Danfoss 25T65 077B0033 සම්මත ශීතකරණ තාප පාලක උපදෙස් අත්පොත

1. හැඳින්වීම

This manual provides essential information for the proper installation, operation, and maintenance of your Danfoss 25T65 077B0033 Standard Refrigerator Thermostat. Please read these instructions carefully before proceeding with installation or use to ensure safe and efficient performance. This thermostat is designed for use in refrigerators to regulate internal temperature.

2 ආරක්ෂිත තොරතුරු

අවවාදයයි: Electrical work should only be performed by qualified personnel. Disconnect power to the appliance before installing or servicing the thermostat to prevent electric shock.

• Always disconnect the refrigerator from the main power supply before attempting any installation, maintenance, or repair.
• Ensure that all wiring connections are secure and comply with local electrical codes.
• Do not operate the refrigerator if the thermostat or any other electrical component is damaged.
• Keep children away from the appliance during installation and maintenance.

3. නිෂ්පාදන අවසන්view

The Danfoss 25T65 077B0033 is a standard refrigerator thermostat designed to control the cooling cycle of your appliance. It features a capillary tube for temperature sensing and electrical terminals for connection to the refrigerator's compressor and power supply. The thermostat is crucial for maintaining the desired temperature range within the refrigerator compartment.

රූපය 1: ඉහළ-පහළ view of the Danfoss 25T65 077B0033 Refrigerator Thermostat, showing the main body and coiled capillary tube.

රූපය 2: සමීප රූපය view of the thermostat body, showing model number BN 077B0033 0662 and temperature settings.

4. පිහිටුවීම සහ ස්ථාපනය

Installation of this thermostat typically involves replacing an existing unit. Due to the electrical and refrigeration system components involved, professional installation by a qualified technician is highly recommended.

4.1. පූර්ව ස්ථාපන පියවර

1. බලය විසන්ධි කරන්න: ශීතකරණය බිත්ති පිටවානෙන් විසන්ධි කරන්න හෝ උපකරණයට විදුලිය සපයන පරිපථ කඩනය ක්‍රියා විරහිත කරන්න.
2. ප්‍රවේශ තාප පාලකය: Locate and access the existing thermostat within your refrigerator. This may require removing control panels or other components.
3. ලේඛන රැහැන් ඇදීම: Carefully note or photograph the wiring connections of the old thermostat before disconnecting them. This will aid in correct re-connection.

4.2. ස්ථාපන ක්රියා පටිපාටිය

1. පැරණි උෂ්ණත්ව පාලකය ඉවත් කරන්න: Disconnect the wires and carefully remove the old thermostat and its capillary tube.
2. නව තාප ස්ථාය ස්ථාපනය කරන්න: Mount the new Danfoss 25T65 077B0033 thermostat in the same location as the old one.
3. රැහැන් සම්බන්ධ කරන්න: Connect the electrical wires to the new thermostat's terminals according to your documented wiring scheme. Ensure connections are secure.

රූපය 3: සමීප රූපය view of the electrical terminals on the thermostat, showing connection points for wiring.

4. Position Capillary Tube: Carefully route and position the capillary tube in the same manner as the original. The placement of the capillary tube is critical for accurate temperature sensing. Do not bend or kink the tube sharply.
5. නැවත එකලස් කරන්න: Reassemble any panels or components that were removed to access the thermostat.
6. බලය ප්‍රතිස්ථාපනය කරන්න: ශීතකරණය නැවත බිත්ති අලෙවිසැලට සම්බන්ධ කරන්න හෝ පරිපථ කඩනය ක්‍රියාත්මක කරන්න.

5. මෙහෙයුම් උපදෙස්

The Danfoss 25T65 077B0033 thermostat operates automatically to maintain the set temperature within your refrigerator. Once installed, the thermostat senses the internal temperature via its capillary tube and cycles the compressor on and off as needed.

5.1 උෂ්ණත්ව ගැලපීම

Temperature adjustment is typically done via a control knob connected to the thermostat shaft. Rotate the knob to select the desired cooling level. Higher numbers or colder settings will result in the compressor running more frequently, leading to lower internal temperatures.

රූපය 4: පැත්ත view of the thermostat, showing the shaft where a control knob would be attached for temperature adjustment.

5.2. මූලික මෙහෙයුම

After installation and power restoration, allow the refrigerator several hours to reach the set temperature. Avoid opening the refrigerator door frequently during this initial period.

6. නඩත්තු කිරීම

The Danfoss 25T65 077B0033 thermostat is a sealed unit and requires no routine maintenance. However, ensuring the refrigerator's overall cleanliness and proper functioning of other components can contribute to the thermostat's longevity.

• Regularly clean the refrigerator interior and exterior.
• Ensure the refrigerator door seals are intact and functioning correctly to prevent warm air from entering.
• Keep the condenser coils clean to allow for efficient heat dissipation, which can impact the thermostat's performance.

7. දෝශ නිරාකරණය

If your refrigerator is not maintaining the correct temperature, the thermostat may be a contributing factor. Before assuming the thermostat is faulty, check other common issues.

7.1. පොදු ගැටළු සහ විසඳුම්

• ශීතකරණය සිසිල් නොවේ:
  • ශීතකරණය පේනුගත කර විදුලිය ලබා ගන්නේ දැයි පරීක්ෂා කරන්න.
  • Ensure the temperature control knob is set to a cold enough setting.
  • කන්ඩෙන්සර් දඟර පිරිසිදු බවත් අවහිර වී නොමැති බවත් තහවුරු කර ගන්න.
  • Check if the door seals are intact and the door is closing properly.
  • If these checks do not resolve the issue, the thermostat or compressor may require professional inspection.
• Refrigerator Too Cold (Freezing Food):
  • Adjust the temperature control knob to a warmer setting.
  • Ensure the capillary tube is correctly positioned and not dislodged.
  • If the issue persists, the thermostat may be faulty and require replacement.
• Compressor Runs Constantly:
  • කාන්දුවීම් සඳහා දොර මුද්‍රා පරීක්ෂා කරන්න.
  • Ensure the refrigerator is not overloaded with warm food.
  • Verify that the condenser coils are clean.
  • A constantly running compressor can indicate a faulty thermostat that is not cycling off, or a problem with the refrigeration system itself.

For complex issues or if you are unsure about any troubleshooting steps, contact a qualified appliance repair technician.

8. පිරිවිතර

9. වගකීම් සහ සහාය

For specific warranty information regarding your Danfoss 25T65 077B0033 thermostat, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty terms can vary based on region and seller.

If you require technical support or have questions not covered in this manual, please contact Danfoss customer service or a certified appliance technician. When contacting support, have your product model number (077B0033) and purchase details readily available.