XPG Core Reactor II Power Supply User Manual

1. හැඳින්වීම

The XPG Core Reactor II Power Supply is a high-performance component designed to provide stable and efficient power to your computer system. With 750W of power and 80 Plus Gold certification, it ensures high energy efficiency. Its Full Modular design simplifies installation and cable management. The Active PFC (Power Factor Correction) feature further enhances overall system performance by delivering consistent and reliable power, crucial for demanding PC operations.

2 ආරක්ෂිත තොරතුරු

Please read and understand all safety instructions before installing or operating the power supply. Failure to do so may result in personal injury or damage to the product or other components.

• විදුලි ආරක්ෂාව: Always disconnect the power cord from the wall outlet before installing, removing, or cleaning the power supply. Ensure your hands are dry when handling electrical components.
• නිසි පදනම: Ensure your computer system and the power outlet are properly grounded to prevent electrical shock.
• වාතාශ්රය: Do not block the ventilation openings of the power supply. Ensure adequate airflow around the unit to prevent overheating.
• පරිසරය: Operate the power supply in a dry, well-ventilated environment. Avoid exposure to moisture, dust, and extreme temperatures.
• හැසිරවීම: Handle the power supply with care. Avoid dropping or subjecting it to strong impacts.
• බලයලත් සේවාව: Do not attempt to open or repair the power supply yourself. Refer all servicing to qualified service personnel. Opening the unit will void the warranty.

3. පැකේජ අන්තර්ගතය

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your retailer or XPG support.

• XPG Core Reactor II Power Supply Unit
• Modular Cable Set (including ATX 24-pin, EPS/CPU 4+4-pin, PCIe 6+2-pin, SATA, and Peripheral cables)
• AC විදුලි රැහැන
• සවිකරන ඉස්කුරුප්පු
• පරිශීලක අත්පොත (මෙම ලේඛනය)

Image: The XPG Core Reactor II Power Supply unit, showcasing its black finish, fan grille, and modular cable ports. The image also implies the presence of various modular cables for system connection.

4. පිහිටුවීම සහ ස්ථාපනය

Follow these steps to properly install your XPG Core Reactor II Power Supply into your computer system.

1. ඔබේ පද්ධතිය සූදානම් කරන්න: ඔබේ පරිගණකය සම්පූර්ණයෙන්ම විදුලිය විසන්ධි කර බිත්ති අලෙවිසැලෙන් විසන්ධි කර ඇති බවට වග බලා ගන්න. ඔබේ පරිගණක කවරය විවෘත කරන්න.
2. පැරණි බල සැපයුම ඉවත් කරන්න (අදාළ නම්): Disconnect all cables from your old power supply and remove its mounting screws. Carefully slide it out of the case.
3. Mount the New Power Supply: Position the XPG Core Reactor II Power Supply in the designated PSU bay of your computer case. Ensure the fan is oriented correctly (typically facing downwards or upwards depending on case design and ventilation). Secure it with the provided mounting screws.
4. මොඩියුලර් කේබල් සම්බන්ධ කරන්න: Due to its full modular design, you only need to connect the cables required for your components.
   • මවු පුවරුවේ බලය: Connect the 24-pin ATX cable to the corresponding port on the power supply and the motherboard.
   • CPU බලය: Connect the 4+4-pin EPS/CPU cable to the power supply and the CPU power connector(s) on your motherboard.
   • ග්‍රැෆික් කාඩ් බලය: Connect the 6+2-pin PCIe cables to the power supply and your graphics card(s). Use separate cables for each connector on high-power GPUs if possible.
   • SATA උපාංග: Connect SATA power cables to your SSDs, HDDs, and optical drives.
   • පර්යන්ත උපාංග: Connect peripheral (Molex) cables for case fans or other accessories as needed.
5. කේබල් කළමනාකරණය: ඔබේ නඩුව තුළ වායු ප්‍රවාහය සහ සෞන්දර්යය වැඩි දියුණු කිරීම සඳහා කේබල් පිළිවෙලට මාර්ගගත කරන්න.
6. නඩුව වසා බලය සම්බන්ධ කරන්න: Once all connections are secure, close your computer case. Connect the AC power cord to the power supply and then to a wall outlet.

5. මෙහෙයුම් උපදෙස්

Operating the XPG Core Reactor II Power Supply is straightforward once installed.

• බල ගැන්වීම: Ensure the power switch on the back of the power supply (next to the AC inlet) is in the 'I' (On) position. Then, power on your computer using the case's power button.
• කාර්යක්ෂමතාව: The 80 Plus Gold certification indicates high energy efficiency, meaning less wasted heat and lower electricity consumption compared to less efficient power supplies.
• Active PFC: The Active Power Factor Correction feature automatically adjusts the input current waveform to improve the power factor, leading to more stable and cleaner power delivery to your components.
• විදුලිය විසන්ධි කිරීම: To shut down your system, use the operating system's shutdown function. For complete power disconnection, switch the power supply's switch to the 'O' (Off) position and unplug the AC power cord.

6. නඩත්තු කිරීම

Regular maintenance helps ensure the longevity and optimal performance of your power supply.

• දූවිලි ඉවත් කිරීම: Periodically (e.g., every 3-6 months), power off and unplug your computer. Use compressed air to gently blow dust out of the power supply's fan grille and ventilation openings. Hold the fan blades to prevent them from spinning rapidly during cleaning, which can damage the bearings.
• කේබල් පරීක්ෂාව: Occasionally check all connected modular cables to ensure they are securely seated and free from damage.
• පාරිසරික පරීක්ෂාව: Ensure the operating environment remains clean, dry, and within recommended temperature ranges.

7. දෝශ නිරාකරණය

If you encounter issues with your XPG Core Reactor II Power Supply, refer to the following common troubleshooting steps:

If the problem persists after trying these steps, please contact XPG customer support for further assistance.

8. පිරිවිතර

9. වගකීම් සහ සහාය

For warranty information, technical support, or service inquiries regarding your XPG Core Reactor II Power Supply, please visit the official XPG webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සහාය කෙලින්ම අමතන්න.

You can also visit the official XPG Store on Amazon for product information and support resources:

Visit the XPG Store on Amazon