KOORUI KR20Y Single Monitor Desk Mount User Manual

හැඳින්වීම

Thank you for choosing the KOORUI KR20Y Single Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Designed for 17-32 inch flat and curved screens, this mount offers VESA 75x75mm and 100x100mm compatibility and supports monitors weighing between 2-9 kg (4.4-19.8 lbs). Please read this manual thoroughly before assembly and retain it for future reference.

ආරක්ෂිත තොරතුරු

තුවාල හෝ හානි වළක්වා ගැනීම සඳහා කරුණාකර පහත ආරක්ෂක පියවරයන් නිරීක්ෂණය කරන්න:

• උපරිම බර ධාරිතාව 9 kg (රාත්තල් 19.8) නොඉක්මවන්න.
• Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and your monitor.
• Follow all assembly instructions carefully. If you have any doubts, consult a qualified professional.
• ස්ථාපනය අතරතුර ළමුන් සහ සුරතල් සතුන් ඈත් කර තබන්න.
• Check all connections and fasteners regularly to ensure they remain secure.
• Avoid pinching cables during adjustment to prevent damage.

පැකේජයේ අන්තර්ගතය

ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව කරුණාකර තහවුරු කරගන්න:

• මොනිටර් බාහු එකලස් කිරීම
• සී-ක්ලබ්amp දෘඪාංග සවිකිරීම
• Grommet Mounting Hardware
• වීසා තහඩුව
• Monitor Mounting Screws (various sizes)
• හෙක්ස් යතුරු / ගැලපුම් මෙවලම්
• කේබල් කළමනාකරණ ක්ලිප්
• පරිශීලක අත්පොත (මෙම ලේඛනය)

Image: All components of the KOORUI KR20Y Monitor Arm, including the arm, C-clamp, and grommet mount options.

පිරිවිතර

Image: Visual representation of the monitor arm's universal compatibility, showing supported screen sizes (17-32 inch), load capacity (2-9kg), and VESA standards (75x75mm, 100x100mm).

සැකසුම සහ ස්ථාපනය

The KOORUI KR20Y monitor arm offers two installation options: C-Clamp Mount and Grommet Mount. Choose the method best suited for your desk.

Image: Diagram illustrating the two available installation methods: C-Clamp කන්ද සහ ග්‍රෝමට් කන්ද.

1. සී-ක්ලෝරයිඩ්amp කන්ද

This method is suitable for desks with a thickness between 20-80mm (0.78-3.14 inches).

1. C-cl එක අමුණන්නamp ඔබේ මේසයේ කෙළවර දක්වා පාදම.
2. cl එක තද කරන්නamp පාදම ආරක්ෂිතව මේසයට සවි කරන තුරු ඉස්කුරුප්පු කරන්න. එය ස්ථාවර බවත් සෙලවෙන්නේ නැති බවත් සහතික කර ගන්න.
3. Insert the main pole of the monitor arm into the C-clamp පදනම.
4. Secure the pole with the provided screw or knob.

2. Grommet Mount

This method requires a pre-drilled hole in your desk with a diameter of 10-50mm (0.39-1.96 inches) and is suitable for desks with a thickness between 20-90mm (0.78-3.54 inches).

1. Disassemble the C-clamp components from the base if they are pre-attached.
2. Insert the grommet bolt through the pre-drilled hole in your desk.
3. Secure the grommet base from underneath the desk using the provided washer and nut. Tighten firmly.
4. Insert the main pole of the monitor arm into the grommet base.
5. Secure the pole with the provided screw or knob.

3. මොනිටරය සවි කිරීම

1. Attach the VESA plate to the back of your monitor using the appropriate screws. Ensure the screws are not overtightened.
2. Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
3. Secure the monitor to the arm using the locking mechanism (if present) or by tightening the designated screws.

4. කේබල් කළමනාකරණය

Route your monitor cables through the integrated cable management channels on the arm to maintain a tidy workspace.

Image: The monitor arm with cables neatly routed through its integrated cable management system, contributing to a clean desk setup.

මෙහෙයුම් උපදෙස්

The KOORUI KR20Y monitor arm features a gas spring system for smooth and effortless adjustments. Adjustments can be made to achieve an ergonomic viewඅත්දැකීමෙන්.

Image: Detailed diagram showing the full range of motion of the monitor arm, including tilt, swivel, rotation, and maximum extension/height.

1. උස ගැලපීම

Gently push or pull the monitor up or down to adjust its height. The gas spring will hold the monitor in your desired position. If the arm is too stiff or too loose, adjust the gas spring tension (see නඩත්තු කිරීම කොටස).

2. ඇලවීම

Grasp the top and bottom edges of your monitor and tilt it forward or backward to achieve an optimal viewing angle. The tilt range is +85° to -30°.

3. භ්‍රමණ ගැලපීම

Rotate the monitor left or right at the VESA plate connection point. The swivel range is ±90°.

4. Rotation (Portrait/Landscape)

Rotate the monitor 360° to switch between landscape and portrait orientations as needed.

රූපය: එක්ස් කිරණක් view highlighting the premium gas spring mechanism within the monitor arm, indicating its durability and smooth adjustment capabilities.

නඩත්තු කිරීම

• Gas Spring Tension Adjustment: If the monitor arm does not hold its position or is difficult to move, use the provided hex key to adjust the gas spring tension. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the arm moves smoothly and holds the monitor securely.
• පිරිසිදු කිරීම: මෘදු, d තුණ්ඩයකින් මොනිටර අත පිස දමන්න.amp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක වලින් වළකින්න.
• වරින් වර පරීක්ෂා කිරීම: සියලුම ඉස්කුරුප්පු සහ සම්බන්ධතා තදින් සහ ආරක්ෂිත බව සහතික කිරීම සඳහා නිතිපතා පරීක්ෂා කරන්න.

දෝෂගවේෂණය

වගකීම් සහ සහාය

For warranty information or technical support, please refer to the warranty card included with your product or visit the official KOORUI website. If you encounter any issues not covered in this manual, please contact KOORUI customer service for assistance.