maXpeedingrods 5000 lbs Air Suspension Bags Kit & On Board Air Compressor Kit

1 ආරක්ෂිත තොරතුරු

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in personal injury or damage to the product or vehicle.

• ස්ථාපනය අතරතුර සෑම විටම ආරක්ෂිත කණ්නාඩි සහ අත්වැසුම් ඇතුළු සුදුසු පුද්ගලික ආරක්ෂක උපකරණ පළඳින්න.
• වාහනය යට වැඩ කිරීමට පෙර ජැක් ස්ටෑන්ඩ් මත ආරක්ෂිතව ආධාරක කර ඇති බවට වග බලා ගන්න. කිසි විටෙකත් ජැක් එකක් මත පමණක් රඳා නොසිටින්න.
• ඕනෑම විදුලි වැඩක් කිරීමට පෙර වාහනයේ බැටරිය විසන්ධි කරන්න.
• Do not exceed the maximum recommended air pressure of 100 PSI for the air springs. The recommended working pressure is 5-70 PSI.
• This kit is designed for Ford F-150 PICKUP 4WD 2004-2014 models. It is නැත suitable for Raptor models.
• All modifications must be installed by qualified personnel and in accordance with local modification regulations.

2. නිෂ්පාදන අවසන්view

The maXpeedingrods Air Suspension Bags Kit and On Board Air Compressor Kit provides enhanced stability and improved handling for vehicles hauling heavy loads or towing trailers. This system eliminates the need for manual inflation, offering convenient air pressure control from within the vehicle.

ප්රධාන ප්රතිලාභ ඇතුළත් වේ:

• Stability and Comfort: Reduces wear and tear, eliminates squat, minimizes trailer sway, and prevents bottoming out.
• වැඩි දියුණු කළ කල්පැවැත්ම: Air springs are crafted from multi-ply natural rubber with a thickness of 4-4.5mm, ensuring superior sealing and resistance to wear and tear.
• අභ්‍යන්තර ජවුන්ස් බම්පරය: Provides extra protection against abrupt bottoming-out of the suspension at full compression.
• Easy to Air Up: The universal air spring controller kit features a durable on-board compressor capable of a maximum air pressure of 100 PSI, allowing quick inflation of air springs.
• පහසු පාලනය: Adjust air pressure from the driver's seat using the included gauge panel.
• තනි මාර්ග පද්ධතිය: Designed to raise the pressure in both air springs evenly for balanced load distribution.

Image: Convenient control of air pressure from the driver's seat, shown with a truck towing a trailer.

Image: Illustration of the single path system, ensuring even pressure distribution to both air springs.

රූපය: සමීප රූපය view of an air spring highlighting the internal jounce bumper, designed to prevent harsh bottoming-out.

3. පැකේජ අන්තර්ගතය

Verify that all components listed below are present in your kit before beginning installation:

• 1 x 12V MXR Air Compressor (Black)
• 1 x Gauge panel (with push buttons for up and down)
• 1 x Air Line φ6*1 (6M)
• 1 x Wire harness (2.5 M) black
• 1 x Wire harness (8.5 M) red
• 1 x Relay harness (1 M)
• 3 x T Connectors
• 1 x Mounting Hardware kit (includes bolts, nuts, washers, zip ties, tubing cutter, in-line fuse)
• Upper and lower mounting brackets
• රෝල් තහඩු
• Air bags (2 units)

Image: Visual representation of the complete package contents, including air bags, mounting hardware, air lines, and control unit.

4. ස්ථාපනය

Professional installation is highly recommended for this air suspension and compressor kit. Refer to the detailed installation guide provided with your product for specific steps and diagrams. The following provides a general overview and highlights key features:

1. වාහනය සූදානම් කරන්න: Safely lift and support the rear of the vehicle. Disconnect the battery.
2. Mount Air Springs: Install the air springs using the provided upper and lower mounting brackets. Ensure proper alignment and secure fastening.
3. Install Compressor: Select a suitable, protected location for the 12V MXR Air Compressor. It is designed to be compact and lightweight for flexible mounting.
4. ගුවන් ගමන් මාර්ග: Connect the air lines from the air springs to the compressor and the gauge panel. The single path system ensures even pressure. Utilize the provided tubing cutter for clean cuts.
5. Wire Electrical Components: Connect the compressor and gauge panel to the vehicle's electrical system using the provided wire harnesses and relay harness. Ensure all connections are secure and protected. Dacromet-plated bolts offer exceptional corrosion resistance and heat durability for secure connections.
6. පාලක පැනලය සවි කරන්න: Install the gauge panel in a convenient location within the vehicle's cabin, allowing easy access for air pressure adjustments.
7. පරීක්ෂණ පද්ධතිය: After installation, perform a thorough air-tightness inspection to ensure no leaks. Inflate the air springs to the recommended pressure and check for proper operation.

Image: Installation diagram illustrating the connection of the air compressor, gauge, and air springs, along with reference inflation times.

Image: Detail of leak-proof upgrades, including quick-connect compressor fittings and barbed gauge ports for a secure air seal.

5. මෙහෙයුම් උපදෙස්

The on-board air compressor and control panel allow for convenient adjustment of your air suspension system:

• උද්ධමනය: To increase air pressure, activate the compressor using the switch on the gauge panel. Monitor the pressure gauge to reach the desired PSI.
• අවධමනය: To decrease air pressure, use the release button on the gauge panel.
• නිර්දේශිත පීඩනය: Maintain air pressure between 5 PSI (minimum) and 70 PSI (recommended maximum for regular use). Do not exceed 100 PSI.
• අධීක්ෂණය: Regularly check the air pressure, especially before and during towing or hauling heavy loads, to ensure optimal vehicle leveling and stability.

Image: Visual comparison demonstrating the load-leveling effect of the air suspension kit, showing a truck and trailer before and after proper loading.

6. නඩත්තු කිරීම

නිතිපතා නඩත්තු කිරීම ඔබේ වායු අත්හිටුවීමේ පද්ධතියේ ආයු කාලය සහ ප්‍රශස්ත ක්‍රියාකාරිත්වය සහතික කිරීමට උපකාරී වේ:

• Inspect Air Lines and Connections: Periodically check all air lines and fittings for signs of wear, kinks, or leaks. Repair or replace as necessary.
• Check Air Springs: Inspect the air bags for any visible damage, cracks, or abrasions. Ensure they are free from debris.
• Compressor Inspection: Ensure the compressor is clean and free from obstructions. Check electrical connections for corrosion or looseness.
• Maintain Proper Pressure: Always operate the air springs within the recommended pressure range (5-70 PSI) to prevent damage.

7. දෝශ නිරාකරණය

If you encounter issues with your air suspension system, consider the following common problems and solutions:

• System Not Inflating:
  • Check power supply to the compressor and control panel. Ensure all electrical connections are secure and the in-line fuse is intact.
  • Verify air lines are properly connected and free from kinks or blockages.
  • Inspect the compressor for any signs of malfunction.
• වාතය කාන්දු වීම:
  • Spray soapy water on all air line connections, air springs, and valve stems. Bubbles indicate a leak.
  • Tighten loose connections or replace damaged components.
• අසමාන උද්ධමනය:
  • Ensure the single path system is correctly installed and free from obstructions.
  • Check for individual air spring or air line damage that might affect one side more than the other.

If problems persist, contact maXpeedingrods customer support or consult a qualified automotive technician.

8. පිරිවිතර

Image: An air spring highlighting its load-leveling capacity of up to 5000 lbs.

9. වගකීම් සහ සහාය

For warranty information, product support, or to purchase replacement parts, please refer to the documentation included with your product or visit the official maXpeedingrods webඅඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.