TOWODE WiFi Security Alarm System Kit (Model: Home Alarm System) - Instruction Manual
සැකසීම, ක්රියාත්මක කිරීම සහ නඩත්තු කිරීම සඳහා පුළුල් මාර්ගෝපදේශයක්.
1. නිෂ්පාදන අවසන්view
This Wireless Security System kit provides comprehensive protection for your home, office, or shop. It includes a WiFi loud speaker, door/window sensors, and remote controls, all managed via the Tuya App.
Image 1: Complete TOWODE WiFi Security Alarm System Kit components.
2 ප්රධාන ලක්ෂණ
- විස්තීර්ණ ආරක්ෂාව: Includes 6 door/window alarm sensors, 2 remote controls, 1 WiFi loud speaker, and 1 power plug for a complete security solution.
- Intelligent Security Management: Operates on a 2.4 GHz WiFi connection and offers remote control through the Tuya App (Android and iOS) for easy mode changes and device management.
- ක්ෂණික ඇඟවීම්: Sensors trigger a 120 dB loudspeaker alarm and send immediate notifications to your smartphone when doors or windows are opened.
- පුළුල් කළ හැකි පද්ධතිය: Supports up to 20 remote controls and 30 additional sensors (e.g., motion, water leakage) with 433MHz wireless frequency (eV1527 code).
- 2.4 GHz WiFi පමණි: This product is exclusively compatible with 2.4 GHz WiFi networks and does not support 5G networks.
3. පිහිටුවීම සහ ස්ථාපනය
3.1 සංරචක අවසන්view
WiFi Loud Speaker
රූපය 2: විස්තරාත්මක view of the WiFi Loud Speaker components.
දුරස්ථ පාලකය
Image 3: Remote control for arming, disarming, SOS, and ringtone functions.
දොර/කවුළු සංවේදකය
Image 4: Wireless Door Alarm Sensor installation example.
3.2 Sensor Battery Installation
The door/window sensors come with batteries included, but an insulation sheet must be removed before first use. To replace the battery, follow these steps:
- Push the back panel of the sensor downward to remove it.
- Remove the insulation sheet or the old battery and install a new 12V battery (type 23A).
- Push the back panel upward to complete the installation.
Video 1: Demonstrates how to remove the insulation sheet and replace the battery in the D025 Door/Window Sensor (0:24-1:12).
3.3 App Configuration (Tuya Smart / Smart Life)
Before configuring the network, ensure your phone is connected to a 2.4 GHz WiFi network, Bluetooth is enabled, and Location Services are authorized for the Tuya Smart App.
Video 2: Guides through network configuration for the WiFi speaker using the Tuya Smart App (1:03-4:24).
3.4 Pairing Sensors and Remotes
3.4.1 Pairing with Standalone Speaker
- Unplug and plug the power cord of the standalone speaker three times to put it into pairing mode.
- Trigger the door sensor (open/close) within 6 seconds to pair.
- Unplug and replug the power cord to exit pairing mode.
Video 3: Demonstrates pairing a door sensor with a standalone speaker (1:13-1:25).
3.4.2 Pairing with WiFi Speaker via SET button
- Press the SET button on the WiFi speaker to put it into pairing mode.
- Trigger the door sensor (open/close) within 20 seconds to pair.
Video 4: Shows how to pair a door sensor with the WiFi speaker using the SET button (1:54-2:00).
3.4.3 Adding Accessories via App
To add additional sensors or remote controls through the Tuya App:
- Open the Tuya App and navigate to the 'Accessories' section.
- Press the '+' icon to enter pairing mode.
- Trigger the detector (e.g., open a door sensor, activate a motion sensor) or press a button on the remote control. The app will confirm successful addition.
Video 5: Demonstrates adding accessories like motion sensors and remote controls via the Tuya App (5:37-6:32).
3.5 Setting Detector Zone Modes
Each detector can be assigned a specific zone mode to determine how the WiFi Alarm Hub responds when triggered. The table below outlines the different modes:
| Detector Zone Mode | නිරායුධ කරන්න | අතේ දුරින් | මුල් පිටුව |
|---|---|---|---|
| සාමාන්යයි | X | O | O |
| ප්රමාදය | X | O | O |
| නිවසේ දී | X | O | X |
| Home with Delay | X | O | X |
| පැය 24 යි | O | O | O |
| 24 Hours Silent | O | O | O |
| අක්රියයි | X | X | X |
Note: "X" means the WiFi Alarm Hub will not trigger, "O" means the WiFi Alarm Hub will trigger.
Video 6: Instructions on how to set detector zone modes via the Tuya App (6:33-7:54).
4. මෙහෙයුම
- සන්නද්ධ කිරීම: Use the Tuya App or the remote control to set the system to 'Away Arm' (all sensors monitored) or 'Home Arm' (perimeter sensors monitored).
- නිරායුධ කිරීම: Use the Tuya App or the remote control to disarm the system.
- දැනුම්දීම්: Receive real-time alerts on your smartphone when an alarm is triggered.
- Scheduled Arm/Disarm: Configure automatic arming and disarming times through the Tuya App.
5. දෝශ නිරාකරණය
- යෙදුම් සම්බන්ධතාවයක් නැත: Ensure your WiFi network is 2.4 GHz. This system is not compatible with 5G networks. Verify Bluetooth and Location Services are enabled and authorized for the app.
- Sensors Not Pairing: Ensure the insulation sheet is removed from the sensor battery. Follow the pairing instructions carefully, ensuring the speaker is in pairing mode and the sensor is triggered within the specified time.
- ව්යාජ එලාම්: Check sensor placement and ensure they are securely mounted. Avoid installing door contacts on metal doors, as this can interfere with operation.
- දුරස්ථ පාලන ගැටළු: Verify the remote control battery is functional. Ensure the remote is paired correctly with the system.
6. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | TOWODE |
| ආදර්ශ අංකය | Home Alarm System |
| සම්බන්ධතා තාක්ෂණය | Wireless (2.4 GHz WiFi, 433MHz for sensors) |
| ශබ්ද මට්ටම | ඩෙසිබල් 120 යි |
| පාලන ක්රමය | යෙදුම, දුරස්ථ |
| බලශක්ති ප්රභවය | Battery Powered (6 x 12V batteries included for sensors) |
| ද්රව්ය | ABS |
| නිෂ්පාදන මානයන් | 15.3 x 15.3 x 8.5 සෙ.මී |
| අයිතමයේ බර | 690 ග්රෑම් |
| ස්ථාපන ක්රමය | Screw-In/Self-Adhesive/Wall-Mounted |
