Sygonix SY-5231014 Fingerprint/RFID Access System

1. හැඳින්වීම

This manual provides essential information for the installation, operation, and maintenance of your Sygonix SY-5231014 Fingerprint/RFID Access System. This advanced access control unit features a vandal-proof metal housing, an illuminated keypad, and supports multiple access methods including fingerprint, RFID card, and PIN codes. It is designed for recessed installation and offers robust security with an IP55 rating, making it suitable for various indoor and outdoor applications. The system can manage up to 1000 users, including 10 designated visitors.

2. ආරක්ෂිත උපදෙස්

Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

• විදුලි ආරක්ෂාව: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure power is disconnected before any wiring work.
• බල සැපයුම: Use only a compatible 12V/DC or 18V/DC power supply. Incorrect voltage ඒකකයට හානි කළ හැකිය.
• පාරිසරික තත්ත්වයන්: The unit has an IP55 rating, indicating protection against dust ingress and low-pressure water jets. Avoid direct exposure to heavy rain, submersion, or extreme temperatures.
• Vandalism Protection: While designed with a vandal-proof metal casing, extreme force can still cause damage.
• නඩත්තු: ඒකකය ඔබම අලුත්වැඩියා කිරීමට උත්සාහ නොකරන්න. සියලුම සේවා සුදුසුකම් ලත් පුද්ගලයින් වෙත යොමු කරන්න.

3. පැකේජ අන්තර්ගතය

Carefully unpack the box and ensure all items listed below are present and undamaged. If any items are missing or damaged, contact your retailer immediately.

• Sygonix SY-5231014 Access System Unit
• Plastic Mounting Box (for recessed installation)
• සවි කරන ඉස්කුරුප්පු සහ ප්ලග්
• 30 cm Connection Cable for Access Control
• ඩයෝඩය
• Hex Key (Allen wrench)
• පරිශීලක අත්පොත (මෙම ලේඛනය)

4. පිහිටුවීම සහ ස්ථාපනය

The Sygonix SY-5231014 is designed for recessed installation. Proper installation is crucial for optimal performance and security.

4.1 ඒකකය සවි කිරීම

1. විවෘත කිරීම සූදානම් කරන්න: Create an appropriate opening in the wall or mounting surface to accommodate the plastic mounting box. Ensure sufficient depth for the unit and wiring.
2. Install Mounting Box: Secure the plastic mounting box into the prepared opening using the provided screws and plugs. Ensure it is flush with the surface.
3. රැහැන් සම්බන්ධ කරන්න: Refer to the wiring diagram (not provided in this text, refer to the full product manual for detailed diagrams) for connecting the power supply (12V/DC or 18V/DC), electric lock, and Wiegand interface if applicable. The included 30 cm cable facilitates these connections. Ensure all connections are secure and insulated.
4. Insert Diode: If connecting to an inductive load (e.g., an electric strike), install the provided diode across the lock terminals to protect the access controller from back-EMF.
5. Secure Main Unit: Carefully insert the main access control unit into the mounting box. Secure it using the provided screws, typically located on the front panel.

5. මෙහෙයුම් උපදෙස්

The Sygonix SY-5231014 offers various methods for granting access and managing users.

5.1 පරිශීලක කළමනාකරණය

The system supports up to 1000 users, comprising 990 general users and 10 visitor users. User access can be granted via PIN, RFID card, or fingerprint.

• පරිශීලකයින් එකතු කිරීම: Access the programming mode (refer to the full manual for specific programming codes and sequences). Select the option to add a new user. Follow the prompts to register a PIN, scan an RFID card, or enroll a fingerprint.
• පරිශීලකයන් මකා දැමීම: In programming mode, select the option to delete a user. You may need to enter the user's ID or present their access credential to remove them from the system.
• Visitor Users: Visitor users typically have time-limited or single-use access. Configure these settings within the programming mode.

5.2 පද්ධතියට ප්‍රවේශ වීම

• PIN ප්‍රවේශය: Enter your registered PIN code on the illuminated keypad, then press the '#' key.
• RFID කාඩ්පත් ප්‍රවේශය: Present your registered RFID card to the designated reader area on the unit.
• ඇඟිලි සලකුණු ප්‍රවේශය: ඔබගේ ලියාපදිංචි ඇඟිල්ල ඇඟිලි සලකුණු සංවේදකය මත තදින් තබන්න.

Upon successful authentication, the relay will activate according to its configured mode (impulse or toggle), granting access.

5.3 යතුරු පෑඩ් ආලෝකකරණය

The keypad features illumination for improved visibility in low-light conditions. This feature is automatically active or can be configured within the system settings.

5.4 Relay Modes

The programmable relay can operate in either impulse or toggle mode:

• ආවේග මාදිලිය: The relay activates for a short, configurable duration (e.g., 1-99 seconds) after successful authentication, typically used for electric strikes or momentary lock releases.
• ටොගල් මාදිලිය: The relay changes its state (ON to OFF, or OFF to ON) with each successful authentication, suitable for applications requiring a persistent state change, such as holding a door open until another authentication.

6. නඩත්තු කිරීම

Regular maintenance ensures the longevity and reliable operation of your access system.

• පිරිසිදු කිරීම: මෘදු, ඩී භාවිතා කරන්නamp cloth to clean the keypad and fingerprint sensor. Avoid abrasive cleaners, solvents, or excessive moisture. Ensure the fingerprint sensor is free of dirt and smudges for accurate readings.
• පරීක්ෂාව: Periodically check the unit for any signs of physical damage, loose connections, or wear.
• මෘදුකාංග යාවත්කාලීන: නිෂ්පාදකයා පරීක්ෂා කරන්න webකාර්ය සාධනය වැඩි දියුණු කළ හැකි හෝ විශේෂාංග එකතු කළ හැකි ඕනෑම ස්ථිරාංග යාවත්කාලීන සඳහා අඩවිය.

7. දෝශ නිරාකරණය

If you encounter issues with your Sygonix SY-5231014, refer to the following common problems and solutions.

• ඒකකය ක්‍රියාත්මක නොවේ:
  විය හැකි හේතුව: බල සැපයුමක් නැත හෝ වැරදි රැහැන් ඇදීම.
  විසඳුම: Verify the power supply is connected and providing the correct voltage (12V/DC or 18V/DC). Check all wiring connections for continuity and proper polarity.
• Access Denied (PIN/Card/Fingerprint):
  විය හැකි හේතුව: Incorrect PIN, unregistered card/fingerprint, or sensor obstruction.
  විසඳුම: Ensure the correct PIN is entered. Verify the RFID card or fingerprint is registered in the system. Clean the fingerprint sensor thoroughly. Re-enroll fingerprint if issues persist.
• යතුරු පුවරුව ප්‍රතිචාර නොදක්වයි:
  විය හැකි හේතුව: System freeze or internal fault.
  විසඳුම: Disconnect power to the unit for 30 seconds, then reconnect to perform a soft reset. If the issue persists, contact technical support.
• දොර අගුළු නොහැරීම:
  විය හැකි හේතුව: Lock malfunction, incorrect relay settings, or wiring issue.
  විසඳුම: Check the electric lock for proper function. Verify the relay mode (impulse/toggle) and duration settings. Inspect wiring between the access unit and the lock.
• ආලෝකකරණය ක්‍රියා නොකරයි:
  විය හැකි හේතුව: Feature disabled or internal fault.
  විසඳුම: Check system settings to ensure keypad illumination is enabled. If enabled and still not working, contact technical support.

8. පිරිවිතර

9. වගකීම් සහ සහාය

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official Sygonix webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.