1. හැඳින්වීම
This manual provides comprehensive instructions for the setup, operation, and maintenance of your iDPRT 320E Thermal Label Printer. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage. The iDPRT 320E is designed for efficient label printing in various environments, supporting multiple operating systems and connectivity options.
2. පෙට්ටියේ ඇති දේ
ඇසුරුම් ඉවත් කිරීමේදී සියලුම සංරචක ඇති බව තහවුරු කර ගන්න:
- iDPRT 320E Thermal Label Printer
- උපදෙස් අත්පොත
- USB දත්ත කේබලය
- බල ඇඩැප්ටරය
- Sample ලේබල්
3. නිෂ්පාදන අවසන්view
The iDPRT 320E Thermal Label Printer is a compact device designed for high-speed, high-resolution label printing. It features a simple design with essential ports for connectivity and an intuitive LED indicator for operational status.
රූපය 3.1: ඉදිරිපස view of the iDPRT 320E Thermal Label Printer with sampලේබල්.
ප්රධාන සංරචක:
- ලේබල් පිටවීමේ කොටස: මුද්රිත ලේබල් මතුවන තැන.
- Cover Release Latches: Used to open the printer cover for label loading.
- විදුලිබල වරාය: බල ඇඩැප්ටරයට සම්බන්ධ වේ.
- USB Port: පරිගණකයකට සෘජු සම්බන්ධතාවයක් සඳහා.
- LAN වරාය: ජාල සම්බන්ධතාවය සඳහා.
- LED දර්ශකය: මුද්රණ යන්ත්රයේ තත්ත්වය පෙන්වයි.
4. සැකසුම් උපදෙස්
4.1 බල සම්බන්ධතාවය
- බල ඇඩැප්ටරය මුද්රණ යන්ත්රයේ බල තොටට සම්බන්ධ කරන්න.
- බල ඇඩැප්ටරය සුදුසු විදුලි අලෙවිසැලකට සම්බන්ධ කරන්න.
4.2 ලේබල් පූරණය කිරීම
The printer supports thermal labels with widths between 1 and 3.15 inches.
- Gently press the cover release latches on both sides of the printer to open the top cover.
- Place the roll of thermal labels into the label compartment, ensuring the labels feed from the bottom of the roll and the printable side faces upwards.
- Adjust the label guides to fit the width of your labels snugly, without creasinඔවුන්ට උ.
- Pull a few labels past the print head and out through the label exit slot.
- ඉහළ කවරය නිසි තැනට වැටෙන තුරු තදින් වසා දමන්න.
Figure 4.1: Correct method for loading thermal labels into the printer.
4.3 ධාවක සහ මෘදුකාංග ස්ථාපනය
To use the printer with your computer, you must install the appropriate drivers and the Label Designer software.
- Visit the official iDPRT website to download the latest drivers for your operating system (Windows, Mac, or Linux).
- Download and install the free Label Designer software from the official website. This software is available for Windows and as an online editor for Mac users.
- Follow the on-screen instructions to complete the installation process for both the drivers and the software.
Figure 4.2: The iDPRT 320E printer supports multiple operating systems.
4.4 සම්බන්ධතා විකල්ප
The iDPRT 320E offers flexible connectivity:
- USB සම්බන්ධතාවය: Connect the printer directly to your computer using the provided USB cable.
- LAN Network Connection: Connect the printer to your local area network using an Ethernet cable for shared access.
- ජංගම යෙදුම: For direct printing from your smartphone, download the iDPRT mobile application.
Figure 4.3: USB and LAN network connectivity options.
5. මෙහෙයුම් උපදෙස්
5.1 Creating Labels with Label Designer Software
The Label Designer software allows you to create and customize various label types.
- Launch the Label Designer software on your computer.
- Select a template or start a new label design.
- Customize your labels with text, barcodes, QR codes, images, and various fonts. The software supports different label sizes and layouts.
- Ensure the label dimensions in the software match the physical labels loaded in the printer.
Figure 5.1: Designing labels using the Label Designer software.
5.2 මුද්රණ ලේබල්
Once your label design is complete and labels are loaded:
- In the Label Designer software, click the 'Print' button.
- Select the iDPRT 320E printer from the list of available printers.
- Adjust print settings such as quantity and print speed if necessary. The printer supports speeds up to 180mm/s and a resolution of 203 DPI.
- Confirm the settings and initiate printing.
Figure 5.2: The printer delivers high-quality 203 DPI resolution for clear labels.
Figure 5.3: The printer is capable of high-speed printing up to 180mm/s.
5.3 LED Indicator Meanings
The LED indicator on the printer provides visual feedback on its status:
- Green (Solid On): The printer is currently printing.
- Red (Solid On): The printer cover is not properly closed, or there is a paper jam/error.
- Blue (Solid On): මුද්රණ යන්ත්රය ක්රියාත්මක වීමට සූදානම්.
6. නඩත්තු කිරීම
6.1 මුද්රණ යන්ත්රය පිරිසිදු කිරීම
නිතිපතා පිරිසිදු කිරීම මුද්රණ ගුණාත්මකභාවය පවත්වා ගැනීමට සහ මුද්රණ යන්ත්රයේ ආයු කාලය දීර්ඝ කිරීමට උපකාරී වේ.
- Ensure the printer is powered off and unplugged before cleaning.
- මෘදු, ලින්ට් රහිත රෙදි භාවිතා කරන්න dampened with isopropyl alcohol to gently wipe the print head. Avoid touching the print head with bare hands.
- Clean the exterior of the printer with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Remove any dust or label debris from the label compartment.
7. දෝශ නිරාකරණය
If you encounter issues with your iDPRT 320E printer, refer to the following common problems and solutions:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| මුද්රණ යන්ත්රය ක්රියාත්මක නොවේ | විදුලි රැහැන විසන්ධි වී ඇත; විදුලිබල පිටවාන දෝෂ සහිතයි. | බල සම්බන්ධතා පරීක්ෂා කරන්න; වෙනත් අලෙවිසැලක් උත්සාහ කරන්න. |
| ලේබල මුද්රණය නොවේ | Labels loaded incorrectly; Printer cover open; No drivers installed; Incorrect printer selected | Reload labels correctly; Close cover firmly; Install drivers; Select iDPRT 320E in print dialog. |
| Poor print quality (faded, blurry) | Print head dirty; Low-quality labels; Incorrect print density settings | Clean the print head; Use recommended thermal labels; Adjust print density in software settings. |
| Cannot connect via USB/LAN | Cable faulty; Driver issue; Network configuration problem | Try a different cable; Reinstall drivers; Verify network settings (for LAN). |
| Cannot connect via mobile app | App not installed; Printer not discoverable; Network issue | Ensure app is installed and updated; Check printer's network connection; Restart printer and app. |
| Mac Bluetooth connectivity issues | Direct Bluetooth printing to Mac is not supported; Driver limitations | Connect via USB or LAN for Mac systems. Mobile app connectivity is available for smartphones. |
8. පිරිවිතර
Detailed technical specifications for the iDPRT 320E Thermal Label Printer:
| විශේෂාංගය | පිරිවිතර |
|---|---|
| මාදිලියේ නම | 320E |
| මුද්රණ තාක්ෂණය | තාප |
| උපරිම මුද්රණ වේගය | 180 mm/s (Monochrome) |
| උපරිම මුද්රණ විභේදනය | 203 DPI |
| උපරිම මාධ්ය ප්රමාණය | 1"-3.15" inches width |
| සම්බන්ධතා තාක්ෂණය | USB, LAN |
| ගැළපෙන උපාංග | PC (Windows, Mac, Linux), Mobile (iOS/Android via App) |
| පාලන ක්රමය | App, Software |
| නිෂ්පාදන මානයන් | 8.11"D x 6.1"W x 5.28"H |
| අයිතමයේ බර | රාත්තල් 3.78 කි |
| විශේෂ ලක්ෂණ | Automatic Label Recognition, LAN Network Connectivity |
9. වගකීම් සහ සහාය
9.1 වගකීම් තොරතුරු
The iDPRT 320E Thermal Label Printer comes with a limited warranty. Please refer to the warranty card included in your product packaging or visit the official iDPRT webසවිස්තරාත්මක නියමයන් සහ කොන්දේසි සඳහා අඩවිය.
9.2 පාරිභෝගික සහාය
For technical assistance, troubleshooting, or any inquiries regarding your iDPRT 320E printer, please contact our customer service team. You can reach us via the Amazon messaging system or through the contact information provided on the official iDPRT website. Our team is available to assist you with any pre-sales or after-sales support needs.
