TC ඉලෙක්ට්‍රොනික JIMS 800 PREAMP ගිටාර් පැඩලය

1. හැඳින්වීම

The TC Electronic JIMS 800 PREAMP is a twin-channel guitar preamp pedal designed to deliver classic, guitar-driven rock tones. Utilizing advanced TC Ampworx component-based modeling technology, this compact pedal encapsulates the sound and feel of an iconic 80s guitar amplifier. It features independent channel controls, pre/post boost functionality, and dedicated outputs for DI and headphones, offering versatile usage for practice, recording, and live performance.

2 ආරක්ෂිත තොරතුරු

• Always use a regulated 9V DC power supply with a center-negative polarity and a minimum current rating of 300mA. Incorrect power supplies can damage the unit and void the warranty.
• Do not expose the pedal to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the pedal to severe impacts.
• Do not attempt to open the enclosure or modify the internal circuitry. Refer all servicing to qualified personnel.
• Ensure proper ventilation around the pedal during operation.

3. පැකේජ අන්තර්ගතය

Your TC Electronic JIMS 800 PREAMP package should contain the following:

• JIMS 800 පෙරAMP ගිටාර් පැඩලය
• ඉක්මන් ආරම්භක මාර්ගෝපදේශය (ඇතුළත් කර ඇත්නම්)

Note: A power supply is not included and must be purchased separately.

4. නිෂ්පාදන ලක්ෂණ

• Twin-Channel Preamp: Offers two distinct channels for versatile tonal options.
• Independent Channel Controls: Each channel features dedicated controls for precise tone shaping.
• Pre/Post Boost: Provides an added gain boost that can be applied before or after the preamp කොටස.
• Dedicated Outputs: Includes outputs for DI (Direct Injection) and headphones for flexible connectivity.
• Treble Bleed Circuit: Smooths out sharp tones for a more pleasant listening experience.
• Authentic Cab Simulation: Features precise convolution-based IR technology for a classic G12-65 4x12 cab speaker sound.
• Versatile Tonestack: Combines the iconic tone control layout of the original amp with modern versatility.
• Added Gain Power: A subtle additional gain boost on the second channel pushes your sound without compromising the original amp's feel.

5. පාලන සහ සම්බන්ධතා

රූපය 1: ඉදිරිපස පැනල පාලන

• GAIN Knob: Adjusts the input gain and distortion level of the selected channel.
• බූස්ට් බොත්තම: Controls the level of the independent boost function.
• මට්ටමේ බොත්තම: Sets the overall output volume of the pedal.
• BASS බොත්තම: Adjusts the low-frequency response of the tone.
• මැද බොත්තම: Adjusts the mid-range frequency response of the tone.
• TREBLE Knob: Adjusts the high-frequency response of the tone.
• බූස්ට් පා මාරුව: Activates or deactivates the boost function. An LED indicates its status.
• CHANNEL Footswitch: Switches between the two preamp channels. An LED indicates the active channel.
• දුරකථන ජැක්: 3.5mm stereo output for headphones, featuring cab simulation.

රූපය 2: පසුපස පැනල් සම්බන්ධතා

• ජැක් තුළ: 1/4" mono input for your guitar.
• පිටත ජැක්: 1/4" mono output to your ampලයිෆයර් හෝ වෙනත් පැඩල්.
• DI Jack: XLR output for direct connection to a mixing desk or audio interface, with cab simulation.
• Presence knob: Adjusts the high-frequency contour, adding clarity or bite.
• PRE/POST Switch: Determines whether the boost is applied before (PRE) or after (POST) the preamp කොටස.
• 9V DC ආදානය: Power input for a 9V DC, center-negative power supply (300mA minimum).
• USB Port: USB 2.0 Type B port for firmware updates and potential future functionalities.

6. පිහිටුවීම

1. බල සම්බන්ධතාවය: Connect a 9V DC, center-negative power supply (minimum 300mA) to the 9V DC input jack on the rear panel.
2. ගිටාර් සම්බන්ධතාවය: Connect your guitar to the 'IN' jack on the rear panel using a standard 1/4" instrument cable.
3. ප්රතිදාන සම්බන්ධතාවය:
   • For connection to a guitar amplifier, connect the 'OUT' jack to your amp's input.
   • For direct recording or live sound, connect the 'DI' XLR output to a mixing console or audio interface. This output includes cab simulation.
   • For silent practice, connect headphones to the 'PHONES' 3.5mm stereo jack. This output also includes cab simulation.
4. මූලික සැකසුම්: Before powering on, set all knobs (GAIN, BOOST, LEVEL, BASS, MID, TREBLE, PRESENCE) to their 12 o'clock (noon) position. Ensure the PRE/POST switch is set to your desired boost placement.

7. මෙහෙයුම් උපදෙස්

7.1 නාලිකා මාරු කිරීම

ඔබන්න නාලිකාව footswitch to toggle between the two distinct preamp channels. The corresponding LED will illuminate to indicate the active channel.

7.2 Gain and Level Adjustment

• භාවිතා කරන්න ලාභය knob to control the amount of overdrive and distortion for the selected channel. Higher settings will yield more saturated tones.
• සකස් කරන්න මට්ටම knob to set the overall output volume of the pedal. Ensure the output level is appropriate for your ampජීවිත කාලය හෝ පටිගත කිරීමේ උපකරණය.

7.3 Tone Shaping (EQ)

The JIMS 800 PREAMP features a versatile 3-band EQ:

• බාස්: Controls the low-end frequencies, adding warmth or tightness.
• MID: Adjusts the mid-range frequencies, affecting the presence and punch of your tone.
• උත්සන්න: Controls the high-end frequencies, adding brightness or smoothness.
• පැවැත්ම: (Rear Panel) Fine-tunes the very high frequencies, adding sparkle or cutting harshness.

7.4 Boost Function

• භාවිතා කරන්න බූස්ට් knob to set the desired amount of boost.
• ඔබන්න බූස්ට් footswitch to engage or disengage the boost.
• ද පෙර/තැපැල් switch on the rear panel determines where the boost is applied in the signal chain. 'PRE' applies the boost before the preamp, increasing saturation. 'POST' applies the boost after the preamp, primarily increasing පරිමාව.

7.5 Cab Simulation

The DI and PHONES outputs feature an authentic G12-65 4x12 cab simulation, providing a studio-quality speaker cabinet sound directly from the pedal. This is ideal for recording or connecting directly to a PA system without needing a physical amplifier or cabinet.

8. නඩත්තු කිරීම

• පිරිසිදු කිරීම: පැඩලයේ බාහිර කොටස පිරිසිදු කිරීම සඳහා මෘදු වියළි රෙද්දක් භාවිතා කරන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක භාවිතා නොකරන්න.
• ගබඩා: දිගු කාලයක් භාවිතයේ නොමැති විට, සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක පැඩලය ගබඩා කරන්න.
• ස්ථිරාංග යාවත්කාලීන කිරීම්: වරින් වර TC ඉලෙක්ට්‍රොනික උපකරණ පරීක්ෂා කරන්න. website for any available firmware updates for your JIMS 800 PREAMP via the USB port.

9. දෝශ නිරාකරණය

• ශබ්දයක් නැත:
  • බල සැපයුම නිවැරදිව සම්බන්ධ වී ක්‍රියාත්මක වන බවට වග බලා ගන්න.
  • නිසි සම්බන්ධතාවය සහ අඛණ්ඩතාව සඳහා සියලුම උපකරණ කේබල් පරීක්ෂා කරන්න.
  • Verify the LEVEL knob is not set to minimum.
  • If using DI or headphones, ensure the receiving device (mixer, interface, headphones) is properly connected and its volume is up.
• Poor Tone/Unwanted Noise:
  • Check your guitar's pickups and wiring.
  • Experiment with the GAIN and EQ (BASS, MID, TREBLE, PRESENCE) settings.
  • Ensure you are using a clean, regulated power supply. Unregulated or noisy power supplies can introduce hum.
  • දෝෂ සහිත සම්බන්ධතා බැහැර කිරීම සඳහා විවිධ කේබල් සමඟ පරීක්ෂා කරන්න.
• Boost Function Not Working:
  • Ensure the BOOST knob is turned up from minimum.
  • Check the BOOST footswitch LED to confirm it's engaged.

10. පිරිවිතර

11. වගකීම් සහ සහාය

TC Electronic products are designed for reliability and performance. For information regarding warranty coverage, technical support, and service, please visit the official TC Electronic webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සහාය සෘජුවම අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

Official TC Electronic Webඅඩවිය: www.tcelectronic.com