Roca VICTORIA PLUS A5A2J18C00 Thermostatic Bath-Shower Column

1. හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of your Roca VICTORIA PLUS A5A2J18C00 Thermostatic Bath-Shower Column. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Figure 1: Roca VICTORIA PLUS A5A2J18C00 Thermostatic Bath-Shower Column

2 ආරක්ෂිත තොරතුරු

• ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම ජල සැපයුම් මාර්ග අක්‍රිය කර ඇති බවට වග බලා ගන්න.
• ස්ථාපන ක්‍රියාවලියේ කිසියම් කොටසක් පිළිබඳව ඔබට සැකයක් ඇත්නම්, සුදුසුකම් ලත් ජලනල කාර්මිකයෙකුගෙන් විමසන්න.
• Do not use abrasive cleaners or harsh chemicals on the product, as this may damage the finish.
• Regularly check for leaks and address them promptly to prevent water damage.
• The thermostatic mixer is designed to maintain a constant water temperature. Do not tamper with the factory settings unless necessary and with caution.

3. පැකේජ අන්තර්ගතය

ස්ථාපනය කිරීමට පෙර සියලුම සංරචක පවතින බවත් හානි වී නොමැති බවත් තහවුරු කර ගන්න:

• තාප ස්ථායී මික්සර්
• Adjustable height shower column (1295 mm to 1670 mm)
• Overhead shower head (ø 245 mm)
• Hand shower (ø 100 mm, 3 functions)
• 1.7 m metallic flexible hose
• Shower column mounting kit

4. පිරිවිතර

Figure 2: Technical drawing with key dimensions for installation.

5. ස්ථාපනය

Professional installation is recommended. Ensure you have all necessary tools and safety equipment before proceeding.

5.1. ස්ථාපන ප්‍රදේශය සකස් කිරීම

1. ඔබේ නාන කාමරයට යන ප්‍රධාන ජල සැපයුම වසා දමන්න.
2. Remove any existing shower fixtures.
3. Clean the wall surface where the shower column will be mounted.

5.2. Mount the Thermostatic Mixer

1. Install the eccentric connectors into the wall water outlets. Ensure they are securely tightened and properly aligned.
2. Attach the decorative escutcheons over the eccentric connectors.
3. Connect the thermostatic mixer to the eccentric connectors. Ensure the hot water inlet (marked red) and cold water inlet (marked blue) are correctly aligned. Tighten the nuts using a wrench, protecting the finish with a cloth.

5.3. Install the Shower Column

1. Attach the lower part of the shower column to the top outlet of the thermostatic mixer.
2. Assemble the adjustable height mechanism onto the main column.
3. Mark the position for the upper wall bracket on the wall, ensuring the column is vertical and at the desired height.
4. Drill holes at the marked positions, insert wall plugs, and secure the upper wall bracket.
5. Secure the shower column to the upper wall bracket using the provided screws and Allen key.

5.4. Attach Shower Components

1. Screw the overhead shower head onto the shower arm. Ensure a watertight seal.
2. Connect the metallic flexible hose to the hand shower and the outlet on the thermostatic mixer.
3. Place the hand shower into its adjustable holder on the column.

6. මෙහෙයුම

6.1. Thermostatic Mixer

• උෂ්ණත්ව පාලනය: The right handle controls the water temperature. Push the safety button and turn to adjust above 38°C.
• ප්රවාහ පාලනය: The left handle controls the water flow and diverts water between the overhead shower, hand shower, and bath filler (if applicable).

6.2. Hand Shower Functions

The hand shower features 3 spray functions. Rotate the shower head face to switch between spray patterns.

6.3. Adjustable Height and Angle

• The hand shower holder can be adjusted up or down the column and tilted to your preferred angle.
• The overhead shower head can be tilted and swiveled to adjust the spray direction.

7. නඩත්තු කිරීම

7.1 පිරිසිදු කිරීම

• Clean the chrome surfaces regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for bathroom fixtures.
• Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can damage the finish.
• For shower heads, periodically rub the silicone nozzles to dislodge any limescale buildup.

7.2 දෙහි පරිමාණය ඉවත් කිරීම

In hard water areas, limescale can build up. Use a descaling solution suitable for bathroom fixtures, following the manufacturer's instructions. Rinse thoroughly after cleaning.

8. දෝශ නිරාකරණය

9. වගකීම් සහ සහාය

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Roca webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.