1. හැඳින්වීම
The JHS The Kilt V2 Overdrive and Fuzz Guitar Effects Pedal, developed in collaboration with guitarist Stu G, is a versatile tone machine designed to cover a wide range of dirt box needs for studio and touring musicians. This manual provides detailed instructions for the setup, operation, and maintenance of your Kilt V2 pedal and the accompanying Red Remote Footswitch.
2. නිෂ්පාදන අවසන්view
2.1 JHS The Kilt V2 Pedal
රූපය: ඉහළ-පහළ view of the JHS The Kilt V2 pedal, showcasing its Volume, Tone, Cut, Flat, Gain, G1, and G2 controls, along with the footswitch and LED indicator.
The Kilt V2 pedal features a robust set of controls to sculpt your desired overdrive and fuzz tones:
- වෙළුම් බොත්තම: Controls the overall output level of the pedal.
- නාද බොත්තම: Adjusts the high-end frequencies, allowing for brighter or darker tones.
- නොබ් ලබා ගන්න: Controls the amount of drive/distortion applied to your signal.
- Cut/Flat Toggle Switch: Modifies the high-end response. In 'Cut' mode, it reduces high frequencies, while 'Flat' provides a full-range response.
- G1 Toggle Switch: Engages an additional gain stage for more riffy grit.
- G2 Toggle Switch: Engages a higher gain stage, providing increased saturation and sustain suitable for lead tones.
2.2 JHS Red Remote Footswitch
Image: The compact JHS Red Remote Footswitch, featuring a single footswitch and a 1/4" jack.
The Red Remote Footswitch is designed to remotely activate the G2 toggle switch on compatible JHS pedals, including the Kilt V2. This allows for on-the-fly switching between different gain settings without needing to reach down to the pedal itself.
3. පිහිටුවීම
3.1 බල අවශ්යතා
The JHS The Kilt V2 pedal requires a standard 9V DC power supply (not included) with a center-negative barrel connector. Ensure your power supply meets these specifications to prevent damage to the unit.
3.2 පැඩලය සම්බන්ධ කිරීම
- ඔබේ ගිටාරය සම්බන්ධ කරන්න ආදානය jack on the right side of the Kilt V2 pedal using a standard 1/4" instrument cable.
- සම්බන්ධ කරන්න ප්රතිදානය jack on the left side of the Kilt V2 pedal to your ampසම්මත 1/4" උපකරණ කේබලයක් භාවිතයෙන් ඔබේ සංඥා දාමයේ ලිෆයර් හෝ ඊළඟ පැඩලය.
- Plug your 9V DC power supply into the power input jack.
3.3 Connecting the Red Remote Footswitch
To use the Red Remote Footswitch with your Kilt V2 pedal:
- Connect the Red Remote Footswitch to the G2 REMOTE jack (indicated by a red washer) on the Kilt V2 pedal using a standard 1/4" instrument cable.
- Once connected, the Red Remote Footswitch will control the G2 toggle, disabling the pedal's onboard G2 toggle switch.
4. මෙහෙයුම් උපදෙස්
4.1 Kilt V2 Pedal Operation
The Kilt V2 offers a range of tonal possibilities:
- මූලික සක්රිය/අක්රිය: Press the main footswitch to engage or bypass the pedal. The LED indicator will illuminate when the pedal is active.
- සැකසුම් ලබා ගන්න:
- Lightest Gain: With both G1 and G2 toggles in the down position, you achieve an amp-like, chimey breakup.
- Riffy Grit: Flip the G1 toggle up to add a touch of drive for more aggressive rhythm tones.
- Lead Tones: Flip the G2 toggle up for increased saturation and sustain, ideal for lead playing.
- Over the Top Fuzz: Engage both G1 and G2 toggles for an almost gated, fat distorted fuzz tone.
- ස්වරය හැඩගැන්වීම: Use the Tone knob to adjust the brightness. The Cut/Flat toggle allows for further high-end refinement, cutting frequencies in 'Cut' mode or providing a full response in 'Flat' mode.
- ශබ්ද ගැලපුම: Adjust the Volume knob to match your desired output level with your bypassed signal or to provide a boost.
Video: Official JHS Pedals demonstration of the Kilt V2 Overdrive and Fuzz Pedal, showcasing its various tonal capabilities and controls.
4.2 Red Remote Footswitch Operation
The Red Remote Footswitch provides convenient remote control over the Kilt V2's G2 gain stage:
- Press the footswitch on the Red Remote to toggle the G2 gain stage on or off. This allows for quick transitions between lower and higher gain settings during live performance or practice.
5. නඩත්තු කිරීම
Proper care will ensure the longevity and optimal performance of your JHS pedals:
- පිරිසිදු කිරීම: පැඩලයේ බාහිර කොටස පිරිසිදු කිරීම සඳහා මෘදු, වියළි රෙද්දක් භාවිතා කරන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා කිරීමෙන් වළකින්න.
- ගබඩා: භාවිතයේ නොමැති විට සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක පෙඩලය ගබඩා කරන්න.
- බල සැපයුම: Always use a compatible 9V DC center-negative power supply. Disconnect power when the pedal is not in use for extended periods.
6. දෝශ නිරාකරණය
If you encounter issues with your JHS pedals, try the following:
- ශබ්දයක් නැත: සියලුම කේබල් සම්බන්ධතා පරීක්ෂා කරන්න (ගිටාරය, පැඩලය, amp, power). Ensure the power supply is correctly connected and functioning. Test with different cables or a different power supply if available.
- අනපේක්ෂිත ශබ්දය/හම්: Ensure all cables are properly shielded. Try a different power outlet or power supply. Check for ground loops if using multiple pedals.
- LED දැල්වෙන්නේ නැත: Verify the power supply connection and functionality. If the pedal is engaged but the LED is off, there might be an internal issue requiring professional service.
7. පිරිවිතර
| විශේෂාංගය | විස්තරය |
|---|---|
| වෙළඳ නාමය | JHS පැඩල් |
| ආකෘතිය | The Kilt V2 Overdrive and Fuzz Pedal |
| ඇතුළත් උපාංග | Red Remote Footswitch |
| ශ්රව්ය ප්රතිදාන ප්රයෝග | Overdrive, Fuzz |
| බලශක්ති ප්රභවය | 9V DC (Power supply not included) |
| Color (Pedal) | අළු |
| Color (Footswitch) | රතු |
8. වගකීම් සහ සහාය
JHS Pedals products are covered by a manufacturer's warranty against defects in materials and workmanship. For detailed warranty information, product registration, or technical support, please visit the official JHS Pedals webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවය අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
