Definitive Technology Dymension DM10 Center Channel Speaker User Manual

හැඳින්වීම

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Definitive Technology Dymension DM10 Center Channel Speaker. The DM10 is designed to deliver clear dialogue and dynamic sound, enhancing your home theater experience. Please read this manual thoroughly before installation and use.

රූපය: ඉදිරිපස view of the Definitive Technology Dymension DM10 Center Channel Speaker.

වැදගත් ආරක්ෂක උපදෙස්

• Read all instructions before operating the speaker.
• අනාගත යොමුව සඳහා මෙම උපදෙස් තබා ගන්න.
• Heed all warnings on the speaker and in this manual.
• සියලුම උපදෙස් අනුගමනය කරන්න.
• ජලය අසල මෙම උපකරණය භාවිතා නොකරන්න.
• වියළි රෙද්දකින් පමණක් පිරිසිදු කරන්න.
• කිසිදු වාතාශ්‍රය විවරයක් අවහිර නොකරන්න. නිෂ්පාදකයාගේ උපදෙස් අනුව ස්ථාපනය කරන්න.
• රේඩියේටර්, තාප රෙජිස්ටර්, ලිප, හෝ වෙනත් උපකරණ (ඇතුළුව) වැනි තාප ප්‍රභවයන් අසල ස්ථාපනය නොකරන්න. ampලිෆයර්) තාපය නිපදවන.
• නිෂ්පාදකයා විසින් නිශ්චිතව දක්වා ඇති ඇමුණුම්/උපාංග පමණක් භාවිතා කරන්න.
• සියලුම සේවා සුදුසුකම් ලත් සේවා පුද්ගලයින් වෙත යොමු කරන්න. උපකරණයට කිසියම් ආකාරයකින් හානි වී ඇත්නම් සේවා සැපයීම අවශ්‍ය වේ.

Unpacking Your Speaker

Carefully remove your DM10 speaker from its packaging. Inspect the speaker for any signs of damage during transit. If you notice any damage, do not connect the speaker and contact your dealer immediately. Retain the packaging materials for future transport or storage.

කොටුවේ ඇති දේ:

• Definitive Technology Dymension DM10 Center Channel Speaker
• Literature Pack (User Manual, Warranty Information)

සැකසුම සහ ස්ථානගත කිරීම

Proper placement and connection are crucial for optimal audio performance.

කථානායක ස්ථානගත කිරීම:

The DM10 is a center channel speaker designed to reproduce dialogue and on-screen effects. For the best experience, place the speaker directly above or below your television or projection screen, centered horizontally with the screen. Ensure the front of the speaker is flush with the front edge of your entertainment center or cabinet to avoid sound reflections.

Image: The DM10 speaker positioned centrally below a television, demonstrating ideal placement for home theater.

• උස: Position the speaker as close to ear level as possible when seated.
• නිෂ්කාශනය: Ensure there are no obstructions directly in front of the speaker that could block sound.
• ස්ථාවරත්වය: Place the speaker on a stable, level surface to prevent vibrations.

Connecting Your Speaker:

The DM10 connects to the center channel output of your AV receiver or ampලිෆයර්. හොඳම කාර්ය සාධනය සඳහා උසස් තත්ත්වයේ ස්පීකර් වයර් භාවිතා කරන්න.

1. Turn off your AV receiver/ampලයිෆයර් සහ විදුලිබල ජාලයෙන් එය විසන්ධි කරන්න.
2. Strip approximately 1/2 inch (12mm) of insulation from the ends of your speaker wire. Twist the bare wire strands tightly.
3. Connect the positive (+) red terminal on the DM10 speaker to the positive (+) center channel terminal on your receiver.
4. Connect the negative (-) black terminal on the DM10 speaker to the negative (-) center channel terminal on your receiver.
5. සියලුම සම්බන්ධතා ආරක්ෂිත බවත්, කෙටි පරිපථයක් ඇති කළ හැකි අයාලේ යන වයර් කෙඳි නොමැති බවත් සහතික කර ගන්න.

සටහන: Maintaining correct polarity (positive to positive, negative to negative) is essential for proper sound reproduction.

මෙහෙයුම

Once connected, the DM10 operates in conjunction with your AV receiver or ampජීවිතාරක්ෂකයා.

මූලික බලගැන්වීම:

1. After making all connections, plug your AV receiver/amplifier back into the power outlet.
2. ඔබගේ AV ග්‍රාහකය ක්‍රියාත්මක කරන්න/ampජීවිතාරක්ෂකයා.
3. Select the appropriate input source on your receiver.
4. ශබ්දය අඩු මට්ටමක තබාගෙන ක්‍රමයෙන් එය සුවපහසු සවන්දීමේ මට්ටමකට වැඩි කරන්න.

පද්ධති වින්‍යාසය:

Most AV receivers have an automatic speaker setup and calibration feature (e.g., Audyssey, MCACC, YPAO). It is highly recommended to run this calibration to optimize the DM10's performance within your specific room environment and with your other speakers.

• Refer to your AV receiver's manual for detailed instructions on running its automatic calibration.
• Ensure the DM10 is set as a "Small" speaker in your receiver's settings if you are using a subwoofer, allowing the subwoofer to handle lower frequencies.
• Adjust the crossover frequency as recommended by your receiver's calibration or typically between 80Hz and 120Hz.

Image: An internal diagram highlighting the DM10's full-range three-driver array, including two 5.25" midrange woofers and a 1" tweeter.

Image: An internal diagram illustrating the integrated 9-inch passive radiator, designed for enhanced bass performance.

නඩත්තු කිරීම සහ රැකවරණය

To ensure the longevity and optimal performance of your DM10 speaker, follow these care guidelines:

• පිරිසිදු කිරීම: Dust the speaker cabinet with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or strong detergents, as these can damage the finish.
• ග්රිල්: The acoustically transparent black cloth grille can be gently vacuumed with a soft brush attachment if needed. Do not remove the grille unless necessary, and handle it with care.
• පරිසරය: Avoid placing the speaker in direct sunlight or near heat sources. Keep it away from excessive moisture or humidity.
• හැසිරවීම: When moving the speaker, lift it carefully from the base. Avoid applying pressure to the drivers or grille.

දෝෂගවේෂණය

If you experience issues with your DM10 speaker, consult the following common problems and solutions:

If the problem persists after trying these solutions, please contact Definitive Technology customer support or your authorized dealer.

පිරිවිතර

වගකීම් සහ සහාය

Your Definitive Technology Dymension DM10 Center Channel Speaker comes with a limited warranty. Please refer to the included Literature Pack for specific terms and conditions of your warranty coverage.

For technical support, service inquiries, or to purchase replacement parts, please visit the official Definitive Technology website or contact their customer service department. You can also reach out to your authorized dealer for assistance.

සබැඳි සම්පත්: www.definitivetechnology.com