හැඳින්වීම
This manual provides detailed instructions for the proper use, setup, operation, and maintenance of your FOXWELL NT630 Plus OBD2 Scanner. This device is designed to assist in diagnosing issues within your vehicle's Anti-lock Braking System (ABS), Supplemental Restraint System (SRS), and On-Board Diagnostics II (OBD2) systems. Please read this manual thoroughly before operating the device.
නිෂ්පාදන විශේෂාංග
- ABS Auto Bleed Function: Assists in bleeding air from the ABS braking system to restore proper brake pedal function.
- Comprehensive Diagnostic Capabilities: Diagnoses ABS, SRS, and OBD2 systems. Includes reading and clearing trouble codes, viewing live data streams, and turning off indicator lights.
- Multiple Reset Functions: Features ABS Bleed, SRS Reset, SAS Calibration, Oil Light Reset, and Electronic Parking Brake (EPB) Reset.
- ද්වි-දිශානුගත පාලනය: Allows active testing for ABS and SRS systems, including motor tests, actuator tests, and auto bleed tests.
- ස්වයංක්රීය VIN ස්කෑන්: Automatically identifies vehicle information for quicker diagnostics. Manual VIN entry is also supported.
- OBD II 16-Pin Extension Cable: A 1-meter (39-inch) male-to-female diagnostic extension cable for convenient connection to the vehicle's OBDII port.
සැලසුම
- OBDII වරාය සොයා ගන්න: The OBDII port is typically located under the dashboard on the driver's side of the vehicle.
- ස්කෑනරය සම්බන්ධ කරන්න:
Plug the male end of the 16-pin extension cable into the vehicle's OBDII port. Then, connect the female end of the extension cable to the FOXWELL NT630 Plus scanner.
Image: The 16-pin OBD2 extension cable, showing both male and female connectors for connecting the scanner to the vehicle's diagnostic port.
රූපය: සමීප ඡායාරූපයක් view of the male OBD2 connector, which plugs into the vehicle's diagnostic port.
රූපය: සමීප ඡායාරූපයක් view of the female OBD2 connector, where the diagnostic tool is connected.
- බල ගැන්වීම: The scanner will power on automatically once connected to the vehicle's OBDII port.
- ආරම්භක වින්යාසය: Follow the on-screen prompts to select language, time zone, and other initial settings.
මෙහෙයුම් උපදෙස්
General Diagnostics (ABS, SRS, OBD2)
- Select Diagnostic Mode: From the main menu, select the desired diagnostic mode (e.g., "ABS", "SRS", or "OBDII").
- වාහන හඳුනාගැනීම: The scanner will attempt to automatically identify the vehicle's VIN. If unsuccessful, you may need to enter it manually.
- කේත කියවන්න: Select "Read Codes" to retrieve Diagnostic Trouble Codes (DTCs) from the selected system.
Image: A visual representation of the scanner's interface, highlighting options such as "Read Codes", "Clear Codes", "Freeze Frame", "Live Data", and "Auto VIN" for comprehensive diagnostics.
- කේත හිස් කරන්න: After addressing the underlying issue, select "Clear Codes" to erase the DTCs and turn off associated warning lights.
- View සජීවී දත්ත: Select "Live Data" to view real-time sensor data, which can help in diagnosing intermittent issues.
- රාමු දත්ත කැටි කරන්න: Access "Freeze Frame" data to see a snapshot of sensor readings at the moment a DTC was set.
ABS Auto Bleed Function
The ABS Auto Bleed function helps remove air from the brake system, which can cause a soft or sinking brake pedal. This function is vehicle-specific; consult your vehicle's service manual for compatibility and specific procedures.
- සකස් කිරීම: Ensure the vehicle is on a level surface, the ignition is on, and the brake fluid reservoir is at the correct level.
- Access Function: From the ABS menu, select "ABS Auto Bleed" or a similar option.
- තිරයේ ඇති විමසීම් අනුගමනය කරන්න: The scanner will guide you through the bleeding process, which typically involves opening and closing bleed screws on the calipers in a specific sequence while the scanner activates the ABS pump.
Image: An illustration detailing the ABS auto bleed process, showing the internal components of a car's braking system and steps for bleeding after replacing the ABS pump or brake oil.
Reset Functions (SAS, Oil, EPB, SRS)
The NT630 Plus offers several reset functions to maintain vehicle systems after repairs or component replacements.
- SAS ක්රමාංකනය: Calibrates the Steering Angle Sensor after replacement or alignment.
Image: An illustration demonstrating SAS (Steering Angle Sensor) calibration, along with icons for Oil/Service Light Reset and EPB (Electronic Parking Brake) Reset functions.
- Oil Light Reset: තෙල් මාරු කිරීමකින් පසු තෙල් සේවා ආලෝකය නැවත සකසයි.
- EPB යළි පිහිටුවීම: තිරිංග පෑඩ් ප්රතිස්ථාපනය කිරීමෙන් පසු ඉලෙක්ට්රොනික වාහන නැවැත්වීමේ තිරිංග පද්ධතිය නැවත සකසයි.
- SRS යළි පිහිටුවීම: Reads and clears airbag system fault codes. Note: This function cannot clear airbag crash data.
ද්වි-දිශානුගත පාලනය (ක්රියාකාරී පරීක්ෂණය)
Bi-directional control allows the scanner to send commands to vehicle components to test their functionality. This is useful for verifying repairs or diagnosing specific component failures.
- ලබා ගත හැකි පරීක්ෂණ: Includes ABS motor test, actuator tests, and auto bleed tests for ABS and SRS systems.
- ක්රියා පටිපාටිය: Select "Bi-directional Control" from the main menu, then choose the specific test. Follow on-screen instructions carefully.
Image: The FOXWELL NT630 Plus scanner showing its main menu with options for bidirectional control, including "ABS Manual Control Test", "Auto Bleed Test", "ABS Motor Test", and "Actuator Test".
නඩත්තු කිරීම
- මෘදුකාංග යාවත්කාලීන: Regularly check for software updates on the FOXWELL official website to ensure compatibility with the latest vehicle models and diagnostic protocols.
- පිරිසිදු කිරීම: Clean the scanner's screen and casinමෘදු, d සහිත gamp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා කිරීමෙන් වළකින්න.
- ගබඩා: උපාංගය වියළි සිසිල් පරිසරයක, සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව ගබඩා කරන්න.
- කේබල් රැකවරණය: Inspect the OBDII extension cable for any signs of wear or damage before each use. Replace if necessary.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ස්කෑනරය ක්රියාත්මක නොවේ. | Loose connection to OBDII port; vehicle ignition off; vehicle battery low. | Ensure secure connection; turn ignition on; check vehicle battery. |
| Communication error with vehicle. | Incorrect protocol selected; faulty OBDII port; damaged cable. | Verify vehicle compatibility; try another vehicle if possible; inspect cable for damage. |
| කේත හිස් කළ නොහැක. | Underlying fault still present; ignition not on. | Repair the fault first; ensure ignition is on (engine off). |
| ABS Auto Bleed not working. | Vehicle not supported; incorrect procedure followed. | Check vehicle compatibility list; review vehicle service manual for specific steps. |
පිරිවිතර
- වෙළඳ නාමය: ෆොක්ස්වෙල්
- ආකෘතිය: NT630 Plus
- PC Operating System (for updates): Windows XP (or later compatible versions)
- සම්බන්ධතාවය: OBDII 16-Pin
- කාර්යයන්: ABS, SRS, OBD2 Diagnostics, ABS Auto Bleed, SAS, Oil, EPB, SRS Resets, Bi-directional Control.
වගකීම් සහ සහාය
For warranty information and technical support, please refer to the official FOXWELL webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සේවය කෙලින්ම අමතන්න. මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.
සබැඳි සම්පත්: www.foxwelltech.com
