FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank User Manual

1. හැඳින්වීම

Thank you for choosing the FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank. This device is designed to provide emergency jump-starting for vehicles and serve as a portable power bank for various electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.

Image 1.1: The FLYLINKTECH BD10 Jump Starter unit with its smart battery clamps.

2 ආරක්ෂිත තොරතුරු

Always observe the following safety precautions to prevent injury or damage to the device or vehicle:

• ශීත කළ බැටරියක් ජම්ප්-ස්ටාර්ට් කිරීමට උත්සාහ නොකරන්න.
• නිසි ධ්‍රැවීයතා සම්බන්ධතාවය සහතික කරන්න (රතු clamp ධනාත්මක කිරීමට, කළු clamp to negative). Reverse polarity can cause damage.
• Do not allow the smart clamps to touch each other when connected to the jump starter.
• උපකරණය දරුවන්ගෙන් ඈත් කරන්න.
• Do not expose the device to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight for extended periods.
• උපාංගය විසුරුවා හැරීම හෝ වෙනස් කිරීම නොකරන්න.
• Use only the provided smart clamps and charging cables.
• If the device becomes excessively hot during use, disconnect it immediately.

Image 2.1: The jump starter incorporates multiple safety features such as spark-proof, reverse polarity, overvoltage, short circuit, overload, and high-temperature protection.

3. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• FLYLINKTECH BD10 Jump Starter Unit
• ස්මාර්ට් බැටරි Clamps
• USB-C සිට USB-C කේබලය
• USB-A සිට USB-C කේබලය
• 12V DC Car Charger Adapter
• පරිශීලක අත්පොත
• ගබඩා නඩුව

Image 3.1: The complete package includes the jump starter, smart clamps, various cables, user manual, and a protective storage case.

4. පිහිටුවීම සහ ආරෝපණය කිරීම

4.1 මූලික ගාස්තුව

Before first use, fully charge the jump starter. The device features a 26800mAh battery capacity.

• Connect the provided USB-C cable to the jump starter's USB-C input port.
• Connect the other end of the cable to a compatible USB wall charger (not included). For fastest charging, use a PD 45W charger.
• The LED screen will display the charging status and battery percentage.

4.2 Charging Times

Note: A 45W wall charger is not included in the package.

Image 4.1: The device supports PD 45W fast charging, significantly reducing recharge time when using a compatible charger.

5. මෙහෙයුම් උපදෙස්

5.1 වාහනයක් ආරම්භ කරමින් පැනීම

The FLYLINKTECH BD10 is capable of jump-starting all gas engines and diesel engines up to 12.0L.

1. Ensure Sufficient Charge: Check the jump starter's LED screen to ensure it has at least 50% charge.
2. ස්මාර්ට් Cl සම්බන්ධ කරන්නamps: ස්මාර්ට් cl එකේ නිල් ප්ලග් එක ඇතුල් කරන්න.amps into the jump starter's 12V output port. Ensure a firm connection.
3. Connect to Car Battery:
   • අමුණන්න රතු (+) clamp වාහනයේ ධන බැටරි පර්යන්තය වෙත.
   • අමුණන්න කළු (-) clamp to the vehicle's negative battery terminal.
4. දර්ශකය පරීක්ෂා කරන්න: ස්මාර්ට් clamp indicator light should turn solid green, indicating a correct connection. If it flashes or shows red, check connections and battery status.
5. Press BOOST (if needed): If the vehicle battery is extremely low or completely dead, press the 'BOOST' button on the jump starter. Wait for the indicator light on the smart clamps to turn solid green.
6. වාහනය ආරම්භ කරන්න: Attempt to start your vehicle. If it doesn't start on the first try, wait 30 seconds before trying again. Do not attempt more than 3 consecutive starts.
7. Cl ඉවත් කරන්නamps: වාහනය පණ ගැන්වූ පසු, වහාම ස්මාර්ට් ක්ලිප් එක ඉවත් කරන්න.amps from the car battery, then disconnect them from the jump starter.

Image 5.1: The jump starter connected to a car battery, ready for operation. It supports 6000A peak current, 12V output, and is suitable for a wide range of engines.

Image 5.2: Visual guide illustrating the four steps to jump-start a vehicle: connect the plug, attach clamps, press boost, and start the engine.

5.2 බලශක්ති බැංකු ක්‍රියාකාරිත්වය

The BD10 can charge multiple electronic devices via its USB-A and USB-C ports.

• USB1 ප්‍රතිදානය: Up to 18W (max)
• USB2 ප්‍රතිදානය: Up to 18W (max)
• USB-C ප්‍රතිදානය: 45W (PD) දක්වා

Connect your device using the appropriate USB cable to the desired output port. The LED screen will show 'OUT' and the wattage being drawn.

Image 5.3: The jump starter functioning as a power bank, simultaneously charging a smartphone and a tablet via its USB ports.

5.3 LED ෆ්ලෑෂ් ලයිට්

The built-in LED flashlight offers three modes: constant light, SOS signal, and strobe light.

• Press and hold the flashlight button to turn on the constant light.
• Press the button again to cycle through SOS and strobe modes.
• අක්‍රිය කිරීමට නැවත ඔබා අල්ලාගෙන සිටින්න.

Image 5.4: The integrated LED flashlight provides illumination, an SOS signal, and a strobe function for emergency situations.

5.4 Informative LED Screen

The 6.0-inch LED screen provides real-time information about the device's status:

• බැටරි මට්ටම: ඉතිරි බැටරි ප්‍රතිශතය පෙන්වයිtage.
• IN/OUT Indicator: Shows whether the device is charging (IN) or discharging (OUT).
• වට්tagඊ සංදර්ශකය: Indicates the power (W) being drawn or supplied.
• දෝෂ අනතුරු ඇඟවීම්: Displays specific error codes or symbols if an issue occurs.

Image 5.5: The 6.0-inch LED screen provides clear information on battery percentage, input/output status, and power consumption.

6. නඩත්තු කිරීම

• නිතිපතා නැවත ආරෝපණය කරන්න: To prolong battery life, recharge the jump starter every 3-6 months, even if not in use.
• ගබඩා: Store the device in its protective case in a cool, dry place, away from direct sunlight and moisture.
• පිරිසිදු කිරීම: මෘදු වියළි රෙද්දකින් උපාංගය පිස දමන්න. රළු රසායනික ද්‍රව්‍ය හෝ උල්ෙල්ඛ ද්‍රව්‍ය භාවිතා නොකරන්න.
• Clamp රැකවරණය: ස්මාර්ට් cl සහතික කරන්නamps are clean and free of corrosion before and after each use.

7. දෝශ නිරාකරණය

The device features multiple alarm situations indicated by audible signals and screen displays:

• අඩු වෙළුමtagඊ ආරක්ෂාව: Audible signal "3". Recharge the device.
• බාහිර වෙළුමtage Exceeds Vehicle Voltage: Audible signal "4". Check vehicle battery voltage.
• කෙටි පරිපථ ආරක්ෂණය: Audible signal "5". Check clamp connections for short circuits.
• Safety Mode Activated: Audible signal "6". Device has entered safety mode due to an issue.
• අධි ධාරා ආරක්ෂණය: Audible signal "7". Reduce load or check connections.
• ඉහළ/අඩු උෂ්ණත්ව එලාමය: Audible signal "8". Allow device to return to operating temperature range (-20°C to 60°C).
• Reverse Connection: Audible signal "9". Correct the clamp ධ්‍රැවීයතාව.

රූපය 7.1: ඉවරයිview of the device's multi-alarm system, indicating various protection states with unique audible signals.

මෙම පියවර අනුගමනය කිරීමෙන් පසුවද ගැටළු පවතින්නේ නම්, කරුණාකර පාරිභෝගික සහාය අමතන්න.

8. පිරිවිතර

Image 8.1: The device is designed to operate reliably in extreme climates, from -20°C (-4°F) to 60°C (140°F).

9. වගකීම් සහ සහාය

FLYLINKTECH is committed to providing high-quality products. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official FLYLINKTECH webවෙබ් අඩවිය. වගකීම් අරමුණු සඳහා කරුණාකර ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.