Turing TP-MFD8M28-1Y Smart Series 8MP Network Dome Camera User Manual

1. හැඳින්වීම

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Turing TP-MFD8M28-1Y Smart Series 8MP Network Dome Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation.

The TP-MFD8M28-1Y is an advanced 8MP dome IP camera designed for robust surveillance applications, featuring Turing Vision Core AI Licensing Plan for enhanced cloud-based functionalities.

2 ආරක්ෂිත තොරතුරු

නිෂ්පාදනයට තුවාල හෝ හානි වැළැක්වීම සඳහා පහත සඳහන් ආරක්ෂක පියවරයන් නිරීක්ෂණය කරන්න:

• Ensure the power source is stable and meets the camera's requirements (PoE).
• කැමරාව අධික උෂ්ණත්වයන්ට, ආර්ද්‍රතාවයට හෝ විඛාදන පරිසරයන්ට නිරාවරණය නොකරන්න.
• Avoid direct exposure of the lens to strong light sources, which may damage the image sensor.
• Handle the camera with care to prevent physical damage, especially to the dome cover.
• දේශීය විදුලි කේතයන්ට අනුකූලව සුදුසුකම් ලත් පුද්ගලයින් විසින් ස්ථාපනය සිදු කළ යුතුය.
• කිසියම් නඩත්තුවක් හෝ පිරිසිදු කිරීමක් සිදු කිරීමට පෙර විදුලිය විසන්ධි කරන්න.

3. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• Turing TP-MFD8M28-1Y Dome Camera
• සවි කරන ඉස්කුරුප්පු සහ බිත්ති ප්ලග්
• ස්ථාපන ආකෘතිය
• Quick Start Guide (This manual serves as the comprehensive guide)
• Waterproof Connector (if applicable)

4. නිෂ්පාදන ලක්ෂණ

The Turing TP-MFD8M28-1Y camera offers a range of advanced features:

• අධි විභේදනය: Max. 8MP (3840x2160) @20 FPS for clear imaging.
• ස්ථාවර කාච: Equipped with a 2.8mm fixed lens.
• අඩු ආලෝක කාර්ය සාධනය: Features TwilightVision superior low light technology and Smart IR up to 30m (98ft).
• කල්පැවැත්ම: IP67 rated for dust and water resistance, and IK10 rated for vandal resistance.
• AI ඒකාබද්ධ කිරීම: Includes 1st Year Turing CORE AI License for cloud event video clip storage and smart searches.
• අනුකූලතාව: NDAA Compliant.
• ගබඩා: Supports up to 256GB microSD card (card not included).

රූපය 4.1: ඉදිරිපස view of the Turing TP-MFD8M28-1Y Smart Series 8MP Network Dome Camera. The camera features a white, circular housing with the "TURING" logo on the side. The lower part consists of a dark, transparent dome protecting the camera lens, which is visible at the bottom center. A small black dot, likely an indicator light or sensor, is present on the top surface of the white housing.

5. පිහිටුවීම සහ ස්ථාපනය

5.1 Mounting Location Selection

අපේක්ෂිත ක්ෂේත්‍රය සපයන සවි කිරීමේ ස්ථානයක් තෝරන්න view and is structurally sound enough to support the camera's weight. Consider factors such as lighting conditions, potential obstructions, and network cable accessibility. The camera is designed for ceiling mount applications.

5.2 භෞතික ස්ථාපනය

1. සවි කරන මතුපිට සකස් කරන්න: Use the provided installation template to mark the drilling holes on the ceiling or wall.
2. සිදුරු සිදුරු: Drill pilot holes according to the marked positions. Insert wall plugs if mounting on drywall or masonry.
3. මාර්ග කේබල්: Pass the Ethernet cable (for PoE) through the cable entry hole in the mounting base.
4. කැමරාව සුරක්ෂිත කරන්න: Align the camera's mounting holes with the drilled holes and secure it using the provided screws. Ensure the camera is firmly attached.
5. ජාල කේබලය සම්බන්ධ කරන්න: Connect the Ethernet cable to the camera's RJ45 port. Ensure a secure connection, especially if using the waterproof connector.
6. සකස් කරන්න View: Loosen the adjustment screws on the camera's gimbal (if applicable) to position the lens for the desired viewකෝණය. සකස් කළ පසු ඉස්කුරුප්පු තද කරන්න.

5.3 ජාල වින්‍යාසය

After physical installation, connect the camera to your network. The camera supports Power over Ethernet (PoE), simplifying installation by providing both power and data through a single Ethernet cable.

• IP ලිපිනය පැවරීම: The camera will typically obtain an IP address automatically via DHCP. Refer to your network's DHCP server or use Turing's discovery tool (if available) to find the camera's IP address.
• කැමරාවට ප්රවේශ වීම: a විවෘත කරන්න web browser and enter the camera's IP address to access its web අතුරු මුහුණත.
• මූලික පිවිසුම: Use the default username and password (refer to the Quick Start Guide or product packaging for defaults). It is highly recommended to change the default password immediately for security.
• ජාල සැකසීම්: Configure network settings such as static IP address (if preferred), subnet mask, gateway, and DNS servers as per your network requirements.

6. මෙහෙයුම

6.1 සජීවී View සහ පටිගත කිරීම

කැමරාවේ සජීවී විකාශයට පිවිසෙන්න view through its web interface or a compatible Network Video Recorder (NVR) / Video Management Software (VMS). Configure recording schedules, motion detection, and other recording parameters as needed.

• විභේදනය සහ රාමු අනුපාතය: Adjust video resolution (up to 8MP) and frame rate (up to 20 FPS) based on your storage and bandwidth capabilities.
• රූප සැකසීම්: Fine-tune brightness, contrast, saturation, and other image parameters for optimal video quality. Utilize WDR (Wide Dynamic Range) for scenes with high contrast.

6.2 Smart Features (Turing CORE AI)

The camera integrates with Turing Vision Core AI, offering advanced surveillance capabilities:

• Cloud Event Video Storage: Benefit from 30-day cloud event video clip storage with the CORE AI License.
• Smart Searches: Utilize intelligent search functionalities in the cloud to quickly find specific events or patterns.
• බුද්ධිමත් ඇඟවීම්: Configure real-time alerts based on detected events.

For detailed configuration of Turing Vision Core AI features, refer to the Turing Vision platform documentation or support resources.

6.3 MicroSD Card Storage

The camera supports local storage via a microSD card up to 256GB. Insert the card into the designated slot (usually accessible by removing the dome cover). Format the card through the camera's web භාවිතයට පෙර අතුරු මුහුණත.

7. නඩත්තු කිරීම

නිතිපතා නඩත්තු කිරීම ඔබේ කැමරාවේ ප්‍රශස්ත ක්‍රියාකාරිත්වය සහ කල්පැවැත්ම සහතික කරයි:

• පිරිසිදු කිරීම: Gently clean the dome cover and lens with a soft, lint-free cloth. For stubborn dirt, use a mild, non-abrasive cleaning solution. Do not use harsh chemicals.
• ස්ථිරාංග යාවත්කාලීන කිරීම්: Periodically check the Turing website for firmware updates. Keeping the firmware updated ensures access to the latest features and security patches.
• කේබල් පරීක්ෂාව: Inspect network cables and connections for any signs of wear or damage, especially in outdoor installations.
• පාරිසරික පරීක්ෂාව: Ensure the camera's operating environment remains within specified temperature and humidity ranges.

8. දෝශ නිරාකරණය

9. පිරිවිතර

10. වගකීම් සහ සහාය

The Turing TP-MFD8M28-1Y camera includes an extended warranty with an active CORE AI License. For specific warranty terms and conditions, please refer to the official Turing webවෙබ් අඩවිය හෝ ඔවුන්ගේ පාරිභෝගික සහාය අමතන්න.

For technical support, product inquiries, or warranty claims, please visit the official Turing support portal or contact their customer service department. Keep your purchase receipt and product serial number handy when seeking support.

Official Turing Webඅඩවිය: www.turing.ai