MOUNTUP MU2005 Gas Spring Single Monitor Wall Mount

1. හැඳින්වීම

This manual provides instructions for the installation, operation, and maintenance of your MOUNTUP MU2005 Gas Spring Single Monitor Wall Mount. This mount is designed to securely hold computer screens and televisions, offering adjustable positioning for an ergonomic viewing experience. Please read these instructions carefully before installation to ensure safe and correct usage.

2 ආරක්ෂිත තොරතුරු

අවවාදයයි: Improper installation may result in serious personal injury and property damage. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer.

• Do not install on drywall alone. This mount is designed for installation on wood studs, solid concrete walls, or brick walls.
• සවිකරන පෘෂ්ඨය සවිකිරීමේ සහ සංදර්ශකයේ ඒකාබද්ධ බරට ආරක්ෂිතව සහාය විය හැකි බව සහතික කර ගන්න.
• උපරිම බර ධාරිතාව රාත්තල් 26.5 (කිලෝග්‍රෑම් 12) නොඉක්මවන්න.
• Use only the provided hardware. If any parts are missing or defective, contact MOUNTUP customer service.
• ස්ථාපනය අතරතුර ළමුන් සහ සුරතල් සතුන් ඈත් කර තබන්න.
• Periodically check that the mount is secure and all fasteners are tight.

3. පැකේජ අන්තර්ගතය

ස්ථාපනය සමඟ ඉදිරියට යාමට පෙර සියලුම සංරචක පවතින බවත් හානි වී නොමැති බවත් තහවුරු කර ගන්න.

• Monitor Wall Mount Arm (MU2005)
• වීසා තහඩුව
• VESA Extension Kit (for larger VESA patterns)
• සවි කිරීමේ දෘඩාංග (ඉස්කුරුප්පු, නැංගුරම්, රෙදි සෝදන යන්ත්‍ර)
• Hex Keys for Adjustment
• උපදෙස් අත්පොත

Image: Main components of the MOUNTUP MU2005 monitor wall mount, including the gas spring arm, VESA mounting plate, and VESA extension brackets.

4. පිරිවිතර

Image: Detailed diagram illustrating the mount's dimensions, VESA compatibility (75x75, 100x100, 100x200, 200x100, 200x200), weight capacity (4.4-26.5 lbs), and supported screen sizes (22-35 inches).

5. පිහිටුවීම සහ ස්ථාපනය

Before beginning, ensure you have all necessary tools and that your wall type is compatible. This mount is suitable for wood studs, concrete walls, and brick walls. එය වියළි පවුර සඳහා පමණක් නොවේ.

5.1 අනුකූලතා පරීක්ෂාව

Confirm your monitor meets the following criteria:

1. නිරීක්ෂණ ප්රමාණය: අඟල් 22-35
2. අධීක්ෂණ බර: රාත්තල් 4.4-26.5
3. VESA රටාව: 75x75mm, 100x100mm, 100x200mm, 200x100mm, 200x200mm
4. බිත්ති වර්ගය: Wood Stud, Brick Wall, or Concrete Wall

Image: A visual guide to checking monitor compatibility with the mount, covering screen size, weight, VESA pattern, and suitable wall types.

5.2 ස්ථාපන පියවර

1. Install the Arm to the Wall: Securely attach the wall plate of the monitor arm to a wood stud, concrete wall, or brick wall using the appropriate hardware. Ensure it is level and firmly anchored.


Image: Illustration of mounting the arm's wall plate to the wall.

2. Attach VESA Plate to Monitor Back: Fasten the VESA plate to the back of your monitor using the screws that fit your monitor's VESA holes. Use the VESA extension kit if your monitor requires a larger VESA pattern.


Image: Illustration of attaching the VESA plate to the monitor's rear.

3. Attach Monitor onto the Arm: Carefully slide the monitor (with the attached VESA plate) onto the arm's mounting head. Ensure it clicks into place securely.


Image: Illustration of sliding the monitor onto the arm's VESA head.

4. Adjust Gas Spring to Proper Tension: This is crucial for the arm to hold your monitor at the desired height. Refer to the 'Operating' section for detailed adjustment instructions.


Image: Illustration of adjusting the gas spring tension on the arm.

5.3 කේබල් කළමනාකරණය

පිරිසිදු හා සංවිධානාත්මක වැඩබිමක් පවත්වා ගැනීම සඳහා ඔබේ කේබල් අතේ ඇති ඒකාබද්ධ කේබල් කළමනාකරණ නාලිකා හරහා ගමන් කරන්න.

Image: The monitor arm demonstrating its full range of motion, including 360° rotation, 90°/-90° swivel, 90°/-45° tilt, and 11 inches of adjustable height.

6. මොනිටර අත ක්‍රියාත්මක කිරීම

The MOUNTUP MU2005 offers extensive adjustability to achieve optimal viewing කෝණ සහ ergonomic ස්ථානගත කිරීම.

6.1 Gas Spring Adjustment (Monitor Height)

The gas spring allows for effortless height adjustment. If your monitor does not stay at the desired height, adjust the tension:

• Monitor raises up (too light): Turn the screw clockwise ("-" direction) to reduce tension.
• Monitor drops down (too heavy): Turn the screw counter-clockwise ("+" direction) to increase tension.

සටහන: Hold the arm in a horizontal position during adjustment. Refer to the table below for approximate turns based on monitor weight.

Image: Comprehensive guide for adjusting gas spring tension and tilt angle, including a table correlating monitor weight with the number of turns for adjustment.

6.2 ඇලවීමේ කෝණ ගැලපීම

If your monitor faces down or up unintentionally, adjust the tilt tension:

1. Loosen the tilting bolt (Turn to "-" direction).
2. Adjust the monitor to your desired angle.
3. Retighten the tilting bolt (Turn to "+" direction).

Image: Visual instructions for adjusting the gas spring tension and the monitor's tilt angle using a hex key.

6.3 භ්‍රමණය සහ භ්‍රමණය

• The arm can swivel 180° at the wall plate and 360° at the arm joint.
• The VESA plate allows for 180° swivel and 360° rotation, enabling easy switching between portrait and landscape orientations.

Image: The monitor arm demonstrating its full range of motion, including 360° rotation, 90°/-90° swivel, 90°/-45° tilt, and 11 inches of adjustable height.

7. නඩත්තු කිරීම

Regular maintenance ensures the longevity and safe operation of your monitor mount.

• පිරිසිදු කිරීම: මෘදු, d රෙදි කැබැල්ලකින් මවුන්ට් එක පිස දමන්න.amp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන්ගෙන් වළකින්න.
• සම්බන්ධතා පරීක්ෂා කරන්න: Periodically inspect all screws and bolts to ensure they are tight. Retighten if necessary.
• Gas Spring Function: If the gas spring's performance changes over time, re-adjust the tension as described in the 'Operating' section.

8. දෝශ නිරාකරණය

ඔබේ MOUNTUP මොනිටර හස්තය සමඟ ගැටළු ඇති වුවහොත්, පහත දැක්වෙන පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:

8.1 Arm Does Not Stay at Desired Height

• ගැටලුව: Monitor arm falls down.
• විසඳුම: The gas spring tension is too low for the monitor's weight. Increase tension by turning the adjustment screw counter-clockwise ("+" direction).
• ගැටලුව: Monitor arm rises up.
• විසඳුම: The gas spring tension is too high for the monitor's weight. Decrease tension by turning the adjustment screw clockwise ("-" direction).

Refer to the 'Gas Spring Adjustment' section for detailed instructions and the weight-to-turns table.

8.2 Monitor Tilts Down Unintentionally

• ගැටලුව: The monitor head cannot maintain its tilt angle.
• විසඳුම: The tilting bolt is loose. Loosen the tilting bolt, adjust the monitor to the desired angle, and then retighten the tilting bolt firmly.

9. වගකීම් සහ සහාය

MOUNTUP provides a 3-year support for this product. If you have any questions regarding pre-purchase compatibility, installation, or require assistance with any issues, please do not hesitate to contact MOUNTUP customer service. Our team is available to provide friendly and helpful support.