BINGFU BFN00932

Bingfu Vehicle Mobile Ham Radio Antenna User Manual

ආකෘතිය: BFN00932 | වෙළඳ නාමය: බිංෆු

1. හැඳින්වීම

This manual provides essential information for the proper installation, operation, and maintenance of your Bingfu Vehicle Mobile Ham Radio Antenna. This dual-band antenna is designed for VHF (136-174MHz) and UHF (400-470MHz) frequencies, featuring a strong magnetic base for vehicle mounting and a soft whip design. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. පැකේජ අන්තර්ගතය

පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයේ ඇති බව තහවුරු කරගන්න:

Complete Bingfu Ham Radio Antenna Kit with all components

රූපය 2.1: Complete antenna kit including the whip antenna, magnetic base, cable, adapters, ground planes, and hex tool.

3. නිෂ්පාදන ලක්ෂණ

Diagram showing antenna dimensions, flexible whip, and low loss RG58 cable

රූපය 3.1: Antenna dimensions and cable type. The antenna whip is flexible, and the cable is a low-loss RG58 type.

Close-up of the magnetic base with silicone gasket and strong magnet

රූපය 3.2: Details of the magnetic base, highlighting its strong magnetic hold and the protective silicone rubber gasket.

4. සැකසුම සහ ස්ථාපනය

4.1. Ground Plane Assembly

  1. Identify the central connector for the ground planes.
  2. Select the appropriate ground plane rods based on your operating frequency:
    • භාවිතා කරන්න short ground planes (9.5cm/3.74inch) for optimal performance on UHF (400-470MHz).
    • භාවිතා කරන්න long ground planes (15cm/5.9inch) for optimal performance on VHF (136-174MHz).
  3. Carefully screw the three selected ground plane rods into the designated ports on the central connector. Ensure they are finger-tight.
Ground plane kit components and assembly

රූපය 4.1: Ground plane kit showing the central connector and both short and long ground plane rods.

Diagram showing lengths of short and long ground planes for UHF and VHF

රූපය 4.2: Comparison of short (UHF) and long (VHF) ground plane rod lengths.

4.2. ඇන්ටෙනා එකලස් කිරීම

  1. Screw the assembled ground plane unit onto the base of the antenna whip.
  2. Attach the antenna whip assembly to the magnetic base. Ensure a secure connection.

4.3. Vehicle Mounting

  1. Choose a flat, metallic surface on your vehicle, such as the roof or trunk lid, that is free from obstructions and provides a clear line of sight.
  2. Clean the chosen surface thoroughly to ensure maximum magnetic adhesion and to prevent scratching.
  3. Place the magnetic base firmly onto the cleaned metallic surface. The strong magnet will secure the antenna. The silicone gasket on the base helps protect your vehicle's paint.
  4. Route the 5m (16.4ft) RG58/U coaxial cable carefully to your radio, avoiding sharp bends, pinching, or interference with doors or windows.
Red truck with antenna mounted on the roof, illustrating easy installation

රූපය 4.3: Example of antenna placement on a vehicle roof for optimal signal.

4.4. Connecting to Your Radio

  1. The antenna cable terminates with a UHF PL259 Male Connector.
  2. If your radio has a UHF SO239 Female port, connect the PL259 Male connector directly.
  3. If your radio requires an SMA Female connection (common on handheld radios), use the provided SO239 to SMA Female Adapter. First, connect the PL259 Male to the SO239 side of the adapter, then connect the SMA Female side to your radio.
  4. Ensure all connections are tight to prevent signal loss.
Diagram showing SMA Male and PL259 Male connectors and their female counterparts on a radio

රූපය 4.4: Connector types and adapters for connecting the antenna to various mobile ham radios.

5. මෙහෙයුම

Once installed and connected, your Bingfu antenna is ready for use. Ensure your radio is set to the correct frequency band (VHF or UHF) corresponding to the ground planes you have installed for optimal performance.

Person speaking into a ham radio with the antenna mounted on a vehicle, indicating clear communication

රූපය 5.1: The antenna facilitates clear communication for mobile radio users.

6. නඩත්තු කිරීම

7. දෝශ නිරාකරණය

ගැටලුවවිය හැකි හේතුවවිසඳුම
Weak signal reception or transmission.
  • Incorrect ground plane rods installed for the frequency band.
  • ලිහිල් හෝ විඛාදන සම්බන්ධතා.
  • Antenna not properly grounded (e.g., mounted on non-metallic surface).
  • High SWR.
  • Obstructions blocking signal.
  • Ensure correct ground planes are used (short for UHF, long for VHF).
  • Check all cable connections for tightness and cleanliness.
  • Mount antenna on a large metallic surface (vehicle roof/trunk).
  • Check SWR with a meter and adjust if necessary.
  • ඇන්ටෙනාව පැහැදිලි ප්‍රදේශයකට ගෙන යන්න.
Antenna falls off vehicle.
  • Insufficient magnetic adhesion.
  • Vehicle surface is dirty or uneven.
  • Excessive speed or strong winds.
  • සවි කරන මතුපිට හොඳින් පිරිසිදු කරන්න.
  • Ensure the magnetic base is fully in contact with a flat metallic surface.
  • Reduce speed in high wind conditions.
Cable damage or wear.
  • Cable pinched by door/window.
  • Exposure to sharp edges or excessive friction.
  • Reroute cable to avoid pinching points.
  • Inspect cable regularly and replace if damaged.

8. පිරිවිතර

විශේෂාංගයවිස්තර
ආදර්ශ අංකයBFN00932
සංඛ්යාත පරාසයVHF: 136-174MHz, UHF: 400-470MHz
ඇන්ටෙනා වර්ගයDual Band Mobile Ham Radio Antenna with Ground Planes
ඇන්ටෙනා දිගApproximately 42cm (16.53 inches) whip, 48.5cm (19.1 inches) total with base
Magnetic Base Diameter9cm (අඟල් 3.55)
කේබල් වර්ගයRG58/U Coaxial Cable
කේබල් දිගමීටර් 5 (අඩි 16.4)
සම්බන්ධක වර්ගයUHF PL259 Male
සම්බාධනය50 ඕම්
වර්ණයකළු
අයිතමයේ බරරාත්තල් 1.76 කි
නිෂ්පාදන මානයන් (L x W x H)16.93 x 5.12 x 2.56 අඟල් (ඇසුරුම් කර ඇත)

9 ආරක්ෂිත තොරතුරු

10. වගකීම් සහ සහාය

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Bingfu customer service directly. Keep your purchase receipt as proof of purchase.

නිෂ්පාදකයා: Bingfu

ASIN: B0CLKLHHNP

අදාළ ලියකියවිලි - BFN00932

පෙරview Bingfu RF සම්බන්ධක භාවිත මාර්ගෝපදේශ
ප්‍රශස්ත ක්‍රියාකාරිත්වය සහ කල්පැවැත්ම සහතික කිරීම සඳහා Bingfu RF සම්බන්ධක නිසි ලෙස ස්ථාපනය කිරීම සහ භාවිතය සඳහා සංක්ෂිප්ත මාර්ගෝපදේශ.
පෙරview Bingfu Antenna Usage Tips and Best Practices
Essential tips for proper installation, maintenance, and usage of Bingfu antennas to ensure optimal performance and compliance with regulations. Covers interference, power output, and environmental factors.
පෙරview GPS/GNSS මූලික ස්ථානය / ESP32 සහ UM980 සහිත ග්‍රාහක සැකසුම - Budget DIY
ESP32 ක්ෂුද්‍ර පාලකය සහ Unicorecomm UM980 මොඩියුලය භාවිතයෙන් පිරිවැය-ඵලදායී DIY GPS/GNSS මූලික ස්ථානයක් හෝ ග්‍රාහකයක් ගොඩනගන්නේ කෙසේදැයි ඉගෙන ගන්න. මෙම මාර්ගෝපදේශය අභිරුචි ඉහළ නිරවද්‍යතා ස්ථාන පද්ධතියක් නිර්මාණය කිරීම සඳහා දෘඩාංග, ස්ථිරාංග සහ වින්‍යාසය ආවරණය කරයි.
පෙරview Produktliste und Preise für Elektronik und Zubehör
Umfassende Liste von Elektronikprodukten und Zubehör mit Detaillierten Preisinformationen. Entdecken Sie eine breite Palette von Marken und Artikeln, von Kopfhörern und Lautsprechern bis hin zu Computern und Mobiltelefonzubehör.