අත්පොත්+

zidoo V12

Zidoo V12 Bluetooth and Infrared Remote Control

පරිශීලක අත්පොත

හැඳින්වීම

The Zidoo V12 is an advanced Bluetooth and Infrared (IR) remote control designed to provide seamless control over your Zidoo media players. It features a comfortable, skin-friendly design, motion-sensing backlight, and dual-module connectivity for extended range and multi-angle control. The V12 remote is compatible with a wide range of Zidoo models, including Z9S, Z9X, Z10, Z10pro, X20, X20pro, Z1000, Z1000pro, UHD2000, UHD3000, Neo S, and Neo Alpha.

ඉදිරිපස සහ පැත්ත view of the Zidoo V12 remote control.

ඉදිරිපස සහ පැත්ත view of the Zidoo V12 remote control, showcasing its full button layout and ergonomic profile.

Zidoo V12 remote control resting on a wooden table.

The Zidoo V12 remote control resting on a wooden table, highlighting its sleek design and integration into a home environment.

සැලසුම

1. බැටරි ස්ථාපනය

The Zidoo V12 remote control requires three (3) AAA batteries for operation. Batteries are not included with the product.

  1. දුරස්ථ පාලකයේ පිටුපස බැටරි මැදිරි කවරය සොයා ගන්න.
  2. කවරය විවෘත කිරීම සඳහා එය පහළට හෝ ඊතලයකින් දක්වා ඇති දිශාවට ලිස්සා යවන්න.
  3. Insert three AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
  4. බැටරි මැදිරි කවරය ආරක්ෂිතව ක්ලික් කරන තෙක් එය නැවත එම ස්ථානයට ලිස්සා යාමෙන් ප්‍රතිස්ථාපනය කරන්න.

2. මූලික බලය සක්‍රිය කිරීම

Once batteries are installed, the remote is ready for use. Some functions, like Bluetooth pairing, may require specific steps as detailed in the Operating section.

මෙහෙයුම් උපදෙස්

බ්ලූටූත් යුගලනය

To pair the Zidoo V12 remote control with your Zidoo media player via Bluetooth:

  1. Ensure the remote control is within 30 cm (approximately 12 inches) of your Zidoo media player.
  2. එකවර ඔබා අල්ලාගෙන සිටින්න OK යතුර සහ PG දුරස්ථ පාලකයේ යතුර.
  3. Continue holding until the indicator light on the remote control begins blinking. This indicates that the remote is in pairing mode.
  4. The device should now be paired.

IR ඉගෙනුම් කාර්යය

The Zidoo V12 remote can learn infrared (IR) commands from other remote controls, allowing you to consolidate control of multiple devices.

  1. ඔබා අල්ලාගෙන සිටින්න බලය key (usually the green power button) for 3 seconds until the indicator light remains constantly on. This signifies the remote is in learning mode.
  2. Press the specific key on the V12 remote that you wish to program. The indicator light will begin to blink.
  3. Point the infrared emission window of the V12 remote and the original remote control at each other, ensuring they are closely aligned.
  4. Press the corresponding key on the original remote control that you want the V12 to learn.
  5. The indicator light on the V12 remote will stop blinking once the learning process for that key is complete.
  6. Repeat steps 2-5 for any other keys you wish to program.
  7. To exit the learning mode, press the බලය නැවතත් යතුර.

පසුතල පාලනය

The Zidoo V12 features a motion-sensing backlight for improved visibility in dark environments.

  • To manually turn the backlight on or off, press and hold the පසුතල ආලෝකය key (often represented by a light bulb or star icon) for 3 seconds.
Diagram showing learning method, Bluetooth pairing, and backlight instructions.

Detailed instructions for IR learning, Bluetooth pairing, and backlight control as depicted on the product's instructional diagram.

Hand holding Zidoo V12 remote pointing at TV.

A user holding the Zidoo V12 remote control, demonstrating its ease of use with a Zidoo media player interface on a television screen.

Zidoo V12 remote with backlit buttons illuminated.

The Zidoo V12 remote control showcasing its illuminated backlit buttons, designed for convenient use in low-light conditions.

Hand holding Zidoo V12 remote in a living room setting.

A user operating the Zidoo V12 remote control in a living room, illustrating its high sensitivity and effective control from various angles.

Two remote controls side-by-side, demonstrating IR learning.

A visual representation of the Zidoo V12 remote control's simple learning capability, allowing it to acquire commands from other IR remotes.

නඩත්තු කිරීම

පිරිසිදු කිරීම

දුරස්ථ පාලකයේ පෙනුම සහ ක්‍රියාකාරීත්වය පවත්වා ගැනීම සඳහා:

  • මෘදු වියළි රෙද්දකින් මතුපිට පිස දමන්න.
  • මුරණ්ඩු අපිරිසිදුකම සඳහා, තරමක් dampරෙදි කැබැල්ල වතුරෙන් හෝ මෘදු, උල්ෙල්ඛ නොවන පිරිසිදුකාරකයකින් පිස දමන්න. සැර රසායනික ද්‍රව්‍ය හෝ උල්ෙල්ඛ ද්‍රව්‍ය භාවිතා නොකරන්න.
  • Avoid getting liquid into the remote's internal components.

බැටරි ප්රතිස්ථාපනය

Replace batteries when the remote's response becomes sluggish or it stops functioning. Always replace all three AAA batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries.

ගබඩා කිරීම

දුරස්ථ පාලකය දිගු කාලයක් භාවිතා නොකරන්නේ නම්, කාන්දු වීම සහ දුරස්ථ පාලකයට සිදුවිය හැකි හානි වැළැක්වීම සඳහා බැටරි ඉවත් කරන්න.

දෝෂගවේෂණය

ගැටලුවවිය හැකි හේතුවවිසඳුම
දුරස්ථව ප්‍රතිචාර නොදක්වයිDead or low batteries; Incorrect battery installation; Remote out of range; Obstruction between remote and device; Bluetooth not paired (for Bluetooth functions).Replace batteries; Check battery polarity; Move closer to the device; Remove obstructions; Re-pair Bluetooth (see Operating section).
බ්ලූටූත් යුගල කිරීම අසාර්ථකයිRemote too far from device; Interference; Incorrect pairing procedure.Ensure remote is within 30 cm of the device; Minimize interference from other wireless devices; Follow Bluetooth pairing steps precisely (see Operating section).
IR learning not workingIncorrect learning procedure; Remotes not aligned; Weak signal from original remote.Ensure correct IR learning steps are followed; Align IR windows closely; Ensure original remote has fresh batteries.
Backlight not illuminatingBacklight feature is off; Low batteries.Press and hold the Backlight key for 3 seconds to activate; Replace batteries.

පිරිවිතර

විශේෂාංගයවිස්තර
මාදිලියේ නමV12
නිෂ්පාදකයාසිඩූ
නිෂ්පාදන මානයන් (L x W x H)7.95 x 1.77 x 0.79 අඟල් (20.19 x 4.50 x 2.01 cm)
අයිතමයේ බරඅවුන්ස 3.84 (ග්‍රෑම් 108.87)
සම්බන්ධතාවයBluetooth, Infrared (IR)
බලශක්ති ප්රභවය3 x AAA බැටරි (ඇතුළත් කර නැත)
විශේෂ ලක්ෂණBacklit buttons, Motion-sensing, IR learning function
Compatible Zidoo ModelsZ9S, Z9X, Z10, Z10pro, X20, X20pro, Z1000, Z1000pro, UHD2000, UHD3000, Neo S, Neo Alpha

වගකීම් සහ සහාය

For information regarding product warranty, please refer to the documentation provided at the time of purchase or contact the seller directly. Zidoo products typically come with a manufacturer's warranty, details of which can be found on the official Zidoo webවෙබ් අඩවිය හෝ ඔවුන්ගේ පාරිභෝගික සහාය සම්බන්ධ කර ගැනීමෙන්.

For technical support or further assistance, please contact the seller from whom you purchased the Zidoo V12 remote control or visit the official Zidoo support channels.