වැදගත් ආරක්ෂක තොරතුරු
- බර සීමාව: Do not exceed the maximum weight limit of 318 kg (700 lbs). This includes the mattress and occupants.
- Full Assembly: Ensure the bed frame is fully assembled according to the instructions before any use.
- ආරක්ෂිත ගාංචු: Verify all bolts, screws, and connections are securely fastened before placing a mattress on the frame and periodically thereafter.
- දරුවන්: දරුවන් එකලස් කරන ප්රදේශයෙන් ඈත් කර තබන්න. කුඩා කොටස් හුස්ම හිරවීමේ අවදානමක් විය හැකිය.
1. සැකසීම සහ එකලස් කිරීම
The Zinus Yelena bed frame is designed for straightforward assembly. All necessary parts, tools, and instructions are included to complete the setup in under one hour.
1.1 ඇසුරුම් ඉවත් කිරීම සහ කොටස් හඳුනා ගැනීම
Carefully unpack all components from the box. Lay them out on a clean, soft surface to prevent scratches. Refer to the included parts list to identify each component.
Image 1.1: All components of the Zinus Yelena Queen Steel Bed Frame before assembly.
1.2 Frame Assembly Steps
- Connect the side rails to the head and foot sections using the provided bolts and the included wrench. Do not fully tighten bolts until all sections are aligned.
- Attach the center support beam(s) to the designated points on the side rails.
- Insert the steel slats into the frame. Ensure they are evenly spaced and securely seated in their respective slots.
- Once all parts are in place, systematically tighten all bolts. Ensure the frame is stable and level.
Image 1.2: Detail of a leg connection point, illustrating the secure fastening mechanism.
1.3 Headboard Attachment (Optional)
The frame includes pre-drilled holes on the two legs, allowing for easy attachment to any standard-sized headboard. Align the headboard brackets with these holes and secure with appropriate hardware (not included).
2. මෙහෙයුම් සහ විශේෂාංග
2.1 මෙට්ට ස්ථානගත කිරීම
Place your Queen-sized mattress directly onto the steel slats. A box spring is not required for this bed frame.
2.2 Noise Minimization
The steel slats are engineered to minimize noise during use, contributing to a quiet sleep environment. This design also helps to prolong the life of your mattress by providing consistent support.
රූපය 2.1: යටි පැත්ත view of the bed frame, highlighting the robust steel slat system designed for mattress support and noise reduction.
2.3 ඇඳ යට ගබඩා කිරීම
The frame provides 30 cm (approximately 11.8 inches) of clearance between the base and the floor. This ample space is suitable for storing various items, such as storage bins, luggage, or seasonal clothing.
Image 2.2: The bed frame demonstrating the available under-bed storage space, with storage boxes placed beneath.
3. නඩත්තු කිරීම
Regular maintenance ensures the longevity and continued performance of your Zinus Yelena bed frame.
- පිරිසිදු කිරීම: දැන්වීමකින් ලෝහ රාමුව පිස දමන්නamp cloth and mild detergent as needed. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- ගාංචු පරීක්ෂාව: Periodically (e.g., every 3-6 months), inspect all bolts and connections to ensure they remain tight. Re-tighten any loose fasteners to maintain stability and prevent noise.
- ස්ලැට් පරීක්ෂාව: Check the steel slats for any signs of damage or displacement. Ensure they are properly seated to provide optimal mattress support.
4. දෝශ නිරාකරණය
ඔබේ ඇඳ රාමුව සමඟ ඔබට කිසියම් ගැටළුවක් ඇති වුවහොත්, පහත පොදු දෝශ නිරාකරණ උපදෙස් වෙත යොමු වන්න:
4.1 Squeaking or Noise
- බෝල්ට් තද කරන්න: The most common cause of noise is loose fasteners. Re-tighten all bolts on the frame, paying close attention to the leg and rail connections.
- Check Slats: Ensure all steel slats are correctly positioned and fully seated in their holders. Misaligned slats can cause friction and noise.
- Mattress Interaction: Sometimes, noise can come from the mattress rubbing against the frame. Try repositioning the mattress.
4.2 Instability or Wobbling
- එකලස් කිරීම නැවත පරීක්ෂා කරන්න: Review the assembly instructions to ensure all steps were followed correctly and no parts were omitted or incorrectly installed.
- මට්ටම් මතුපිට: Ensure the bed frame is placed on a flat, level surface. Uneven flooring can cause wobbling.
- All Fasteners Tight: Double-check that every bolt and screw is fully tightened.
5. පිරිවිතර
| වෙළඳ නාමය | සයිනස් |
| මාදිලියේ නම | Yelena |
| ආදර්ශ අංකය | AO-MPSC-14Q |
| ප්රමාණය | රැජින |
| ද්රව්ය | වානේ |
| නිෂ්පාදන මානයන් (L x W x H) | 189 cm x 151.6 cm x 36 cm (74.4 in x 59.7 in x 14.2 in) |
| නිෂ්පාදන බර | 15.99 kg (රාත්තල් 35.25) |
| උපරිම බර ධාරිතාව | 318 kg (රාත්තල් 700) |
| විශේෂ ලක්ෂණය | No Box Spring Needed, Under-bed Storage |
රූපය 5.1: මානයන් සහිත උඩින්view of the Zinus Yelena Queen Steel Bed Frame.
6. වගකීම් තොරතුරු
The Zinus Yelena Queen Steel Bed Frame comes with a වසර 5ක සීමිත වගකීමක් මිලදී ගත් දින සිට. මෙම වගකීම් සහතිකය සාමාන්ය භාවිතය යටතේ ද්රව්යවල සහ වැඩ කිරීමේ නිෂ්පාදන දෝෂ ආවරණය කරයි.
The warranty does not cover damage resulting from improper assembly, misuse, abuse, accidents, or normal wear and tear. Any modifications to the product will void the warranty.
වගකීම් හිමිකම් සඳහා කරුණාකර ඔබගේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
7. පාරිභෝගික සහාය
For any questions regarding assembly, missing parts, warranty claims, or general inquiries, please contact Zinus customer support.
- Webඅඩවිය: Visit the official Zinus webසහාය සම්පත් සහ සම්බන්ධතා විකල්ප සඳහා අඩවිය.
- විද්යුත් තැපෑල: Refer to your product packaging or the Zinus website for direct email support.
- දුරකථනය: Contact numbers for customer service can be found on the Zinus webඅඩවිය.
When contacting support, please have your model number (AO-MPSC-14Q) and proof of purchase readily available.
