LOKITHOR J3250 PRO පැනීමේ ආරම්භක පරිශීලක අත්පොත

1. හැඳින්වීම

The LOKITHOR J3250 PRO is a powerful and versatile LiFePO4 jump starter designed to provide reliable starting power for vehicles with up to 9.5L gasoline and 7.5L diesel engines. It also functions as a portable power bank and features an integrated LED flashlight. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device.

2 ආරක්ෂිත තොරතුරු

Please read and understand all safety instructions before operating the LOKITHOR J3250 PRO. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• අක්ෂි ආරක්ෂාව: බැටරි සමඟ වැඩ කරන විට සෑම විටම ආරක්ෂිත කණ්නාඩි පළඳින්න.
• වාතාශ්රය: හොඳින් වාතාශ්රය ඇති ප්රදේශයක උපාංගය භාවිතා කරන්න.
• දරුවන්: උපාංගය දරුවන්ට ළඟාවිය නොහැකි ලෙස තබා ගන්න.
• කෙටි පරිපථ: රතු සහ කළු cl වලට ඉඩ නොදෙන්නamps to touch each other or the same metal object.
• ප්‍රතිලෝම ධ්‍රැවීයතාව: Ensure correct polarity connection (red to positive, black to negative) to avoid damage. The device includes reverse-polarity protection.
• තෙතමනය: Do not immerse the device in water. While it has an IP65 rating for water and dust resistance, it is not designed for submersion.
• හානිය: Do not use the device if it is damaged. Contact customer support for assistance.
• උෂ්ණත්වය: Do not expose the device to extreme heat or fire. Store within recommended temperature ranges.

The LOKITHOR J3250 PRO incorporates 10 safety protection technologies, including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temperature, high-temperature, over-voltage, over-load, over-charge, and over-current protection.

3. නිෂ්පාදන අවසන්view

3.1 පෙට්ටියේ ඇති දේ

• LOKITHOR J3250 PRO Jump Starter Unit
• Jumper Starter Clamps
• USB-A සිට USB-C කේබලය
• USB-C සිට USB-C කේබලය
• 12V ඇඩැප්ටරය
• උපාංග ගබඩා බෑගය
• පරිශීලක අත්පොත

Included components with the LOKITHOR J3250 PRO Jump Starter.

3.2 ප්රධාන ලක්ෂණ

• High Starting Current: 3250ක් ලබා දෙයි Amp peak current for reliable vehicle starting.
• එන්ජින් ගැළපුම: Suitable for gasoline engines up to 9.5 liters and diesel engines up to 7.5 liters.
• LiFePO4 Battery Technology: Offers over 2000 cycles at 100% depth of discharge, providing extended lifespan and enhanced chemical stability compared to traditional lead-acid or lithium-ion batteries.
• උසස් ආරක්ෂාව: Features 10 types of protection, including spark-proof, mistake-proof, and reverse-polarity protection.
• 100W Two-way Fast Charging: Recharges the unit in approximately 60 minutes and can provide power output for USB-C devices.
• ConnectMax Technology: Automatically detects clamp connection impedance to optimize starting efficiency.
• අතේ ගෙන යා හැකි බලශක්ති බැංකුව: Provides 74.24Wh capacity with USB-A and USB-C outputs for charging phones, tablets, laptops, and other devices.
• 400-Lumen LED Flashlight: Includes multiple modes (constant, strobe, SOS) for emergency lighting.
• කල් පවතින නිර්මාණය: IP65 waterproof and dustproof rating, designed to operate in temperatures from -4°F to 140°F (-20°C to 60°C).
• දිගු පොරොත්තු කාලය: Maintains charge for up to 42 months (1260 days) with minimal self-discharge.

The J3250 PRO provides 3250A peak current, suitable for large engines.

The device features an IP65 rating for water and dust resistance.

4. පිහිටුවීම සහ ආරෝපණය කිරීම

4.1 මූලික ආරෝපණය

Before first use, fully charge the LOKITHOR J3250 PRO. This ensures optimal performance and extends battery life.

1. Connect the provided USB-C to USB-C cable to the jump starter's USB-C input port.
2. Connect the other end of the USB-C cable to a 100W Power Delivery (PD) compatible wall charger (not included) or use the included 12V adapter.
3. The display will show charging progress. A full charge typically takes about 60 minutes with a 100W PD charger.

4.2 Recharging the Device

It is recommended to recharge the jump starter after each use. If not used regularly, recharge the unit every 3-6 months to maintain battery health and readiness.

5. මෙහෙයුම් උපදෙස්

5.1 Jump Starting a Vehicle (Normal Mode)

Use Normal Mode for vehicles with a partially discharged battery.

1. Cl අමුණන්නamps: රතු (+) cl සම්බන්ධ කරන්නamp to the positive terminal of the vehicle battery. Connect the black (-) clamp වාහන බැටරියේ සෘණ පර්යන්තය වෙත.
2. බල ගැන්වීම: Turn on the LOKITHOR J3250 PRO. The device will automatically detect the battery and prepare for jump starting.
3. වාහනය ආරම්භ කරන්න: ඔබේ වාහනය ආරම්භ කරන්න.
4. Power Off & Detach: Once the vehicle starts, power off the jump starter and immediately disconnect the clampවාහන බැටරියෙන් s.

Steps for jump starting a vehicle using Normal Mode.

5.2 Jump Starting a Vehicle (Boost Mode)

Use Boost Mode for completely dead batteries where Normal Mode does not initiate a jump start.

1. රතු Cl අමුණන්නamp: රතු (+) cl සම්බන්ධ කරන්නamp වාහනයේ බැටරියේ ධන අග්‍රය වෙත.
2. බූස්ට් සක්‍රිය කරන්න: Long press the 'Boost' button on the jump starter for more than 5 seconds. The display will indicate Boost Mode is active.
3. කළු Cl අමුණන්නamp: කළු (-) cl සම්බන්ධ කරන්නamp වාහන බැටරියේ සෘණ පර්යන්තය වෙත.
4. වාහනය ආරම්භ කරන්න: Start your vehicle within 30 seconds of activating Boost Mode.
5. Power Off & Detach: Once the vehicle starts, power off the jump starter and immediately disconnect the clampවාහන බැටරියෙන් s.

Steps for jump starting a vehicle using Boost Mode for completely dead batteries.

5.3 අතේ ගෙන යා හැකි බලශක්ති බැංකුවක් ලෙස භාවිතා කිරීම

The J3250 PRO can charge various electronic devices.

• Connect your device to the USB-A output port (12V/1.5A, 18W QC) or the USB-C output port (20V/5A, 100W PD).
• උපාංගය ස්වයංක්‍රීයව ආරෝපණය වීමට පටන් ගනී.

The J3250 PRO can charge multiple electronic devices.

5.4 LED ෆ්ලෑෂ් ලයිට් භාවිතා කිරීම

The integrated 400-lumen LED flashlight provides illumination and emergency signaling.

• Press the flashlight button once for constant illumination.
• Press again to cycle through Strobe and SOS modes.
• ෆ්ලෑෂ් ලයිට් එක නිවා දැමීමට සිව්වන වරටත් ඔබන්න.

The 400-lumen LED flashlight offers multiple modes for various situations.

6. නඩත්තු කිරීම

• නිතිපතා නැවත ආරෝපණය කරන්න: To prolong battery life, recharge the unit after each use. If stored, recharge every 3-6 months.
• ගබඩා: Store the jump starter in a cool, dry place, away from direct sunlight and moisture. The device has a standby time of up to 42 months when fully charged.
• පිරිසිදු කිරීම: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Clamp රැකවරණය: cl සහතික කරන්නamps are clean and free of corrosion for optimal connection.

The J3250 PRO maintains charge for up to 42 months in standby.

7. දෝශ නිරාකරණය

If you encounter issues with your LOKITHOR J3250 PRO, refer to the following common troubleshooting steps:

• උපාංගය ක්‍රියාත්මක නොවේ: Ensure the device is charged. If the battery is completely depleted, charge it for at least 15-30 minutes before attempting to power on.
• Vehicle Not Starting (Normal Mode):
  • cl එක පරීක්ෂා කරන්නamps නිවැරදි බැටරි පර්යන්තවලට ආරක්ෂිතව සම්බන්ධ කර ඇත (රතු සිට ධන, කළු සිට සෘණ).
  • වාහන බැටරි පර්යන්ත පිරිසිදු බවත් විඛාදනයෙන් තොර බවත් සහතික කර ගන්න.
  • If the vehicle battery is completely dead, try using Boost Mode.
• Vehicle Not Starting (Boost Mode): Ensure the Boost Mode was activated correctly (long press for 5 seconds) and the vehicle was started within 30 seconds.
• Clamps Sparking: This is normal if the clamps are connected incorrectly or if there is a poor connection. Ensure proper connection and clean terminals. The device has spark-proof protection.
• උපාංගය අධික උනුසුම් වීම: The device has high-temperature protection. If it feels excessively hot, disconnect it and allow it to cool down before further use.
• අයකිරීමේ ගැටළු: Ensure the charging cable and adapter are functioning correctly and are compatible with 100W PD for fast charging.

If problems persist, please contact LOKITHOR customer support.

8. පිරිවිතර

The J3250 PRO is designed to operate in a wide range of temperatures.

9. වගකීම් සහ සහාය

LOKITHOR products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official LOKITHOR webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුවට කෙලින්ම සම්බන්ධ වන්න. වගකීම් හිමිකම් සඳහා මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

If you have any after-sales questions, please feel free to contact us.