SPYMINNPOO Open Face Helmet Bubble Visor Instruction Manual

හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of your SPYMINNPOO Open Face Helmet Bubble Visor. Designed for compatibility with three-button open-face helmets, this visor offers enhanced protection and a classic aesthetic. Please read this manual thoroughly before use to ensure proper installation and safe operation.

සැකසුම සහ ස්ථාපනය

The SPYMINNPOO Bubble Visor is designed for easy installation on open-face helmets equipped with three snap buttons. No additional tools are required for attachment.

1. Prepare the Visor: Carefully remove any protective films from both sides of the bubble visor.
2. Align the Snaps: Position the visor's three snap buttons over the corresponding snap buttons on your helmet. Ensure the visor is oriented correctly, with the curved edge facing downwards.
3. Secure the Visor: Press firmly on each snap button until it securely attaches to the helmet. You should hear a distinct click for each snap. Verify that all three snaps are firmly engaged to prevent detachment during use.
4. Test the Flip-Up Mechanism: If your visor includes a flip-up bracket, test its operation by gently raising and lowering the visor. Ensure it moves smoothly and locks securely in both the up and down positions.

Image: The transparent bubble visor and its separate three-snap bracket, ready for assembly onto a helmet.

මෙහෙයුම් උපදෙස්

Once installed, the bubble visor provides protection from wind, dust, and debris. The integrated flip-up mechanism allows for easy adjustment.

• වීසර් එක එසවීම: To raise the visor, gently push it upwards from the bottom edge. It will click into an open position, allowing for increased airflow or communication.
• වීසර් පහත් කිරීම: To lower the visor, pull it downwards until it securely clicks into the closed position. This provides full face protection.
• දෘශ්‍යතාව: The transparent PC material ensures clear visibility. Always ensure the visor is clean and free from obstructions before riding.

Image: A person wearing an open-face helmet with the clear bubble visor in the down position, demonstrating clear visibility.

රැකවරණය සහ නඩත්තුව

Proper care will extend the life and maintain the clarity of your bubble visor.

• පිරිසිදු කිරීම: Use a soft, clean cloth and mild soap with lukewarm water to clean the visor. Avoid abrasive cleaners or harsh chemicals, as these can scratch or damage the PC material. Rinse thoroughly and air dry or gently pat dry with a microfiber cloth.
• ගබඩා: When not in use, store the visor in a protective bag or a clean, dry place to prevent scratches and dust accumulation.
• පරීක්ෂාව: Regularly inspect the visor for any signs of damage, such as cracks or deep scratches, which could impair visibility or structural integrity. Replace the visor if significant damage is present.

Image: A transparent bubble visor, highlighting its smooth surface and clarity, which should be maintained through proper cleaning.

දෝෂගවේෂණය

• Visor does not snap securely:
  • Ensure the helmet has standard three-snap buttons.
  • Verify that the snaps on the visor and helmet are clean and free from debris.
  • Apply firm, even pressure directly over each snap button during installation.
  • If snaps remain loose, the helmet's snaps may be worn or incompatible.
• Visor is difficult to flip up or down:
  • Check for any obstructions around the hinge mechanism.
  • Ensure the visor is correctly seated on the helmet snaps.
  • The mechanism may be stiff initially; repeated gentle use can loosen it.
• Distorted vision:
  • Ensure all protective films have been removed from both sides of the visor.
  • Clean the visor thoroughly using the recommended cleaning method.
  • Inspect for scratches or manufacturing defects. If distortion persists and is significant, consider replacing the visor.

නිෂ්පාදන පිරිවිතර

Image: Detailed dimensions of the bubble visor, including lens width, length, and buckle spacing.

වගකීම් සහ සහාය

Specific warranty information for this product is not provided in the available documentation. For support or warranty inquiries, please contact the manufacturer, SPYMINNPOO, directly through their official channels or the retailer where the product was purchased.