AEG Jumpstarter JS15 Instruction Manual

හැඳින්වීම

The AEG Jumpstarter JS15 is a versatile portable power station designed to provide emergency jump-starting for vehicles, act as a power bank for mobile devices, and offer illumination with its integrated LED lamp. This manual provides essential information for the safe and effective use of your device.

It is capable of delivering 400 A starting current and a peak current of 1500 A for 3 seconds, suitable for gasoline engines up to 4.0 L and diesel engines up to 2.0 L. The internal Li-ion battery has a capacity of 44.4 Wh (3 x 4000 mAh) and supports up to 1,000 charge cycles.

ආරක්ෂිත උපදෙස්

මෙම නිෂ්පාදනය භාවිතා කිරීමට පෙර සියලුම ආරක්ෂක අනතුරු ඇඟවීම් සහ උපදෙස් කියවන්න. අනතුරු ඇඟවීම් සහ උපදෙස් අනුගමනය කිරීමට අපොහොසත් වීමෙන් විදුලි කම්පනය, ගින්න සහ/හෝ බරපතල තුවාල සිදුවිය හැක.

• Do not expose the jump starter to rain or wet conditions. Water entering the device will increase the risk of electric shock.
• Do not use the jump starter if it is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• බැටරිය cl කෙටි පරිපථයකට යොමු නොකරන්න.amps. Ensure positive (+) and negative (-) clamps do not touch each other or the same metal object.
• Always connect the red (+) clamp to the positive (+) terminal of the vehicle battery and the black (-) clamp to a metal part of the vehicle chassis away from the battery.
• Wear eye protection and protective clothing when working with vehicle batteries.
• දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
• ශීත කළ බැටරියක් ආරම්භ කිරීමට උත්සාහ නොකරන්න.
• Ensure the vehicle is in park (P) or neutral (N) and the parking brake is engaged before attempting to jump start.
• Disconnect the jump starter from the vehicle battery within 30 seconds after the vehicle starts.

පැකේජයේ අන්තර්ගතය

ඔබගේ පැකේජයේ සියලුම අයිතම ඇති බව තහවුරු කරගන්න:

• AEG Jumpstarter JS15 unit
• Jump starter cables with clamps
• USB ආරෝපණ කේබලය
• ගබඩා බෑගය
• පරිශීලක අත්පොත (මෙම ලේඛනය)

Image: The AEG Jumpstarter JS15 alongside its included storage bag, emphasizing portability and protection.

නිෂ්පාදනය අවසන්view

Familiarize yourself with the components of the AEG Jumpstarter JS15.

Image: AEG Jumpstarter JS15 front view, highlighting 12V vehicle voltage, 400A starting current, and 1500A peak power (3s.

රූපය: සමීප රූපය view of the AEG Jumpstarter JS15, showing its compact form factor and integrated LED light.

Image: Detail of the AEG Jumpstarter JS15's battery connection ports, protected by a cover.

පැනීමේ ආරම්භකය අයකිරීම

Before first use, fully charge the AEG Jumpstarter JS15. It takes approximately 6 to 9 hours to fully charge from empty when charging via USB with 2A.

1. Connect the provided USB charging cable to the jump starter's input port.
2. Connect the other end of the USB cable to a suitable USB power source (e.g., car charger, wall adapter, computer USB port).
3. The display will indicate the charging status. Ensure the device is fully charged before storing or using for jump-starting.

Image: AEG Jumpstarter JS15 being charged via USB, car, or wall socket, also featuring a 70 lumen LED light and including a storage bag.

Setup: Connecting to Vehicle for Jump Start

Follow these steps to safely connect the jump starter to a vehicle battery:

1. පැනීමේ ආරම්භකය සම්පූර්ණයෙන්ම ආරෝපණය කර ඇති බව සහතික කර ගන්න.
2. Turn off the vehicle's ignition and all accessories (lights, radio, etc.).
3. සම්බන්ධ කරන්න රතු (+) ක්ලිamp වෙත ධනාත්මක (+) terminal of the vehicle's battery.
4. සම්බන්ධ කරන්න කළු (-) ක්ලිamp to a solid, unpainted metal part of the vehicle's chassis, away from the battery and fuel lines. Do not connect it directly to the negative terminal of the battery unless specified by the vehicle manufacturer.
5. cl දෙකම සහතික කරන්නamps have a secure connection.

Image: AEG Jumpstarter JS15 showing direct battery connection clamps, suitable for gasoline engines up to 4.0L and diesel engines up to 2.0L.

Operating: Jump Starting a Vehicle

Once the jump starter is correctly connected to the vehicle battery:

1. Turn on the AEG Jumpstarter JS15. The display will show the battery status.
2. Attempt to start the vehicle's engine. If the vehicle does not start immediately, wait at least 30 seconds before trying again. Do not crank the engine for more than 3 seconds per attempt.
3. වාහනය පණ ගැන්වූ පසු, වහාම විසන්ධි කරන්න කළු (-) ක්ලිamp from the vehicle chassis, then disconnect the රතු (+) ක්ලිamp from the vehicle battery.
4. Allow the vehicle's engine to run for a few minutes to recharge its battery.

The AEG Jumpstarter JS15 is compatible with 12V vehicle systems.

Image: AEG Jumpstarter JS15 used in various vehicle types including cars, vans, motorcycles, quads, boats, and scooters.

Using as a Power Bank (USB & Wireless Charging)

The AEG Jumpstarter JS15 can also charge your mobile devices.

USB ආරෝපණය:

1. Connect your device's USB charging cable to the USB output port on the jump starter.
2. පැනීමේ ආරම්භකය ඔබගේ උපාංගය ස්වයංක්‍රීයව ආරෝපණය කිරීම ආරම්භ කරයි.

රැහැන් රහිත ආරෝපණය:

1. Place your Qi-compatible smartphone or other device on the wireless charging pad located on the top surface of the jump starter.
2. Ensure the device is centered on the pad for optimal charging. The jump starter provides up to 10W wireless charging.

Image: AEG Jumpstarter JS15 functioning as a power bank, charging a smartphone and camera, highlighting 44.4 Wh battery capacity, USB and wireless charging up to 10W, and Li-ion battery with up to 1,000 charge cycles.

LED L භාවිතා කිරීමamp

ඒකාබද්ධ LED lamp provides 70 lumens of illumination for various situations.

• LED සක්රිය කිරීමට lamp, press the dedicated light button (refer to product overview ස්ථානය සඳහා).
• Press the button again to cycle through different light modes (e.g., steady on, strobe, SOS, if available) or to turn it off.

Image: The bright 70 lumen LED lamp of the AEG Jumpstarter JS15 illuminated.

නඩත්තු කිරීම

Proper maintenance ensures the longevity and performance of your jump starter.

• අයකිරීම: Recharge the jump starter every 3-6 months, even if not used, to maintain battery health. Store it with at least 50% charge.
• පිරිසිදු කිරීම: වියළි මෘදු රෙද්දකින් ඒකකය පිස දමන්න. රළු රසායනික ද්‍රව්‍ය හෝ උල්ෙල්ඛ පිරිසිදු කරන්නන් භාවිතා නොකරන්න.
• ගබඩා: Store the jump starter in its protective bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• බැටරි ආයු කාලය: The high-quality lithium-ion battery is designed for up to 1,000 charge cycles.

දෝෂගවේෂණය

පිරිවිතර

Image: AEG Jumpstarter JS15 dimensions (190 x 85 x 28.5 mm) and weight (523g), demonstrating its compact and portable design.

වගකීම් සහ සහාය

වගකීම් තොරතුරු සහ පාරිභෝගික සහාය සඳහා, කරුණාකර නිල AEG වෙත යොමු වන්න. webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔබේ සිල්ලර වෙළෙන්දා අමතන්න. මිලදී ගත් බවට සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

නිෂ්පාදකයා: AEG

ආදර්ශ අංකය: 10736

ASIN: B0CC9N2FQQ