SONICAKE Levitate Digital Delay Reverb 2-in-1 Guitar Effects Pedal

හැඳින්වීම

The SONICAKE Levitate is a versatile dual-effect pedal combining carefully selected digital delay and plate reverb effects. This pedal is designed to enrich your sound with expansive ambient textures. It features independent control over dry and wet signals for the delay, a large schedulable decay time for the reverb, and convenient trail and tap tempo functions for live performance. A special buffer bypass circuit ensures your guitar's tone remains pristine.

ප්රධාන ලක්ෂණ

• Digital Delay/Plate Reverb: Two effects integrated into one compact guitar pedal.
• Extended Delay Time: Offers a maximum of 2000ms delay time.
• Adjustable Reverb Decay: Plate reverb features a large schedulable decay parameter.
• Performance Functions: Includes Trail and Tap Tempo functions for enhanced live show control.
• Buffer Bypass: Specially designed buffer bypass circuit maintains sound clarity.
• Power Requirement: Operates with a 9V center negative regular pedal power supply (not included).

පාලන සහ කාර්යයන්

The Levitate pedal features intuitive controls for both its delay and reverb sections. Each effect can be activated independently or simultaneously.

Delay Section Controls

• තෙත්: Adjusts the level of the delayed (wet) signal.
• වියළි: Adjusts the level of the original (dry) signal.
• ප්‍රතිපෝෂණ: ප්‍රමාද පුනරාවර්තන ගණන පාලනය කරයි.
• වේලාව: Sets the delay time, up to 2000ms.
• DELAY Footswitch: Tap to switch the delay effect on/off. Hold to enter Tap Tempo mode.

Reverb Section Controls

• Reverb: Adjusts the overall level of the reverb effect.
• දිනය: ප්‍රතිවර්ත වලිගයේ දිග පාලනය කරයි.
• ReverB Footswitch: Tap to switch the reverb effect on/off. Hold to toggle the Trail function.

දෘශ්‍ය අවසන්view පාලනයන්

රූපය: ඉහළ-පහළ view of the SONICAKE Levitate pedal with each control knob and footswitch clearly numbered for easy identification.

සැලසුම

1. බල සම්බන්ධතාවය: Connect a standard 9V DC center-negative power adapter (not included) to the DC 9V input jack on the pedal.
2. ආදාන සම්බන්ධතාවය: Connect your guitar or other instrument to the INPUT jack on the right side of the pedal using a standard 1/4-inch instrument cable.
3. ප්රතිදාන සම්බන්ධතාවය: පැඩලයේ වම් පැත්තේ ඇති OUTPUT ජැක් එක ඔබේ එකට සම්බන්ධ කරන්න ampසම්මත අඟල් 1/4 උපකරණ කේබලයක් භාවිතයෙන් ඔබේ සංඥා දාමයේ ලිෆයර් හෝ ඊළඟ පැඩලය.
4. මූලික සැකසුම්: Start with all knobs at the 12 o'clock position for a neutral starting point.

Power Input Diagram

Image: Diagram illustrating the DC 9V center negative power input requirement for the pedal.

මෙහෙයුම් උපදෙස්

Activating Effects

• To activate the Delay effect, tap the right footswitch. The LED will illuminate.
• To activate the Reverb effect, tap the left footswitch. The LED will illuminate.
• Both effects can be used simultaneously.

Tap Tempo Function (Delay)

• Hold down the DELAY footswitch for approximately 2 seconds until the LED starts flashing.
• Tap the DELAY footswitch two or more times at your desired tempo. The pedal will automatically set the delay time to match your taps.
• Hold the DELAY footswitch again to exit Tap Tempo mode.

Trail Function (Reverb)

• Hold down the REVERB footswitch for approximately 2 seconds until the LED flashes. This toggles the Trail function.
• When Trail is ON, the reverb tail will naturally decay even after the effect is disengaged.
• When Trail is OFF, the reverb will cut off immediately when the effect is disengaged.

Demonstration Video: SONICAKE Levitate Guitar Effects Pedal

Demonstration Video: Sonicake LEVITATE - Digital Delay Reverb 2 Effects in 1 Pedal

නඩත්තු කිරීම

• මෘදු, වියළි රෙද්දකින් පිස දැමීමෙන් පැඩලය පිරිසිදුව තබා ගන්න.
• පැඩලය අධික උෂ්ණත්වයන්ට, ආර්ද්‍රතාවයට හෝ සෘජු හිරු එළියට නිරාවරණය වීමෙන් වළකින්න.
• Do not attempt to disassemble or modify the pedal, as this will void the warranty.
• Ensure proper power supply (9V DC center-negative) to prevent damage.

දෝෂගවේෂණය

• ශබ්දයක් නැත: Check all cable connections (input, output, power). Ensure the power supply is correctly connected and functioning. Verify that your instrument and amplifier නිවැරදිව වැඩ කරයි.
• දුර්වල හෝ විකෘති ශබ්දය: Check the battery (if applicable) or power supply. Ensure all cables are in good condition. Adjust the WET/DRY and REVERB/DECAY knobs to appropriate levels.
• බලපෑම ආකර්ශනීය නොවේ: Ensure the footswitch is fully pressed and the corresponding LED illuminates.
• අනවශ්‍ය ශබ්දය: Try using a different power supply or isolating the pedal from other noisy equipment. Ensure all cables are shielded.

පිරිවිතර

පෙට්ටියේ ඇති දේ

• LEVITATE Guitar Pedal

වගකීම් සහ සහාය

For warranty information and customer support, please refer to the official SONICAKE webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔබේ සිල්ලර වෙළෙන්දා අමතන්න. මිලදී ගත් බවට සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.