Insignia Power Manager 12-Outlet Surge Protector

හැඳින්වීම

This manual provides essential information for the safe and effective use of your Insignia Power Manager 12-Outlet Surge Protector (Model: 25C25B). This device is designed to safeguard your electronic equipment from power surges, spikes, and other electrical disturbances, while also providing additional power outlets for your convenience.

Key features include a 4350-joule rating for robust protection, 12 surge-protected outlets (including 4 AC adapter-spaced and 4 always-on outlets), an 8-foot power cord with a right-angle plug for flexible placement, 58dB maximum noise filtering, an energy-saving on/off switch, and LED indicators for surge and ground status.

Image: The Insignia Power Manager 12-Outlet Surge Protector, showcasing its design and multiple outlets.

ආරක්ෂිත තොරතුරු

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected devices.

• ගෘහස්ථ භාවිතය පමණි: This surge protector is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
• විදුලි ශ්‍රේණිගත කිරීම: Do not exceed the electrical rating of the surge protector. Refer to the specifications section for details.
• භූගත කිරීම: Ensure the wall outlet is properly grounded. The surge protector must be plugged into a three-prong grounded outlet.
• Daisy Chaining වළකින්න: Do not plug one surge protector into another.
• වාතාශ්රය: කිසිදු වාතාශ්රය විවෘත කිරීම් අවහිර නොකරන්න.
• ළමුන් සහ සුරතල් සතුන්: ළමයින්ට සහ සුරතල් සතුන්ට ළඟාවිය නොහැකි ලෙස තබා ගන්න.
• පරීක්ෂාව: Regularly inspect the surge protector and its cord for any signs of damage. Discontinue use if damaged.

සැලසුම

1. ඇසුරුම්: Carefully remove the surge protector from its packaging. Retain packaging for future storage or transport.
2. ස්ථානගත කිරීම: Place the surge protector on a stable, flat surface, away from sources of water or excessive heat. The 8-foot power cord with a right-angle plug allows for flexible placement, even in tight spaces or behind furniture.
3. Wall Outlet වෙත සම්බන්ධ වන්න: Plug the surge protector's power cord directly into a standard, grounded 120V AC wall outlet. Do not plug it into an extension cord or another surge protector.
4. දර්ශක සත්‍යාපනය කරන්න: Once plugged in, check the LED indicators on the surge protector. The 'Protected' and 'Grounded' indicators should illuminate, confirming that the unit is functioning correctly and the wall outlet is properly grounded.
5. උපාංග සම්බන්ධ කරන්න: Plug your electronic devices into the available outlets on the surge protector. Utilize the AC adapter-spaced outlets for larger power adapters to prevent blocking adjacent outlets.

Image: (No specific image URL provided for setup, but a visual showing the right-angle plug connected to a wall outlet would be beneficial here.)

ක්‍රියාත්මක වෙනවා

• බල ගැන්වීමේ උපාංග: Once your devices are plugged into the surge protector and the unit is connected to a wall outlet, they will receive power.
• Energy Savings On/Off Switch: Use the master On/Off switch to control power to all connected devices simultaneously. This switch allows for simple power conservation by cutting power to all devices when not in use, preventing standby power drain.
• LED දර්ශක:
  • ආරක්ෂිත LED: When illuminated, this indicates that the surge protection circuitry is active and protecting your devices. If this light goes out, the surge protection has been compromised, and the unit should be replaced.
  • Grounded LED: When illuminated, this indicates that the wall outlet is properly grounded. If this light is not on, the wall outlet may not be grounded, and you should consult a qualified electrician.
• Always-On Outlets: Four of the 12 outlets are designated as 'always-on' outlets. These outlets remain powered regardless of the state of the energy savings on/off switch, suitable for devices that require continuous power.

Image: (No specific image URL provided for LED indicators, but a close-up of the LED lights and the On/Off switch would be helpful here.)

නඩත්තු කිරීම

• පිරිසිදු කිරීම: පිරිසිදු කිරීමට පෙර බිත්ති පිටවානෙන් සහ සම්බන්ධිත සියලුම උපාංගවලින් සර්ජ් ප්‍රොටෙක්ටරය විසන්ධි කරන්න. බාහිර කොටස පිස දැමීමට මෘදු, වියළි රෙද්දක් භාවිතා කරන්න. දියර පිරිසිදු කරන්නන් හෝ එයරොසෝල් භාවිතා නොකරන්න.
• සර්ජ් ආරක්ෂණ අසාර්ථකත්වය: If the 'Protected' LED indicator turns off, it means the surge protection components have absorbed a significant surge and are no longer providing protection. The unit will still function as a power strip, but your devices will no longer be protected from surges. In this event, the surge protector should be replaced to ensure continued protection.
• නිතිපතා පරීක්ෂා කිරීම: Periodically check the power cord and the surge protector housing for any signs of damage, such as fraying, cuts, or cracks. If damage is found, discontinue use immediately and replace the unit.

දෝෂගවේෂණය

පිරිවිතර

• ආදර්ශ අංකය: 25C25B
• වෙළඳ නාමය: ඉංජිනියාව
• මුළු විදුලි බලාගාර: 12 (including 4 AC adapter-spaced and 4 always-on)
• Surge ආරක්ෂණ ශ්‍රේණිගත කිරීම: ජූල් 4350
• Noise Filtering: උපරිම 58dB
• විදුලි රැහැන් දිග: 8 feet (with right-angle plug)
• අයිතමයේ බර: අවුන්ස 12.7 කි
• පැකේජ මානයන්: අඟල් 13.78 x 7.32 x 2.13
• විශේෂ ලක්ෂණය: Energy savings on/off switch, LED indicators (Surge, Grounded)

වගකීම් සහ සහාය

For warranty information, technical support, or customer service regarding your Insignia Power Manager 12-Outlet Surge Protector, please refer to the official INSIGNIA webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සහාය කෙලින්ම අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

You can typically find contact information and detailed warranty terms on the manufacturer's official support pages. Please have your model number (25C25B) available when contacting support.