හැඳින්වීම
This manual provides comprehensive instructions for the assembly, installation, and maintenance of your Sanus Fixed Height Speaker Stands, specifically designed for the Sonos Era 100 wireless speaker. Please read all instructions carefully before beginning installation to ensure proper setup and safe operation.
ආරක්ෂිත තොරතුරු
Always follow basic safety precautions when installing and using this product. Keep small parts away from children. Ensure all connections are secure before placing the speaker on the stand. Do not exceed the recommended weight capacity for the speaker stand.
පැකේජයේ අන්තර්ගතය
Verify that all components are present before assembly. If any parts are missing or damaged, contact Sanus customer support.
- Speaker Stand Post (2)
- පාදක තහඩුව (2)
- Speaker Platform (2)
- Mounting Hardware for Sonos Era 100
- රබර් අඩි (8)
- Height-Adjustable Carpet Spikes (8)
- Assembly Tool (e.g., Phillips screwdriver)
සැකසුම සහ ස්ථාපනය
Follow these steps to assemble and install your speaker stands.
- Attach Base Plate to Stand Post: Securely fasten the base plate to the bottom of the stand post using the provided screws and assembly tool. Ensure the connection is tight and stable.
- Install Floor Protection: Depending on your flooring, attach either the rubber feet for hard surfaces or the height-adjustable carpet spikes for carpeted areas to the underside of the base plate. Adjust spikes as needed for leveling.
- Route Speaker Cable: Before attaching the speaker platform, carefully route the Sonos Era 100 power cable and any other necessary cables through the oversized post of the speaker stand. This integrated cable management system helps maintain a clean and organized appearance.
- Attach Speaker Platform: Secure the speaker platform to the top of the stand post using the designated screws.
- Mount Sonos Era 100 Speaker: Place your Sonos Era 100 speaker onto the speaker platform. Use the included hardware to securely attach the speaker to the stand, ensuring it is stable and centered.
මෙහෙයුම් උපදෙස්
These speaker stands are designed to position your Sonos Era 100 speakers at an optimal listening height for an enhanced audio experience.
- ස්ථානගත කිරීම: Position the speaker stands in your desired listening area, ensuring they are on a stable, level surface.
- ප්රශස්ත සවන්දීම: The fixed height of 34.4 inches (87.4 cm) is engineered to provide an ideal acoustic experience for most seating arrangements.
නඩත්තු කිරීම
To ensure the longevity and appearance of your speaker stands, follow these simple maintenance guidelines:
- පිරිසිදු කිරීම: Wipe the stands with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp cloth with mild soap, then dry thoroughly. Avoid abrasive cleaners or solvents.
- පරීක්ෂාව: සියලුම ඉස්කුරුප්පු සහ සම්බන්ධතා තදින් සහ ආරක්ෂිතව පවතින බව සහතික කිරීම සඳහා වරින් වර පරීක්ෂා කරන්න.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ස්ථාවරය සෙලවෙන හෝ අස්ථායී ය. | ලිහිල් සම්බන්ධතා; අසමාන බිම්. | Tighten all screws. If on carpet, adjust height-adjustable spikes until stable. If on hard floor, ensure rubber feet are properly installed and the surface is level. |
| Speaker does not fit securely. | Incorrect speaker model; improper mounting. | Ensure you are using a Sonos Era 100 speaker. Re-check mounting hardware and instructions to ensure correct attachment. |
| Cables are visible or messy. | Cables not routed through the post. | Disassemble the top portion of the stand and re-route cables through the integrated cable management channel in the stand post. |
පිරිවිතර
- ආදර්ශ අංකය: WSSE12-W2
- ගැළපුම: Sonos Era 100 Wireless Speaker
- ද්රව්ය: ඇලෝයි වානේ
- වර්ණය: සුදු
- නිෂ්පාදන මානයන් (L x W x H): 12.7" x 10" x 34.4" (32.2 සෙ.මී. x 25.4 සෙ.මී. x 87.4 සෙ.මී.)
- අයිතමයේ බර: රාත්තල් 17.11 (කිලෝ ග්රෑම් 7.78)
- Optimal Listening Height: අඟල් 34.4 (සෙ.මී. 87.4)
- කේබල් කළමනාකරණය: Integrated through-post design
- බිම් අනුකූලතාව: Includes rubber feet for hard floors and height-adjustable carpet spikes for carpeted surfaces.
වගකීම් තොරතුරු
Sanus provides a වසර 5ක සීමිත වගකීමක් for these speaker stands. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the official Sanus webවෙබ් අඩවිය හෝ පාරිභෝගික සහාය අමතන්න.
සහාය
For further assistance, technical support, or to inquire about replacement parts, please visit the official Sanus website or contact their customer service department. You can find contact information on the Sanus webඅඩවිය: www.sanus.com
