වැදගත් ආරක්ෂක තොරතුරු
එකලස් කිරීමට සහ භාවිතා කිරීමට පෙර කරුණාකර සියලු උපදෙස් කියවා තේරුම් ගන්න. අනාගත යොමුව සඳහා මෙම අත්පොත තබා ගන්න.
- බර ධාරිතාව: උපරිම බර ධාරිතාව රාත්තල් 794 (කිලෝග්රෑම් 360) නොඉක්මවන්න.
- Headboard Adjustment: Be cautious when adjusting the headboard height to prevent injury. Ensure all fasteners are securely tightened after adjustment.
- එකලස් කිරීම: Assemble the bed frame on a soft, clean surface to prevent scratches. Ensure all parts are present before beginning assembly.
- නඩත්තු: Regularly check all bolts and connections to ensure they remain tight. Loose connections can lead to instability and potential injury.
- දරුවන්: හුස්ම හිරවීමේ අනතුරු වළක්වා ගැනීම සඳහා කුඩා කොටස් සහ ඇසුරුම් ද්රව්ය ළමයින්ගෙන් ඈත් කර තබන්න.
පැකේජයේ අන්තර්ගතය
Verify that all components listed below are present before starting assembly. Refer to the assembly video for visual identification of parts.
රූපය: පිපිරුණා view of all bed frame components, including headboard, side rails, center support bars, legs, wooden slats, and hardware. Each part is labeled for easy identification during assembly.
කොටස් ලැයිස්තුව:
- A: Headboard (1 pc)
- B: Left Side Rail (1 pc)
- C1/C2: Wooden Slats (12 pcs total)
- ඩී1/ඩී2: Center Support Bars (2 pcs)
- E: Right Side Rail (1 pc)
- F: Headboard Support Legs (2 pcs)
- G: Center Support Leg (1 pc)
- H: Cross Support Bar (1 pc)
- I: Bed Legs (4 pcs)
- J: Headboard Brackets (2 pcs)
- K: Center Support Brackets (2 pcs)
- L: Corner Brackets (4 pcs)
- M: Side Rail Connectors (2 pcs)
- N: Footboard Connectors (2 pcs)
- O: බෝල්ට් (විවිධ ප්රමාණ)
- P: Washers (various sizes)
- Q: ඇලන් රෙන්ච් (1 pc)
- R: ඉස්කුරුප්පු (විවිධ ප්රමාණ)
- S: Nuts (various sizes)
එකලස් කිරීමේ උපදෙස්
Follow these steps carefully for proper assembly. An assembly video is provided for visual guidance.
වීඩියෝ: This official Yaheetech assembly video provides a step-by-step visual guide for constructing the upholstered bed frame. It demonstrates how to connect the headboard, side rails, center supports, and slats.
පියවරෙන් පියවර මාර්ගෝපදේශය:
- Attach Headboard Support Legs: Securely attach the Headboard Support Legs (F) to the Headboard (A) using the provided bolts (O) and washers (P). Use the Allen wrench (Q) to tighten.
- පැති රේල් පීලි එකලස් කරන්න: Connect the Left Side Rail (B) and Right Side Rail (E) to the Headboard Support Legs (F) using the Side Rail Connectors (M) and appropriate hardware. Ensure a snug fit.
- Install Center Support Bars: Attach the Center Support Bars (D1, D2) to the side rails. Connect the Cross Support Bar (H) between the two center support bars using bolts (O) and nuts (S).
- මධ්ය ආධාරක කකුල් අමුණන්න: Fasten the Center Support Leg (G) to the Cross Support Bar (H) for additional stability.
- Install Bed Legs: Screw the Bed Legs (I) into the designated corners of the bed frame.
- ලී පුවරු තබන්න: Lay the Wooden Slats (C1, C2) across the bed frame. Secure them in place using the hook & loop fasteners or screws (R) as indicated in the video. Ensure even spacing for optimal mattress support.
- අවසාන තද කිරීම: Double-check all bolts and screws to ensure they are fully tightened before placing the mattress on the frame.
මෙහෙයුම් උපදෙස්
Height-Adjustable Headboard:
The upholstered headboard can be adjusted to your preferred height. It ranges from 44.5 inches to 48.5 inches. To adjust, loosen the bolts connecting the headboard to its support legs, slide the headboard to the desired height, and then securely re-tighten the bolts. This allows for optimal comfort when reading or relaxing in bed.
රූපය: A visual representation of the headboard's height adjustment mechanism, illustrating the range of 44.5 to 48.5 inches.
පෙට්ටි වසන්තය අවශ්ය නොවේ:
This platform bed frame is designed to support your mattress directly, eliminating the need for a box spring. Simply place your latex, foam, or spring mattress on the wooden slats after assembly.
නඩත්තු කිරීම
- පිරිසිදු කිරීම: Wipe the bed frame with a dry cloth to remove dust and debris. For upholstered areas, use a soft brush or vacuum with an upholstery attachment. Avoid harsh chemicals or abrasive cleaners.
- නිතිපතා චෙක්පත්: Periodically inspect all screws, bolts, and connections to ensure they are tight. Re-tighten any loose fasteners to maintain stability and prevent squeaking.
- Underbed Space: අඟල් 6.3 ක බිම් නිෂ්කාශනය මඟින් ඇඳ යට පහසුවෙන් පිරිසිදු කිරීමට ඉඩ සලසයි, ඒ අතර රොබෝ වැකුම් ක්ලීනර් සඳහා ප්රවේශයද ඇතුළත් වේ.
රූපය: A robot vacuum cleaner operating beneath the bed frame, demonstrating the convenient 6.3-inch underbed clearance for cleaning.
දෝෂගවේෂණය
- කිවිසුම් ශබ්ද: If the bed frame makes squeaking noises, check all bolts and screws. Tighten any loose fasteners. The frame is designed with EVA foam to minimize noise, but periodic checks are recommended.
- අස්ථාවරත්වය/සෙලවීම: Ensure all connections are fully tightened. Verify that the center support legs are properly installed and making firm contact with the floor.
- ස්ලැට් මාරු කිරීම: Ensure the wooden slats are correctly positioned and secured by their hook & loop fasteners or screws. If any slats are damaged, contact customer support for replacements.
පිරිවිතර
| ආදර්ශ අංකය | 613858 |
| ප්රමාණය | රැජින |
| නිෂ්පාදන මානයන් | 81"අඟල් x 62.5"අඟල් x 48.5"උ |
| ද්රව්ය | Linen, Metal, Wood |
| වර්ණය | බීජ් |
| බර ධාරිතාව | රාත්තල් 794 (කිලෝග්රෑම් 360) |
| Headboard Height Adjustment | 44.5" සිට 48.5" දක්වා |
| යටි ඇඳ නිෂ්කාශනය | අඟල් 6.3 |
| එකලස් කිරීම අවශ්ය වේ | ඔව් |
| රැකවරණ උපදෙස් | වියළි රෙද්දකින් පිස දමන්න |
රූපය: Detailed dimensions of the Yaheetech Queen Upholstered Bed Frame, including length, width, and adjustable headboard height.
වගකීම් සහ සහාය
For warranty information, replacement parts, or further assistance, please contact Yaheetech customer support. Refer to your purchase documentation for specific warranty terms and contact details.
You can also visit the official Yaheetech store for more products and support: යාහීටෙක් වෙළඳසැල
