හැඳින්වීම
Thank you for choosing the Perlegear PGTVS29 Single Monitor Stand. This freestanding monitor mount is designed to enhance your workspace by providing versatile positioning for your 13-34 inch screens. With features like 360-degree rotation, 5 ergonomic height settings, and adjustable swivel and tilt, this stand offers optimal viewing flexibility and improved posture. Please read this manual carefully before installation and use to ensure safe and correct operation.
වැදගත් ආරක්ෂක තොරතුරු
Please read all instructions carefully before assembly. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer. Check for any missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose not explicitly specified in this manual.
- බර ධාරිතාව: උපරිම බර ධාරිතාව රාත්තල් 44 (කිලෝග්රෑම් 20) නොඉක්මවන්න.
- තිර ප්රමාණය: Compatible with screens from 13 to 34 inches.
- VESA අනුකූලතාව: Supports VESA mounting patterns 50x50mm and 100x100mm. Verify your screen's VESA pattern before installation.
- ස්ථාවරත්වය: ඇලවීම වැළැක්වීම සඳහා ස්ථාවරය ස්ථාවර, සමතලා මතුපිටක් මත තබා ඇති බවට වග බලා ගන්න.
- දරුවන්: Keep children away from the assembly area. Small parts may be swallowed.
පැකේජයේ අන්තර්ගතය
Please check that all components are included and undamaged. If any parts are missing or damaged, contact Perlegear customer support.
- Support Pillar (1)
- Tempered Glass Base (1)
- VESA Plate (1)
- සවි කිරීමේ දෘඩාංග කට්ටලය (ඉස්කුරුප්පු, රෙදි සෝදන යන්ත්ර, ස්පේසර්)
- කේබල් ක්ලිප් (2)
- එකලස් කිරීමේ මෙවලම් (ඇලන් යතුර, ඉස්කුරුප්පු නියන)
- උපදෙස් අත්පොත (1)
සැකසුම සහ ස්ථාපනය
Follow these steps to assemble your Perlegear PGTVS29 Monitor Stand.
Step 1: Attaching the VESA Plate to Your Monitor
Determine the correct screws and spacers for your monitor's VESA mounting holes. For flat-back screens, use appropriate screws directly. For curved screens or screens with a bump, use spacers to ensure a secure fit. Attach the VESA plate to the back of your monitor.
Step 2: Connecting the Support Pillar to the Base
Attach the foot pads to the matte side of the tempered glass base. Secure the support pillar to the tempered glass base using the provided screws, steel washers, and plastic washers. Ensure plastic washers contact the glass to prevent damage.
පියවර 3: ආධාරක ස්ථම්භයට මොනිටරය ඇමිණීම
Carefully lift your monitor (with the VESA plate attached) and slide it onto the support pillar. Secure the monitor to the support pillar using the knob on the VESA plate. Ensure it clicks into place securely.
එකලස් කිරීමේ වීඩියෝ මාර්ගෝපදේශය
වීඩියෝ: Official Perlegear video demonstrating the assembly process and key features of the monitor stand, including attaching the VESA plate, connecting the pillar to the base, and mounting the screen.
මෙහෙයුම් උපදෙස්
The Perlegear PGTVS29 Monitor Stand offers multiple adjustment options to customize your viewඅත්දැකීමෙන්.
උස ගැලපීම
The monitor stand features 5 height settings, allowing you to adjust your screen from 9.27 inches to 15.26 inches tall. To adjust the height, loosen the knob on the support pillar, slide the monitor to your desired height, and then re-tighten the knob to secure it.
ඇල ගැලපීම
Adjust the screen tilt from -15° to +10° using the convenient tilt knob located on the VESA plate. Loosen the knob, adjust the screen to your preferred angle, and then tighten the knob to lock it in place.
පිහිනුම් ගැලපුම
The screen can be swiveled manually +/-50° for ultimate viewing flexibility. Only swivel the screen by the screen edges; do not press on the screen itself.
360 ° භ්රමණය
Rotate your screen a full 360° to switch between landscape and portrait orientations. This feature is compatible even with large 34-inch displays, though off-centered VESA patterns may affect perfect vertical orientation.
කේබල් කළමනාකරණය
Utilize the two included cable clips to route cables neatly along the back of the support pillar. This helps maintain a clean and organized workspace.
නඩත්තු කිරීම
To ensure the longevity and optimal performance of your Perlegear PGTVS29 Monitor Stand, follow these simple maintenance guidelines:
- පිරිසිදු කිරීම: මෘදු, d රෙදි කඩකින් ස්ටෑන්ඩ් එක පිස දමන්න.amp රෙදි. නිමාවට හානි කළ හැකි උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා කිරීමෙන් වළකින්න.
- ගාංචු: සියලුම ඉස්කුරුප්පු සහ සම්බන්ධතා තදින් සහ ආරක්ෂිතව පවතින බව සහතික කර ගැනීම සඳහා වරින් වර පරීක්ෂා කරන්න. අවශ්ය නම් නැවත තද කරන්න.
- චලනය: If any moving parts become stiff, apply a small amount of silicone-based lubricant to the joints.
දෝෂගවේෂණය
ඔබේ මොනිටර ස්ථාවරය සමඟ ඔබට කිසියම් ගැටළුවක් ඇති වුවහොත්, පහත පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:
- Monitor is wobbly:
- Ensure all screws securing the monitor to the VESA plate and the pillar to the base are tightened.
- Verify the stand is on a flat, stable surface.
- Monitor does not tilt/swivel/rotate smoothly:
- Check if the tilt knob is sufficiently loosened before attempting to adjust.
- Apply a small amount of silicone lubricant to the moving joints if resistance persists.
- Monitor cannot be mounted:
- Confirm your monitor's VESA pattern matches the stand's compatibility (50x50mm or 100x100mm).
- Ensure your monitor's weight (max 44 lbs) and size (max 34 inches) are within the specified limits.
- Use the correct screws and spacers from the mounting hardware kit for your specific monitor.
If you are unable to resolve an issue, please contact our U.S.-based product support team for assistance.
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | පර්ලෙජියර් |
| ආදර්ශ අංකය | PGTVS29 |
| අයිතමයේ බර | රාත්තල් 4.95 (කිලෝ ග්රෑම් 2.25) |
| පැකේජ මානයන් | අඟල් 17.65 x 9.02 x 2.8 |
| වර්ණය | කළු |
| ද්රව්ය | Metal and Tempered Glass Base |
| සවිකිරීමේ වර්ගය | tabletop Mount |
| චලන වර්ගය | කැරකෙනවා |
| ගැළපෙන තිර ප්රමාණය | අඟල් 13-34 |
| උපරිම බර පැටවීමේ ධාරිතාව | රාත්තල් 44 (කිලෝග්රෑම් 20) |
| VESA අනුකූලතාව | 50x50mm, 100x100mm |
| උස සැකසුම් | 5 settings (9.27" to 15.26") |
| ඇල ගැලපීම | -15 ° සිට +10 ° දක්වා |
| පිහිනුම් ගැලපුම | +/-50° |
| භ්රමණය | 360° |
වගකීම් සහ සහාය
Perlegear stands behind the quality of its products. For specific warranty information, please refer to the product packaging or contact Perlegear customer service. If you have any questions, require technical assistance, or need to report missing/damaged parts, please contact our U.S.-based product support team. Contact details can typically be found on the product packaging or the official Perlegear webඅඩවිය.
