1. හැඳින්වීම
The Thermaltake Smart BM3 650W 80Plus Bronze certified semi-modular power supply is designed to meet ATX 3.1 standards and includes one PCIe Gen 5 (12V-2x6) connector, supporting modern graphics cards. This power supply features a 120mm Fluid Dynamic Bearing (FDB) fan for efficient airflow and a Smart Zero Fan function to minimize noise under low loads. High-quality Japanese main electrolytic capacitors enhance durability and ensure stable, reliable power delivery.
2 ප්රධාන ලක්ෂණ
- 80Plus Bronze Certified: Ensures up to 85% efficiency at 115Vac input.
- ATX 3.1 & PCIe Gen 5 Ready: Fully compatible with Intel ATX 3.1 standards and includes a 12V-2x6 connector for PCIe Gen 5 graphics cards.
- High Quality Japanese Capacitors: Features 105°C/221°F Japanese main electrolytic capacitors for improved durability and reliability.
- 120mm FDB Fan with Smart Zero Fan: Provides excellent airflow. The fan remains off until the load exceeds 20% of the power supply's capacity, ensuring quiet operation.
- Built-in Industrial Grade Protection: Includes OCP (Over Current Protection), OVP (Over Voltagඊ ආරක්ෂණය), UVP (වෙළුම යටතේtage Protection), OPP (Over Power Protection), OTP (Over Temperature Protection), and SCP (Short Circuit Protection).
- Semi-Modular Flat Cable Design: Soft flat black cables with sleeve cabling for easy installation and optimal cable management.
3. පැකේජ අන්තර්ගතය
පැකේජය විවෘත කරන විට, පහත සඳහන් සියලු අයිතම එහි ඇති බවට වග බලා ගන්න:
- Thermaltake Smart BM3 650W Power Supply Unit
- AC විදුලි රැහැන
- Modular Cable Set (Main Power, ATX 12V, PCIe, SATA, Peripheral)
- සවිකරන ඉස්කුරුප්පු
- කේබල් බැඳීම්
- පරිශීලක අත්පොත
4. ස්ථාපන මාර්ගෝපදේශය
Follow these steps to properly install your Thermaltake Smart BM3 650W Power Supply into your computer system.
4.1. ඔබේ පද්ධතිය සූදානම් කරන්න
- ආරක්ෂාව පළමුව: Always disconnect the AC power cord from the wall outlet before installing or removing any components.
- පරිගණක කවරය විවෘත කරන්න: අභ්යන්තර සංරචක වෙත ප්රවේශ වීම සඳහා ඔබේ පරිගණක ආවරණයේ පැති පුවරුව ඉවත් කරන්න.
- පැරණි PSU ඉවත් කරන්න (අදාළ නම්): ඔබගේ පැරණි බල සැපයුමෙන් සියලුම කේබල් විසන්ධි කර එය නඩුවෙන් ඉවත් කරන්න.
4.2. Install the Power Supply Unit
- PSU සවිකිරීම: Carefully slide the new Thermaltake Smart BM3 650W Power Supply into the designated PSU bay in your PC case. Ensure the fan is facing the correct direction (usually downwards for bottom-mounted PSUs, or as per case design for optimal airflow).
- Secure PSU: Use the provided mounting screws to secure the power supply to the PC case.
- මොඩියුලර් කේබල් සම්බන්ධ කරන්න: Attach only the necessary modular cables to the power supply unit. This semi-modular design allows for better cable management and airflow.
- මවු පුවරුවට සම්බන්ධ වන්න:
- Connect the 24-pin Main Power connector to your motherboard.
- Connect the 4+4-pin ATX 12V CPU power connector(s) to your motherboard.
- Connect to Graphics Card (GPU):
- For modern GPUs, connect the 12V-2x6 (PCIe Gen 5) connector directly to your graphics card.
- For other GPUs, connect the appropriate 6+2-pin PCIe connectors.
- Connect to Storage Devices: Connect SATA power cables to your SSDs, HDDs, and other SATA-powered devices.
- පර්යන්ත සම්බන්ධ කරන්න: Connect peripheral 4-pin Molex connectors to any other devices requiring them (e.g., older fans, fan controllers).
- කේබල් කළමනාකරණය: Route cables neatly behind the motherboard tray or in designated channels to improve airflow and aesthetics. Use cable ties if necessary.
Figure 4.2.1: Thermaltake Smart BM3 650W Power Supply with its semi-modular cables connected.
Figure 4.2.2: Diagram illustrating the modular cable connections on the power supply unit.
Figure 4.2.3: Close-up of the PCIe Gen 5.0 (12VHPWR) connector for modern graphics cards.
4.3. අවසාන පියවර
- පරිගණක කවරය වසන්න: ඔබේ පරිගණක නඩුවේ පැති පුවරුව නැවත අමුණන්න.
- AC බලය සම්බන්ධ කරන්න: Plug the AC power cord into the power supply unit and then into a wall outlet.
- බල ගැන්වීම: Flip the main power switch on the back of the PSU to the 'ON' position.
5. මෙහෙයුම් උපදෙස්
5.1. Smart Zero Fan Function
The Smart Zero Fan function is designed to minimize noise. When enabled, the 120mm FDB fan will not spin until the power supply load exceeds 20% of its maximum capacity. This ensures silent operation during low-load tasks.
- To Enable/Disable: Locate the "Smart Zero Fan" switch on the back of the power supply unit.
- ස්ථානයේ: Fan will only spin when load exceeds 20%.
- අක්රිය ස්ථානය: Fan will operate continuously regardless of load.
Figure 5.1.1: Location of the Smart Zero Fan switch on the power supply.
6. නඩත්තු කිරීම
නිසි නඩත්තුව ඔබේ බල සැපයුමේ ආයු කාලය සහ ප්රශස්ත ක්රියාකාරිත්වය සහතික කරයි.
- දූවිලි පිරිසිදු කිරීම: Regularly clean the fan and ventilation grilles of the power supply to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air for best results.
- කේබල් පරීක්ෂාව: Periodically check all connected cables for any signs of wear, damage, or loose connections.
- පාරිසරික තත්ත්වයන්: Ensure the power supply operates within recommended temperature and humidity ranges (Operating Temperature: 5°C to +40°C; Operating Humidity: 20% to 85%, non-condensing).
7. දෝශ නිරාකරණය
ඔබේ බල සැපයුමේ ගැටළු ඇති වුවහොත්, පහත පොදු දෝශ නිරාකරණ පියවර වෙත යොමු වන්න:
- බලය නැත:
- AC විදුලි රැහැන PSU සහ බිත්ති අලෙවිසැල යන දෙකටම ආරක්ෂිතව සම්බන්ධ කර ඇති බවට සහතික වන්න.
- Verify the main power switch on the PSU is in the 'ON' position.
- Check all internal power connections (24-pin, ATX 12V, PCIe) to ensure they are firmly seated.
- බිත්ති පිටවීම වෙනත් උපාංගයකින් පරීක්ෂා කර එයට බලය ඇති බව තහවුරු කරන්න.
- පද්ධති අස්ථාවරත්වය/අහඹු වසා දැමීම්:
- This could indicate insufficient wattage or a faulty component. Ensure your total system power draw does not exceed the PSU's 650W capacity.
- Check for overheating. Ensure proper airflow within the case and that the PSU fan is operating (if Smart Zero Fan is off or under load).
- Verify all modular cables are correctly connected to the PSU and components.
- Fan Not Spinning (Smart Zero Fan ON):
- This is normal if the system load is below 20%. The fan will activate automatically when the load increases.
- If the system is under heavy load and the fan is still not spinning, try switching the Smart Zero Fan to 'OFF' to force it on. If it still doesn't spin, contact support.
If issues persist after following these steps, please contact Thermaltake customer support for further assistance.
8. පිරිවිතර
| ආදර්ශ අංකය | PS-SPD-0650MNFABU-3 |
| වොට් | 650W |
| කාර්යක්ෂමතාව | 80 PLUS® Bronze at 115Vac input |
| ආකෘති සාධකය | ATX |
| මානයන් (LxWxH) | 150mm(W) x 86mm(H) x 140mm(D) (5.9 x 3.4 x 5.5 inches) |
| සිසිලන පද්ධතිය | 12cm FDB Fan with Smart Zero Fan function |
| ප්රධාන ධාරිත්රකය | High quality Japanese 105°C/221°F electrolytic capacitor |
| PFC (බල සාධක නිවැරදි කිරීම) | ක්රියාකාරී PFC |
| ආදාන වෙළුමtage | 100-240V~ |
| ආදාන සංඛ්යාත පරාසය | 50Hz/60Hz |
| MTBF | අවම වශයෙන් පැය 100,000 |
| ආරක්ෂිත අනුමැතිය | FCC/ICES/CB/cTUVus/S-mark |
| PCI-E 6+2PIN Connectors | 4 |
| PCI-E 12+4PIN (12V-2x6) Connector | 1 (300W) |
Figure 8.1: Cable connector types, quantities, and lengths.
9. ආරක්ෂණ විශේෂාංග
The Thermaltake Smart BM3 650W Power Supply is equipped with multiple industrial-grade protection circuits to safeguard your system components:
- OCP (වත්මන් ආරක්ෂාවට වඩා): Protects against excessive current on output rails.
- OVP (වැඩිපුරtagඊ ආරක්ෂාව): Shuts down the PSU if voltage on any rail exceeds a safe level.
- UVP (වෙළුම යටතේtagඊ ආරක්ෂාව): Shuts down the PSU if voltage on any rail drops below a safe level.
- OPP (Over Power Protection): Protects the PSU from operating beyond its maximum wattage.
- OTP (උෂ්ණත්ව ආරක්ෂණය): Shuts down the PSU if internal temperatures become too high.
- SCP (කෙටි පරිපථ ආරක්ෂාව): Prevents damage to the PSU and components in case of a short circuit.
රූපය 9.1: අවසන්view of built-in industrial grade protection features.
10. වගකීම් සහ සහාය
The Thermaltake Smart BM3 series power supplies come with an ample වසර 5ක වගකීමක්. This warranty covers defects in materials and workmanship under normal use. For detailed warranty terms and conditions, please refer to the warranty card included in your product packaging or visit the official Thermaltake webඅඩවිය.
For technical support, troubleshooting assistance, or warranty claims, please contact Thermaltake customer service through their official support channels.
