Electro-Harmonix Pico Triboro Bridge Overdrive, Distortion & Fuzz Pedal User Manual

1. නිෂ්පාදන අවසන්view

The Electro-Harmonix Pico Triboro Bridge is a versatile multi-mode drive pedal designed to provide a wide range of tonal possibilities. It features three distinct modes: Overdrive, Distortion, and Fuzz, allowing musicians to bridge any gap in their gain requirements. With its powerful EQ capabilities, input contouring, and compact pico-sized footprint, the Triboro Bridge can serve as a foundational element for your tone or offer a fresh alternative to your existing drive pedals.

ප්රධාන ලක්ෂණ:

• Wide range of saturation with Overdrive, Distortion, and Fuzz modes.
• Treble control boosts or cuts high end in Overdrive and Distortion modes.
• Bass control boosts or cuts low end in Overdrive and Distortion modes.
• Fuzz mode features a dedicated Gate control and a Low Pass Filter.
• Includes a power adapter for immediate use.

රූපය: කෝණික view of the Electro-Harmonix Pico Triboro Bridge pedal, highlighting its compact size and control knobs.

2. සැකසුම සහ සම්බන්ධතා

Follow these steps to connect your Pico Triboro Bridge pedal to your audio setup:

1. බල සම්බන්ධතාවය: Connect the included 9V DC power adapter to the power jack on the top of the pedal. Ensure the power supply meets the pedal's specifications (9V DC, center-negative).
2. ආදාන සම්බන්ධතාවය: Connect your instrument (guitar, bass, etc.) to the INPUT jack on the right side of the pedal using a standard 1/4-inch instrument cable.
3. ප්රතිදාන සම්බන්ධතාවය: පැඩලයේ වම් පැත්තේ ඇති OUTPUT ජැක් එක ඔබේ එකට සම්බන්ධ කරන්න ampසම්මත අඟල් 1/4 උපකරණ කේබලයක් භාවිතයෙන් ඔබේ සංඥා දාමයේ ලිෆයර් හෝ ඊළඟ පැඩලය.
4. බල ගැන්වීම: Once all connections are secure, plug the power adapter into a wall outlet. The pedal's LED will illuminate when active.

රූපය: පසුපස view of the Pico Triboro Bridge pedal, showing the power input jack for connecting the power adapter.

3. පාලනයන් සහ ක්‍රියාකාරිත්වය

The Pico Triboro Bridge features intuitive controls for shaping your desired drive tone. Understanding each knob and button is key to unlocking its full potential.

පාලන බොත්තම්:

• VOL (වෙළුම): Controls the overall output level of the pedal. Adjust this to balance the effect's volume with your bypassed signal or other effects.
• ලාභය: Controls the intensity of the drive, distortion, or fuzz effect. Higher settings result in more saturation and sustain.
• BASS / GATE:
  • In Overdrive and Distortion modes, this knob functions as a බාස් control, allowing you to boost or cut low frequencies.
  • In Fuzz mode, this knob functions as a ගේට්ටුව control, adjusting the noise gate threshold to eliminate unwanted noise and feedback.
• TREBLE / TONE:
  • In Overdrive and Distortion modes, this knob functions as a ට්‍රිබල් control, allowing you to boost or cut high frequencies.
  • In Fuzz mode, this knob functions as a ටෝන් control, specifically a Low Pass Filter, for extreme tonal variations and shaping the fuzz character.

TYPE Button:

The small button labeled "TYPE" at the top of the pedal is used to select between the three primary drive modes and to engage the Input Contour Mode.

• මාදිලිය තේරීම: Pressing the TYPE button cycles through the Overdrive (green LED), Distortion (orange LED), and Fuzz (red LED) modes.
• Input Contour Mode: Press and hold the TYPE button to enable or disable the Input Contouring EQ. When active, this mode applies a specific EQ to the input signal for a tighter, more modern character across all drive modes.

රූපය: ඉහළට view of the Pico Triboro Bridge pedal, illustrating the layout of the VOL, GAIN, BASS/GATE, TREBLE/TONE knobs, and the TYPE button.

4. Drive Modes Explained

The Pico Triboro Bridge offers three distinct drive modes, each with its unique sonic characteristics:

• Overdrive Mode (Green LED): This mode provides a gain spectrum ranging from low to mid-level saturation with an open voicing. It is ideal for use as a subtle "always-on" drive, adding warmth and grit, or as a solo boost to push your ampජීවිතාරක්ෂකයා.
• Distortion Mode (Orange LED): Engaging this mode provides additional gain-staging, delivering tones from crunchy rhythms to fully saturated leads. It offers a more aggressive and compressed sound compared to the Overdrive mode.
• Fuzz Mode (Red LED): This mode transforms the pedal into a high-gain fuzz effect with over-the-top saturation. The BASS knob becomes a GATE control, and the TREBLE knob becomes a Low Pass Filter, allowing for unique and extreme tonal variations specific to fuzz.

5. පිරිවිතර

6. නඩත්තු කිරීම

To ensure the longevity and optimal performance of your Pico Triboro Bridge pedal, follow these maintenance guidelines:

• පිරිසිදු කිරීම: Use a soft, dry cloth to clean the pedal's exterior. Avoid abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
• ගබඩා: Store the pedal in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity when not in use.
• සම්බන්ධතා: වරින් වර සියලුම කේබල් සම්බන්ධතා ගෙවී යාම සහ ඉරී යාම සඳහා පරීක්ෂා කරන්න. ජැක් දූවිලි හා සුන්බුන් වලින් තොර බවට වග බලා ගන්න.
• බල සැපයුම: Always use the recommended 9V DC center-negative power adapter. Using an incorrect power supply can damage the unit and void the warranty.

7. දෝශ නිරාකරණය

If you encounter issues with your Pico Triboro Bridge pedal, refer to the following common troubleshooting steps:

• ශබ්දයක් නැත:
  • Check all cable connections (instrument to input, output to amp).
  • Ensure the power adapter is correctly connected and functioning.
  • ඔබගේ උපකරණය සහ amplifier නිවැරදිව වැඩ කරයි.
  • Check the pedal's bypass status; if it's true bypass, sound should pass even if the pedal is off.
• Weak or Distorted Sound (unexpectedly):
  • Check the GAIN and VOL knob settings.
  • Ensure the correct drive mode (Overdrive, Distortion, Fuzz) is selected for your desired sound.
  • If in Fuzz mode, adjust the GATE and TONE (Low Pass Filter) knobs, as extreme settings can significantly alter the sound.
  • Test with different cables and power supplies to rule out faulty accessories.
• අධික ශබ්දය/හම්:
  • Ensure you are using a regulated, isolated power supply.
  • If in Fuzz mode, adjust the GATE knob to reduce unwanted noise.
  • ඔබේ සැකසුමෙහි බිම් ලූප තිබේදැයි පරීක්ෂා කරන්න.
  • බල ට්‍රාන්ස්ෆෝමර් හෝ වෙනත් විද්‍යුත් චුම්භක බාධා ප්‍රභවයන්ගෙන් පැඩලය ඉවතට ගෙන යන්න.

8. වගකීම් සහ සහාය

Electro-Harmonix products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official Electro-Harmonix webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුවට සම්බන්ධ වන්න. වගකීම් හිමිකම් සඳහා මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

වැඩිදුර සහාය සඳහා කරුණාකර පිවිසෙන්න: www.ehx.com