හැඳින්වීම
This manual provides essential information for the safe and proper installation, operation, and maintenance of your Veepeak 30 Amp Flanged Outlet NEMA L14-30R Locking Receptacle. Please read all instructions carefully before installation and use. Retain this manual for future reference.
ආරක්ෂිත තොරතුරු
අවවාදයයි: Electrical shock hazard. Improper installation or use can result in serious injury or death. Always follow local electrical codes and consult a qualified electrician if you are unsure about any part of the installation process.
- Always disconnect power at the circuit breaker or fuse box before installing or servicing this device.
- Ensure all wiring connections are secure and correct according to the wiring diagram and local codes.
- උපාංගයේ නිශ්චිත විදුලි ශ්රේණිගත කිරීම් ඉක්මවා නොයන්න.
- This product is designed for use with NEMA L14-30P compatible plugs only.
- Keep the weatherproof cap closed when the outlet is not in use to protect against moisture and dust.
පැකේජයේ අන්තර්ගතය
- 1 x Veepeak 30 Amp NEMA L14-30R Flanged Outlet
- ස්ථාපන ඉස්කුරුප්පු
පිරිවිතර
| පිරිවිතර | වටිනාකම |
|---|---|
| Ampකෝපය | 30 Amps |
| වෙළුමtage | 125/250 වෝල්ට් ඒසී |
| NEMA වින්යාසය | L14-30R |
| Poles / Wires | 3 Pole, 4 Wire Grounding |
| උපරිම බර | වොට් 7500 |
| නිර්දේශිත වයර් මාපකය | 10 AWG/4C |
| ද්රව්ය | පොලිවිවයිල් ක්ලෝරයිඩ් (PVC) |
| සහතික | ETL Listed (Conforms to UL & CSA standards) |
| අවශ්ය සිදුරු ප්රමාණය | අඟල් 2.5 |
සැකසුම සහ ස්ථාපනය
අවශ්ය මෙවලම්: Screwdriver, wire strippers, drill (for mounting hole), appropriate drill bit.
- සවිකරන ස්ථානය සූදානම් කරන්න: Choose a suitable, dry location for installation. Drill a 2.5-inch diameter hole for the receptacle body. Ensure there is enough space behind the mounting surface for wiring connections.
- රැහැන් සම්බන්ධතා:
Refer to the wiring diagram below and the color-coded terminals on the back of the receptacle. Strip approximately 1/2 inch of insulation from each wire. Insert the wires into the corresponding terminals and tighten the screws securely. Ensure no bare wire strands are exposed outside the terminals.
රූපය: පසුපස view of the L14-30R outlet, displaying the four color-coded terminals for wiring connections (Green for Ground, White for Neutral, Red and Black for Hot).
Image: NEMA L14-30R configuration diagram. 'X' and 'Y' are hot lines (125V each to neutral, 250V between them), 'W' is neutral, and 'G' is ground.
- Green (G): බිම් කම්බි.
- සුදු (W): උදාසීන වයර්.
- Black (X): Hot wire (Line 1).
- Red (Y): Hot wire (Line 2).
- Mount the Receptacle: Insert the receptacle body into the drilled hole. Secure the flanged outlet to the mounting surface using the provided screws. Ensure it is flush and stable.
- බලය ප්රතිස්ථාපනය කරන්න: ස්ථාපනය අවසන් වී සියලුම සම්බන්ධතා සත්යාපනය කළ පසු, පරිපථ කඩනයේ බලය ප්රතිස්ථාපනය කරන්න.
රූපය: ඉදිරිපස view of the Veepeak L14-30R flanged outlet with its weatherproof cap open, revealing the NEMA L14-30R locking receptacle.
මෙහෙයුම් උපදෙස්
- Opening the Cap: Lift the weatherproof cap to access the receptacle.
- Connecting a Plug: Align the NEMA L14-30P plug with the receptacle. Insert the plug and twist clockwise to lock it into place. Ensure the plug is fully seated and locked.
- Disconnecting a Plug: Twist the plug counter-clockwise to unlock, then pull it straight out from the receptacle.
- Closing the Cap: When the outlet is not in use, ensure the weatherproof cap is securely closed over the receptacle to protect it from environmental elements like rain, snow, and dust.
රූපය: ඉදිරිපස view of the Veepeak L14-30R flanged outlet with its weatherproof cap securely closed, providing protection.
නඩත්තු කිරීම
නිතිපතා නඩත්තු කිරීම ප්රශස්ත කාර්ය සාධනය සහ ආරක්ෂාව සහතික කරයි.
- පිරිසිදු කිරීම: Periodically clean the exterior of the outlet with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the cap is closed during cleaning.
- පරීක්ෂාව: Regularly inspect the outlet for any signs of damage, wear, or corrosion. Check the weatherproof cap for proper sealing.
- සම්බන්ධතා පරීක්ෂාව: Annually, or if issues arise, disconnect power and check the wiring connections for tightness. Loose connections can cause overheating.
දෝෂගවේෂණය
- බලය නැත:
- Check the circuit breaker or fuse for the circuit. Reset if tripped.
- බල ප්රභවය සක්රිය බව තහවුරු කරන්න.
- ප්ලග් එක සම්පූර්ණයෙන්ම ඇතුළු කර භාජනයට අගුළු දමා ඇති බවට වග බලා ගන්න.
- ලිහිල් සම්බන්ධතාවය:
- If the plug feels loose or power is intermittent, disconnect power and inspect the wiring connections at the back of the receptacle for tightness.
- Inspect the plug on the appliance for damage.
- Damage to Outlet:
- If the outlet housing or terminals show signs of damage, cracking, or burning, discontinue use immediately and replace the unit.
දෝශ නිරාකරණ පියවර මගින් ගැටළුව විසඳා නොගන්නේ නම්, සුදුසුකම් ලත් විදුලි කාර්මිකයෙකුගෙන් විමසන්න.
වගකීම් සහ සහාය
Veepeak provides a one-year hassle-free replacement warranty for this product. For warranty claims or customer service inquiries, please contact Veepeak customer support through the retailer where the product was purchased or visit the official Veepeak webඅඩවිය.
