AXIS F9114 Main Unit User Manual

හැඳින්වීම

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Axis F9114 Main Unit. Please read this manual carefully before using the product to ensure proper functionality and safety.

නිෂ්පාදනය අවසන්view

The AXIS F9114 is a main unit designed for the F-Series surveillance system. It supports up to four F21 or F7 sensor units, providing a flexible and discreet surveillance solution. This unit acts as the central processing hub for connected camera sensors.

රූපය 1: ඉදිරිපස view of the AXIS F9114 Main Unit, showing camera input ports (CAM 1-4), audio input/output, power input, I/O ports, and an Ethernet port with PoE support.

ප්රධාන ලක්ෂණ:

• Supports up to 4 Axis F-Series sensor units (e.g., F21, F7).
• Central processing unit for video and audio streams.
• නම්‍යශීලී ස්ථාපනය සඳහා සංයුක්ත නිර්මාණය.
• Integrated Power over Ethernet (PoE) for simplified power and data connectivity.
• Multiple I/O ports for external device integration.
• Audio input/output capabilities.

සැකසුම සහ ස්ථාපනය

පැකේජයේ අන්තර්ගතය:

• AXIS F9114 Main Unit
• ස්ථාපන මාර්ගෝපදේශය
• (Power supply and sensor units sold separately, unless specified)

Connecting Sensor Units:

1. Ensure the main unit is powered off before connecting any sensor units.
2. Connect the cables from your AXIS F-Series sensor units (e.g., F21, F7) to the designated "CAM 1", "CAM 2", "CAM 3", and "CAM 4" ports on the rear of the F9114 Main Unit. Ensure a secure connection.
3. Each sensor unit requires a dedicated port.

ඒකකය බල ගැන්වීම:

• ඊතර්නෙට් හරහා බලය (PoE): Connect an Ethernet cable from a PoE-enabled switch or injector to the "PoE" port on the F9114. This will provide both power and network connectivity.
• බාහිර බල සැපයුම: If PoE is not used, connect a compatible DC power adapter (not included) to the "PWR" input terminal. Refer to specifications for voltagඊ අවශ්යතා.

ජාල සම්බන්ධතාවය:

Connect an Ethernet cable from your network to the "PoE" port on the F9114. This provides network access for configuration and video streaming.

ශ්‍රව්‍ය සහ I/O සම්බන්ධතා:

• ශ්‍රව්‍ය: Connect external microphones to "IN 1" or "IN 2" and speakers to "OUT" if audio functionality is required.
• I/O: Use the "IO" terminal block for connecting external devices such as alarm sensors or relays. Refer to the detailed wiring diagram in the full technical documentation for specific connections.

මෙහෙයුම

මූලික බලගැන්වීම:

Once all connections are secure and power is supplied, the unit will begin its startup sequence. Observe the LED indicators for status.

LED දර්ශක:

• PWR (බලය): Indicates power status. (e.g., Solid green for normal operation).
• STAT (Status): Indicates operational status. (e.g., Flashing for network activity, solid for ready).
• NET (Network): ජාල සම්බන්ධතාවය සහ ක්‍රියාකාරකම් දක්වයි.

උපාංගය වෙත ප්රවේශ වීම:

1. Use the AXIS IP Utility or a network scanner to discover the IP address of the F9114 on your network.
2. a විවෘත කරන්න web browser and enter the IP address to access the device's web අතුරු මුහුණත.
3. Log in using the default credentials (refer to the installation guide or Axis website for current defaults).
4. Follow the on-screen instructions to configure network settings, video streams, and other system parameters.

වීඩියෝ කළමනාකරණය:

The F9114 integrates with various video management software (VMS) solutions. Refer to your VMS documentation for adding and managing the device.

නඩත්තු කිරීම

• පිරිසිදු කිරීම: Use a soft, dry cloth to clean the exterior of the unit. Do not use harsh chemicals or abrasive cleaners.
• ස්ථිරාංග යාවත්කාලීන කිරීම්: Regularly check the Axis Communications webස්ථිරාංග යාවත්කාලීන කිරීම් සඳහා අඩවිය. ස්ථිරාංග යාවත්කාලීනව තබා ගැනීම ප්‍රශස්ත ක්‍රියාකාරිත්වය, ආරක්ෂාව සහ නව විශේෂාංග වෙත ප්‍රවේශය සහතික කරයි.
• පාරිසරික තත්ත්වයන්: හානිය වළක්වා ගැනීම සඳහා ඒකකය එහි නිශ්චිත උෂ්ණත්ව හා ආර්ද්‍රතා පරාසයන් තුළ ක්‍රියාත්මක වන බවට සහතික වන්න.

දෝෂගවේෂණය

පොදු ගැටළු සහ විසඳුම්:

• බලය නැත:
  • Verify power cable connection (if using external power).
  • Ensure PoE switch/injector is active and providing power (if using PoE).
  • බලශක්ති ප්රභවය පරීක්ෂා කරන්න.
• ජාල සම්බන්ධතාවයක් නැත:
  • Check Ethernet cable connection.
  • Verify network switch/router functionality.
  • Confirm IP address settings are correct or DHCP is functioning.
• No Video from Sensor Unit:
  • Ensure sensor unit cables are securely connected to the F9114.
  • Verify the sensor unit is compatible with the F9114.
  • Check the sensor unit's status indicators (if available).
  • Access the F9114 web interface to confirm sensor unit detection and configuration.
• මුරපදය අමතක වුණා ද:

  Refer to the Axis Communications support documentation for password reset procedures, which typically involve a factory reset button or specific software tools.

For more detailed troubleshooting, refer to the comprehensive support resources available on the Axis Communications webඅඩවිය.

පිරිවිතර

Note: Specifications are subject to change without notice. For the most current information, please refer to the official Axis Communications webඅඩවිය.

වගකීම් සහ සහාය

වගකීම් තොරතුරු:

For detailed warranty information, please refer to the warranty statement provided with your product or visit the official Axis Communications webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

තාක්ෂණික සහාය:

If you encounter issues that cannot be resolved using this manual or the troubleshooting section, please contact Axis Communications technical support. Support resources, including FAQs, documentation, and contact information, are available on their official webඅඩවිය.

Webඅඩවිය: www.axis.com/support