1. හැඳින්වීම
The Smart Sensor AR991 Grain Moisture Meter is a precision instrument designed for accurately measuring the moisture content of various grains. It features a double sensor for high accuracy, an LCD backlight for visibility in dark environments, and a voice alarm function. This manual provides essential information for the safe and effective use of your device.

Figure 1: Smart Sensor AR991 Grain Moisture Meter in use.
2. නිෂ්පාදන අවසන්view
2.1 ප්රධාන ලක්ෂණ
- මිනුම් පරාසය: Moisture 7.5% to 50%.
- ඉහළ නිරවද්යතාව: Double sensor design ensures precise measurements.
- LCD පසුබිම් ආලෝකය: Enables easy reading in low-light conditions.
- හ A අනතුරු ඇඟවීම: Provides audible notifications and alarms.
- ස්වයංක්රීයව ක්රියා විරහිත කිරීම: Automatically shuts down after 15 minutes of inactivity to conserve battery life.
- Grain Type Selection: Supports 14 types of grains.
- දත්ත රඳවා තබා ගැනීම: Freezes the displayed reading for convenience.
- Deviation Adjustment: Allows for calibration adjustments.
- මතක කාර්යය: Retains settings even after battery removal.

Figure 2: Key features of the AR991 Grain Moisture Meter.
2.2 සංරචක
- Main Unit with LCD Display
- Metal Probes (Double Sensor)
- Probe Protection Cap
- හසුරුවන්න
- Control Buttons (Adjust, Limit, ON/OFF, Varieties, Voice)
- බැටරි (ඇතුළත්)

Figure 3: Labeled diagram of the AR991 components.
3. පිහිටුවීම
- බැටරි ස්ථාපනය කරන්න: Open the battery compartment and insert the included batteries, ensuring correct polarity.
- Remove Probe Protection Cap: Carefully remove the protective cap from the metal probes before use.
4. මෙහෙයුම් උපදෙස්
4.1 බලය සක්රිය / අක්රිය
- බල ගැන්වීමට: ඔබා අල්ලාගෙන සිටින්න සක්රිය / අක්රිය button for approximately 2 seconds until the display shows "ON", then release.
- බලය අක්රිය කිරීමට: ඔබා අල්ලාගෙන සිටින්න සක්රිය / අක්රිය button for approximately 2 seconds until the display shows "OFF", then release.
4.2 ධාන්ය වර්ගය තෝරා ගැනීම
The meter supports 14 different grain types (P0-P13). To select the appropriate grain type:
- ඔබන්න ප්රභේද button to cycle through the grain types (P0 to P13).
- දිගු ඔබන්න ප්රභේද button for 3 seconds to restore the default P0 mode.
4.3 මිනුමක් ගැනීම
- Ensure the correct grain type is selected.
- Carefully insert the metal probes into the grain sample. Ensure the probes are fully immersed and stable.
- The moisture content will be displayed on the LCD screen.
4.4 කටහඬ තේරීම
The meter offers four voice modes:
- d1: Water content announcement.
- d2: High water content announcement.
- d3: නිහඬ මාදිලිය.
- d4: "Didi" sound notification.
ඔබන්න හඬ button to switch between these modes. Long press for 3 seconds to restore d1 mode.

Figure 4: The meter's speaker for voice announcements.
4.5 Deviation Adjustment
To adjust the measurement deviation:
- ඔබන්න සකස් කරන්න button. Each press increases the value by 0.5%. The adjustment range is -3% to +5%.
- දිගු ඔබන්න සකස් කරන්න button for 3 seconds to reset the deviation to 0%.
4.6 Alarm Setting (Limit Key)
ද සීමාව button is used to set a voice prompt value for moisture content. The default setting is 10%.
- The alarm setting range is 10% to 40%.
- ඔබන්න සීමාව button to adjust the alarm threshold.
- දිගු ඔබන්න සීමාව button for 2 seconds to restore the default 10% set value.
5. නඩත්තු කිරීම
- පිරිසිදු කිරීම: After each use, gently wipe the metal probes with a clean, dry cloth to remove any grain residue. Do not use abrasive cleaners or immerse the device in liquids.
- ගබඩා: Always replace the probe protection cap when the meter is not in use to prevent damage to the probes. Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- බැටරි ආදේශනය: When the low battery indicator appears on the LCD, replace the batteries promptly to ensure accurate readings. The memory function ensures your settings are retained even during battery changes.
6. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| උපාංගය බලගන්වන්නේ නැත | මිය ගිය හෝ වැරදි ලෙස ස්ථාපනය කර ඇති බැටරි | බැටරි ධ්රැවීයතාව පරීක්ෂා කරන්න හෝ නව බැටරි සමඟ ප්රතිස්ථාපනය කරන්න. |
| වැරදි කියවීම් | Incorrect grain type selected Probes not fully inserted Deviation setting incorrect | Verify grain type selection. Ensure probes are fully immersed. භාවිතා කරන්න සකස් කරන්න button to correct deviation or reset to 0%. |
| අඩු බැටරි දර්ශකය | බැටරි අඩුයි | බැටරි ප්රතිස්ථාපනය කරන්න. |
| No voice announcement | Silent mode (d3) selected | ඔබන්න හඬ button to switch to d1 or d2 mode. |
7. පිරිවිතර
- ආකෘතිය: AR991
- මිනුම් පරාසය: 7.5% - 50% Moisture
- නිරවද්යතාව: 0.1% / 0.1
- මිනුම් මූලධර්මය: Resistance Method
- සංදර්ශකය: පසුතල ආලෝකය සහිත එල්සීඩී
- ස්වයංක්රීයව ක්රියා විරහිත කිරීම: 15 minutes of no operation
- Supported Grain Types: 14 (Rapeseed, Sesame, Soybean Meal, Cotton, Soybean, Peanut, Barley, Rice, Sorghum, Watermelon Seed, Paddy, Wheat, Maize, Fodder, Jute)
- අයිතමයේ බර: 410 ග්රෑම්
- නිෂ්පාදන මානයන් (LxWxH): 43 x 80 x 425 මි.මී
- ඇතුළත් සංරචක: බැටරි

Figure 5: Dimensions of the AR991 Grain Moisture Meter.
8. වගකීම් සහ සහාය
For technical support or warranty inquiries, please contact the importer:
EEE Instruments Inc.32A Ganesh Chandra Avenue, 4th Floor
Kolkata 700013, India
විද්යුත් තැපෑල: info@tech-3e.com
නිශ්චිත වගකීම් නියමයන් සහ කොන්දේසි සඳහා කරුණාකර ඔබේ මිලදී ගැනීමේ ලියකියවිලි බලන්න.





