a detection tool and should not replace professional inspection or emergency procedures. Evacuate the area immediately if a strong gas odor is detected and contact emergency services.
- Ensure proper ventilation when testing for gas leaks.
- Do not use the device in environments with extremely high concentrations of gas, which could pose an explosion risk.
- උපාංගය ජලයෙන් හා අධික උෂ්ණත්වයෙන් ඈත් කරන්න.
- උපාංගය විසුරුවා හැරීමට හෝ වෙනස් කිරීමට උත්සාහ නොකරන්න.
- Always allow the device to warm up fully before use to ensure accurate readings.
නිෂ්පාදනය අවසන්view
ප්රධාන ලක්ෂණ:
- 3-in-1 ක්රියාකාරීත්වය: Combines gas leak detection with temperature and humidity measurement. Temperature units are switchable between Fahrenheit (℉) and Celsius (℃).
- සකස් කළ හැකි සංවේදීතාව: Features High, Medium, and Low sensitivity settings to adapt to different leak sizes and environments.
- Triple Alarm System: Provides visual (green, orange, red display), audible (buzzer), and screen-based alarms. Alarm frequency and bar graph increase with gas concentration.
- සංයුක්ත සහ අතේ ගෙන යා හැකි: Ergonomic design with a 2.24-inch LCD display for easy one-handed operation and clear visibility in various lighting conditions.
- පුළුල් යෙදුම: Detects various combustible gases including LPG, methane, ethane, propane, butane, natural gas, coal gas, fuel gas, sewer gas, and liquefied natural gas.
- ස්වයංක්රීය බලය අක්රිය (APO): Includes an APO function for battery saving, which can be disabled.
සංරචක:
Figure 2: Key components and dimensions of the HT609.
- සංවේදකය: Located at the top, protected by a cap.
- සංදර්ශක තිරය: 2.24-inch LCD for readings and indicators.
- බල බොත්තම: උපාංගය සක්රිය / අක්රිය කිරීමට.
- SENS Button: To adjust sensitivity (Low, Medium, High).
- ℃/℉ බොත්තම: To switch temperature units.
- APO Button: To cancel or enable Automatic Power Off.
- Buzzer On/Off Button: To control the audible alarm.
- බැටරි මැදිරිය: Located at the rear, for 3 AAA batteries.
සැලසුම
- බැටරි ස්ථාපනය:
Locate the battery compartment on the back of the device. Use the provided screwdriver to open the compartment. Insert 3 AAA batteries, ensuring correct polarity. Close the compartment and secure it with the screws.
- මූලික බලය සක්රිය කිරීම:
බල බොත්තම ඔබා අල්ලාගෙන සිටින්න (⏻ ⏻ ශ්රේණිය) to turn on the device. The device will display "WAIT" and undergo a warm-up period of approximately 30 seconds. During this time, ensure the device is in a clean air environment, free from any gas sources, to allow for proper calibration. The device will emit two "Beeps" when warm-up is complete and it is ready for use.
Figure 3: Sensor warm-up and response time.
මෙහෙයුම
ගෑස් කාන්දු හඳුනාගැනීම:
- උණුසුම් වන්න: After powering on, wait for the 30-second warm-up period to complete.
- සංවේදීතා තේරීම:
ඔබන්න SENS button to cycle through the sensitivity modes: High (H), Medium (M), and Low (L). The selected mode will be indicated on the display.
- High Sensitivity (H): Ideal for detecting small gas leaks or pinpointing the exact source. The buzzer activates when the signal reaches the second grid.
- Medium Sensitivity (M): A balanced setting for general detection. The buzzer activates when the signal reaches the fifth grid.
- Low Sensitivity (L): Suitable for detecting larger gas leaks. The buzzer activates when the signal reaches the eighth grid.
Figure 4: Sensitivity modes and alarm thresholds.
- Scanning for Leaks:
Slowly move the sensor tip close to potential leak sources (e.g., gas pipes, appliance connections, valves). Maintain a consistent distance for accurate readings. The device will respond to the presence of combustible gases.
Video 1: Demonstration of the HT609 Gas Leak Detector in use, showing how to scan for leaks near a gas stove and a water heater. The device's display changes from green to red and the alarm sounds when gas is detected.
- Interpreting Alarms:
The HT609 provides a triple alarm system:
- දෘශ්ය අනතුරු ඇඟවීම: The screen backlight changes color (Green: Safe, Orange: Low concentration, Red: High concentration).
- ඇසෙන අනතුරු ඇඟවීම: A buzzer will sound, increasing in frequency as gas concentration rises.
- තිර සංදර්ශකය: The bar graph on the screen will increase, and the numerical reading will change, indicating higher gas levels.
Figure 5: Audio, light, and bar graph alarm indicators.
Temperature and Humidity Measurement:
The device continuously displays ambient temperature and relative humidity on the screen. Press the / button to switch between Celsius and Fahrenheit temperature units.
Figure 6: 3-in-1 functionality for gas, temperature, and humidity.
Automatic Power Off (APO) Function:
The HT609 features an automatic power-off function to conserve battery life. To disable or enable this function, press the APO button. When APO is active, the device will automatically shut down after a period of inactivity.
යෙදුම්
The Protmex HT609 is suitable for a wide range of applications where combustible gas detection is necessary:
- Residential homes: Checking gas stoves, water heaters, furnaces, and gas lines.
- RV and camping: Inspecting gas connections in recreational vehicles and portable gas appliances.
- Industrial settings: Locating leaks in gas pipelines, storage tanks, and industrial equipment.
- Commercial kitchens: Ensuring safety around commercial cooking equipment.
- Anywhere combustible gases like methane, propane, natural gas, LPG, LNG, or fuel gas might be present.
Figure 7: Wide range of applications for the HT609.
නඩත්තු කිරීම
- පිරිසිදු කිරීම: මෘදු වියළි රෙද්දකින් උපාංගය පිස දමන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා නොකරන්න.
- සංවේදක සත්කාරය: Keep the sensor tip clean and free from dust or debris. Avoid touching the sensor directly.
- ගබඩා: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries to prevent leakage.
- බැටරි ආදේශනය: Replace batteries when the low battery indicator appears on the display to ensure optimal performance.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| උපාංගය බලගන්වන්නේ නැත. | මිය ගිය හෝ වැරදි ලෙස ස්ථාපනය කර ඇති බැටරි. | බැටරි ධ්රැවීයතාව පරීක්ෂා කරන්න. නව AAA බැටරි සමඟ ප්රතිස්ථාපනය කරන්න. |
| Inaccurate or inconsistent gas readings. | Insufficient warm-up time; sensor contamination; device not calibrated properly. | Ensure device completes 30-second warm-up in clean air. Clean sensor tip. If issues persist, contact support. |
| ඇසෙන අනතුරු ඇඟවීමක් නැත. | Buzzer function is turned off. | Press the buzzer on/off button to activate the audible alarm. |
| Temperature/Humidity readings seem off. | Environmental factors; sensor issue. | Ensure the device has stabilized in the environment. If readings are consistently inaccurate, contact support. |
පිරිවිතර
| පරාමිතිය | වටිනාකම |
|---|---|
| ආදර්ශ අංකය | HT609 |
| හඳුනාගැනීමේ වායු | Combustible gases (Methane, LPG, LNG, Fuel Gas, etc.) |
| ප්රතිචාර පරාසය | 50-1000 ppm |
| උණුසුම් වීමේ කාලය | ආසන්න වශයෙන්. තත්පර 30 යි |
| ප්රතිචාර කාලය | 2-5 seconds (varies with gas concentration) |
| උෂ්ණත්ව මිනුම් පරාසය | -4 ° F ~ 140 ° F (-20 ° C ~ 60 ° C) |
| ආර්ද්රතාවය මැනීමේ පරාසය | 0% ~ 99.9% RH |
| අනතුරු ඇඟවීමේ වර්ගය | Audible, Visual (3-color backlight), Bar Graph |
| බලශක්ති ප්රභවය | 3 x 1.5V AAA බැටරි |
| අයිතමයේ බර | අවුන්ස 7.8 කි |
| නිෂ්පාදන මානයන් | අඟල් 7.09 x 3.82 x 2.13 |
වගකීම් සහ සහාය
Protmex is committed to providing quality products and customer satisfaction. For any inquiries, technical support, or warranty claims, please contact Protmex customer service. They offer 24/7 online friendly support.
Refer to the official Protmex webනිශ්චිත වගකීම් කොන්දේසි සහ සම්බන්ධතා තොරතුරු සඳහා වෙබ් අඩවිය හෝ ඔබේ මිලදී ගැනීමේ ලියකියවිලි.
නිල පරිශීලක අත්පොත (PDF): PDF බාගන්න
