TRENDnet TEW-923DAP

TRENDnet AX3000 Dual Band WiFi 6 PoE+ ප්‍රවේශ ලක්ෂ්‍යය TEW-923DAP උපදෙස් අත්පොත

1. ඉවරයිview

This manual provides detailed instructions for the installation, configuration, and operation of the TRENDnet AX3000 Dual Band WiFi 6 PoE+ Access Point, model TEW-923DAP. This device is designed to enhance wireless network performance with WiFi 6 technology, offering high-speed connectivity across two concurrent bands.

ප්රධාන ලක්ෂණ ඇතුළත් වේ:

  • AX3000 WiFi 6: Delivers up to 2402Mbps on the 5GHz band and 573Mbps on the 2.4GHz band.
  • 2.5GBASE-T PoE+ Port: Single port for both data and power, simplifying installation.
  • MU-MIMO සහ OFDMA: Technologies that improve efficiency and performance in environments with multiple connected devices.
  • WPA3 සංකේතනය: Enhanced wireless security protocol.
  • මෙහෙයුම් ආකාර: Supports Access Point (AP) and Repeater modes.
  • බෑන්ඩ් සුක්කානම: Automatically directs devices to the less congested 5GHz band.
  • අඩු-ප්‍රෝfile නිර්මාණය: Blends into various environments with included wall/ceiling mounting options.
TRENDnet AX3000 Dual Band WiFi 6 PoE+ Access Point TEW-923DAP

රූපය 1.1: ඉදිරිපස view of the TRENDnet AX3000 Dual Band WiFi 6 PoE+ Access Point.

AX3000 WiFi 6 Dual Band Speeds

Image 1.2: Diagram illustrating the AX3000 dual-band WiFi 6 speeds (2.4GHz at 573Mbps and 5GHz at 2402Mbps).

MU-MIMO and OFDMA Performance

Image 1.3: Illustration of MU-MIMO and OFDMA technology improving performance for multiple devices.

2. පැකේජ අන්තර්ගතය

ඔබේ පැකේජයේ පහත අයිතම අඩංගු බව තහවුරු කරන්න:

  • TRENDnet AX3000 Dual Band WiFi 6 PoE+ Access Point (TEW-923DAP)
  • ඉක්මන් ස්ථාපන මාර්ගෝපදේශය
  • ජාල කේබලය (මීටර් 0.5 / අඩි 1.64)
  • Mounting plates and hardware
TRENDnet TEW-923DAP and included accessories

Image 2.1: The TEW-923DAP Access Point shown with its included mounting plates, network cable, and installation hardware.

3. භෞතික විස්තරය

The TEW-923DAP features a compact, low-profile design. Key interfaces are located on the underside of the device.

3.1 උපාංග අතුරුමුහුණත්

  • 2.5GBASE-T PoE+ LAN Port: This port supports 802.3at PoE+ for both power input and data connection.
  • විදුලිබල වරාය: For optional 12V DC, 1A external power adapter (not included).
  • LED දර්ශකය: තත්ව තොරතුරු සපයයි.
  • යළි පිහිටුවීමේ බොත්තම: කර්මාන්තශාලා යළි පිහිටුවීම හෝ නැවත ආරම්භ කිරීම සඳහා භාවිතා වේ.
TRENDnet TEW-923DAP device interfaces

Image 3.1: Labeled view of the TEW-923DAP's LED indicator, power port, 2.5GBASE-T PoE+ LAN port, and reset button.

2.5G PoE+ Port closeup

රූපය 3.2: සමීප රූපය view of the 2.5G PoE+ port on the TEW-923DAP.

4. පිහිටුවීම සහ ස්ථාපනය

Follow these steps to install and set up your TRENDnet AX3000 Access Point.

4.1 ප්‍රවේශ ස්ථානය සවි කිරීම

The TEW-923DAP can be mounted on a wall or ceiling using the provided mounting plates.

  1. Select a central location for optimal WiFi coverage.
  2. Use the mounting plate as a template to mark drilling points on the wall or ceiling.
  3. Drill holes and insert the appropriate anchors if necessary.
  4. Secure the mounting plate to the surface.
  5. Attach the TEW-923DAP to the mounting plate by aligning and twisting until it locks into place.
Installation flexibility for wall or ceiling mounting

රූපය 4.1: උදාamples of the TEW-923DAP mounted on a wall and a ceiling, demonstrating installation flexibility.

4.2 උපාංගය බල ගැන්වීම

The TEW-923DAP supports Power over Ethernet Plus (PoE+).

  • Using PoE+: Connect an Ethernet cable from a PoE+ switch or PoE+ injector (e.g., TRENDnet 2.5G PoE+ Injector) to the 2.5GBASE-T PoE+ LAN port on the access point. This provides both power and data connectivity.
  • Using an AC Adapter (Optional): If PoE+ is not available, connect a 12V DC, 1A external power adapter (not included) to the power port.

4.3 Network Connection and Initial Configuration

  1. Connect the 2.5GBASE-T PoE+ LAN port to your network infrastructure (e.g., router or switch).
  2. Power on the device. The LED indicator will show the device status.
  3. Refer to the Quick Installation Guide for initial access credentials and instructions to log into the web- පදනම් වූ කළමනාකරණ අතුරු මුහුණත.
  4. Configure your desired WiFi network settings, including SSID, security type (WPA3 recommended), and passwords.
Office network diagram with TEW-923DAP

රූපය 4.2: උදාample network setup showing the TEW-923DAP in an office environment, connected via a 2.5G PoE+ Injector to a server rack.

5. මෙහෙයුම් ආකාර සහ විශේෂාංග

The TEW-923DAP offers flexible operating modes and advanced features to optimize your wireless network.

5.1 ප්‍රවේශ ලක්ෂ්‍ය (AP) මාදිලිය

In AP mode, the device creates a wireless local area network (WLAN) that allows wireless clients to connect to your wired network. This is the primary function for extending WiFi coverage.

5.2 පුනරාවර්තන මාදිලිය

In Repeater mode, the device extends the range of an existing wireless network by receiving wireless signals and re-transmitting them. This mode is useful for covering areas where the primary WiFi signal is weak.

5.3 Band Steering

Band Steering automatically detects dual-band capable client devices and encourages them to connect to the 5GHz band. This helps to balance network load and improve overall performance by moving devices to the faster, less congested 5GHz frequency.

5.4 Wireless Security (WPA3)

The access point supports WPA3 encryption, providing robust security for your wireless network. It is recommended to use WPA3 for maximum protection against unauthorized access.

5.5 MU-MIMO and OFDMA

These WiFi 6 technologies enhance network efficiency:

  • MU-MIMO (බහු-පරිශීලක, බහු-ආදාන, බහු-ප්‍රතිදාන): Allows the access point to communicate with multiple devices simultaneously, rather than sequentially, improving throughput for all connected clients.
  • OFDMA (විකලාංග සංඛ්‍යාත-අංශ බහු ප්‍රවේශය): Divides WiFi channels into smaller sub-channels, enabling the access point to transmit data to multiple devices at once within a single transmission, reducing latency and improving efficiency.

6. නඩත්තු කිරීම

නිතිපතා නඩත්තු කිරීම ඔබේ පිවිසුම් ස්ථානයේ ප්‍රශස්ත ක්‍රියාකාරිත්වය සහ කල්පැවැත්ම සහතික කරයි.

  • ස්ථිරාංග යාවත්කාලීන කිරීම්: Periodically check the TRENDnet website for firmware updates. Keeping the firmware current can improve performance, add new features, and address security vulnerabilities.
  • භෞතික පරිසරය: Ensure the access point is installed in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Avoid placing it near large metal objects or other devices that may cause interference.
  • පිරිසිදු කිරීම: Gently clean the exterior of the device with a soft, dry cloth. Do not use liquid or aerosol cleaners.
  • ජාල ආරක්ෂාව: නිතිපතා නැවතview your WiFi security settings and change passwords periodically to maintain network integrity.

7. දෝශ නිරාකරණය

If you encounter issues with your TEW-923DAP, refer to the following common troubleshooting steps.

7.1 බලය නැත/LED දර්ශකය අක්‍රියයි

  • Verify that the Ethernet cable is securely connected to a PoE+ source.
  • If using an optional power adapter, ensure it is correctly plugged into the device and a working power outlet.
  • Check the PoE+ source (switch or injector) to ensure it is providing power.

7.2 අන්තර්ජාල ප්‍රවේශය නැත

  • Confirm that the access point is properly connected to your main network (router/modem).
  • Check the status of your internet service provider's connection.
  • Reboot the access point and your main network router.
  • Ensure your client devices are connected to the correct WiFi network (SSID) and have the correct password.

7.3 Slow WiFi Speed or Intermittent Connection

  • Relocate the access point to a more central position, away from obstructions and potential interference sources (e.g., microwaves, cordless phones).
  • Ensure your client devices support WiFi 6 for optimal performance.
  • Check for firmware updates for the access point.
  • Verify that Band Steering is enabled to optimize client connections.

7.4 කර්මාන්තශාලා යළි පිහිටුවීම

ගැටළු දිගටම පවතින්නේ නම්, ඔබට කර්මාන්තශාලා යළි පිහිටුවීමක් සිදු කිරීමට අවශ්‍ය විය හැකිය. මෙය සියලු සැකසුම් ඒවායේ පෙරනිමි අගයන් වෙත ප්‍රතිවර්තනය කරනු ඇත.

  • With the device powered on, use a paperclip or similar pointed object to press and hold the Reset button for approximately 10-15 seconds until the LED indicator changes behavior (e.g., flashes rapidly).
  • Release the button and allow the device to reboot.
  • After a factory reset, you will need to reconfigure the access point.

8. පිරිවිතර

විශේෂාංගයවිස්තර
ආදර්ශ අංකයTEW-923DAP
රැහැන් රහිත වර්ගය802.11ax (WiFi 6)
සංඛ්යාත කලාප පන්තියද්විත්ව කලාප (2.4GHz සහ 5GHz)
2.4GHz වේගය573Mbps දක්වා
5GHz වේගය2402Mbps දක්වා
LAN වරාය1 x 802.3at PoE+ 2.5GBASE-T
රැහැන් රහිත ආරක්ෂාවWPA3
මෙහෙයුම් පද්ධතියලිනක්ස්
අයිතමයේ බරඅවුන්ස 13.4 කි
නිෂ්පාදන මානයන් (LxWxH)අඟල් 6.3 x 6.3 x 1.18
වර්ණයසුදු
වෙළුමtage56 Volts (DC)
විශේෂ ලක්ෂණAccess Point Mode, Repeater Mode, LED Indicator, Band Steering, MU-MIMO, OFDMA
අනුකූල වීමNDAA & TAA Compliant

9. වගකීම් සහ සහාය

For warranty information, technical support, and additional resources, please visit the official TRENDnet webඅඩවියෙන් හෝ ඔබේ නිෂ්පාදනය සමඟ ඇතුළත් කර ඇති ලියකියවිලි වෙත යොමු වන්න.

ඔබට ද නැරඹිය හැකිය TRENDnet Store on Amazon තවත් නිෂ්පාදන සහ තොරතුරු සඳහා.

අදාළ ලියකියවිලි - TEW-923DAP

පෙරview TRENDnet TEW-840APBO (V1) ඉක්මන් ස්ථාපන මාර්ගෝපදේශය
WDS භාවිතයෙන් ලක්ෂ්‍යයෙන් ලක්ෂ්‍යයට පාලමක් ස්ථාපිත කිරීම සඳහා TRENDnet TEW-840APBO (V1) රැහැන් රහිත ප්‍රවේශ ලක්ෂ්‍යය ස්ථාපනය කිරීම සහ වින්‍යාස කිරීම සඳහා සංක්ෂිප්ත මාර්ගෝපදේශයකි.
පෙරview TRENDnet TEW-740APBO V3.0 ඉක්මන් ස්ථාපන මාර්ගෝපදේශය
මෙම මාර්ගෝපදේශය TRENDnet TEW-740APBO V3.0 රැහැන් රහිත ප්‍රවේශ ලක්ෂ්‍යය ස්ථාපනය කිරීම සහ වින්‍යාස කිරීම සඳහා පියවරෙන් පියවර උපදෙස් සපයයි, එයට දෘඩාංග සැකසුම, ජාල වින්‍යාසය සහ WDS පාලම් සැකසුම ඇතුළත් වේ.
පෙරview TRENDnet TEW-412APBO/TEW-413APBO රැහැන් රහිත 11g එළිමහන් AP පාලම ඉක්මන් ස්ථාපන මාර්ගෝපදේශය
මෙම මාර්ගෝපදේශය TRENDnet හි TEW-412APBO සහ TEW-413APBO රැහැන් රහිත 11g එළිමහන් AP පාලම් ස්ථාපනය කිරීම සහ වින්‍යාස කිරීම සඳහා උපදෙස් සපයයි. එය දෘඩාංග අවශ්‍යතා, ජාල සැකසුම, විශාරද වින්‍යාසය, පරීක්ෂා කිරීම සහ දෝශ නිරාකරණය ආවරණය කරයි.
පෙරview TRENDnet AC2600 MU-MIMO WiFi රවුටරය TEW-827DRU පරිශීලක මාර්ගෝපදේශය
මෙම සවිස්තරාත්මක පරිශීලක මාර්ගෝපදේශය TRENDnet AC2600 MU-MIMO WiFi රවුටරයේ (TEW-827DRU) සැකසුම, වින්‍යාසය සහ උසස් විශේෂාංග විස්තර කරයි. ඔබේ ගෘහ ජාලය ප්‍රශස්ත කිරීම සඳහා ස්ථාපනය, රැහැන් රහිත ආරක්ෂාව, USB ආචයනය, VPN සහ දෝශ නිරාකරණය ගැන ඉගෙන ගන්න.
පෙරview TRENDnet TEW-WLC100 (V1) ඉක්මන් ස්ථාපන මාර්ගෝපදේශය
මෙම මාර්ගෝපදේශය TRENDnet TEW-WLC100 රැහැන් රහිත LAN පාලකය ස්ථාපනය කිරීම සහ වින්‍යාස කිරීම සඳහා පියවරෙන් පියවර උපදෙස් සපයයි. එය පැකේජ අන්තර්ගතය, අවම අවශ්‍යතා, ප්‍රවේශ ලක්ෂ්‍ය අනුකූලතාව, ආරම්භක පාලක සැකසුම, ප්‍රවේශ ලක්ෂ්‍ය සම්බන්ධ කිරීම සහ මූලික රැහැන් රහිත වින්‍යාසය ආවරණය කරයි. අනුකූලතා සහ සහතික කිරීමේ තොරතුරු ඇතුළත් වේ.
පෙරview TRENDnet TEW-430APB රැහැන් රහිත G LAN ප්‍රවේශ ලක්ෂ්‍ය ඉක්මන් ස්ථාපන මාර්ගෝපදේශය
This guide provides step-by-step instructions for installing and configuring the TRENDnet TEW-430APB Wireless G LAN Access Point. It covers hardware setup, TCP/IP configuration for Windows operating systems, wireless network setup, and troubleshooting common issues.