Avenli 4-Person Inflatable Square Spa User Manual

1. හැඳින්වීම

Thank you for choosing the Avenli 4-Person Inflatable Square Spa. This manual provides essential information for the safe and efficient use of your new spa. Please read all instructions carefully before setup and operation to ensure proper functionality and to prevent injury.

This inflatable spa offers a relaxing experience with a capacity for up to 4 people, heating water to a maximum of 104°F (40°C). Its portable design allows for quick setup and easy storage, making it ideal for various outdoor settings.

Figure 1.1: The Avenli Inflatable Square Spa in an outdoor setting.

2 ආරක්ෂිත තොරතුරු

අවවාදයයි: මෙම ආරක්ෂක උපදෙස් පිළිපැදීමට අපොහොසත් වීමෙන් බරපතල තුවාල හෝ මරණය සිදුවිය හැකිය.

• Always supervise children around the spa.
• Do not use the spa if the water temperature exceeds 104°F (40°C).
• Consult a physician before use if you are pregnant, have health conditions, or are on medication.
• දැඩි ව්‍යායාමයෙන් පසු වහාම ස්පා භාවිතා කිරීමෙන් වළකින්න.
• Do not consume alcohol or drugs before or during spa use.
• Ensure the spa is placed on a flat, level surface capable of supporting the spa's weight when filled (approximately 1,200 pounds / 544 kg) and occupants.
• Always connect the spa to a grounded outlet protected by a Ground Fault Circuit Interrupter (GFCI).
• Do not operate the spa in temperatures below 39°F (4°C).
• Keep all electrical components dry and away from water.

3. පැකේජ අන්තර්ගතය

පහත ලැයිස්තුගත කර ඇති සියලුම සංරචක ඔබේ පැකේජයේ ඇති බව තහවුරු කරගන්න:

Figure 3.1: All included components for the Avenli Inflatable Square Spa.

• Spa Liner
• පොම්ප ඒකකය
• ඉහළ කවරය
• බිම් රෙදි
• GFCI (බිම් දෝෂ පරිපථ බාධාව)
• වායු කපාටය
• Inflating Hose
• Pump Unit Connectors (3)
• කැප් (2)
• අලුත්වැඩියා කට්ටලය
• ෆිල්ටර් කාට්රිජ්
• Filtration Cartridge Support

4. පිහිටුවීම

The Avenli Inflatable Square Spa is designed for quick and easy setup, typically taking less than 10 minutes for initial inflation.

4.1 අඩවි සකස් කිරීම

• Choose a flat, level surface free of sharp objects or debris.
• Ensure the chosen location can support the weight of the filled spa and its occupants (approximately 1,200 lbs / 544 kg).
• Place the ground cloth on the prepared surface.

4.2 උද්ධමනය

• Unfold the spa liner onto the ground cloth.
• Connect the inflating hose to the pump unit and the spa's air valve.
• Plug in the pump unit and activate the inflation function. Inflate until the spa walls are firm to the touch but not over-inflated.
• Disconnect the hose and securely close the air valve.

Figure 4.1: The Avenli Inflatable Square Spa fully inflated with the pump unit connected.

4.3 Water Filling and Pump Connection

• Fill the spa with water to the recommended fill line (approximately 148 gallons / 560 liters).
• Connect the pump unit to the spa's water inlet and outlet using the provided connectors. Ensure all connections are tight to prevent leaks.
• Plug the GFCI-protected power cord into a suitable electrical outlet (110-120V, 60Hz).

5. මෙහෙයුම් උපදෙස්

The spa's functions are controlled via the intuitive LED display on the pump unit.

Figure 5.1: Avenli Spa LED Control Panel.

5.1 පාලන පැනල් කාර්යයන්

• නායකත්වය විදහා: Shows current water temperature and settings.
• උෂ්ණත්වය වැඩිවීම/අඩුකිරීම් බොත්තම්: Adjust the desired water temperature. The maximum temperature is 104°F (40°C).
• තාප බොත්තම: Activates the heating system. The heater will maintain the set temperature.
• සම්බාහන බොත්තම: Activates the air jet massage system.
• Filtration Button: Controls the water filtration system.
• අගුළු බොත්තම: අහම්බෙන් සිදුවන වෙනස්කම් වැළැක්වීම සඳහා පාලක පැනලය අගුළු දමයි හෝ අගුළු හරියි.
• Temperature Units Selector: Toggles between Celsius (°C) and Fahrenheit (°F).

5.2 Heating the Water

Press the Heat Button to begin heating the water. The LED display will show the current water temperature. Once the desired temperature is reached, the heater will automatically turn off and on as needed to maintain it.

5.3 Activating Massage Jets

Press the Massage Button to activate the soothing air jets. Press again to turn them off.

Figure 5.2: The spa with active massage jets creating bubbles.

6. නඩත්තු කිරීම

Regular maintenance is crucial for the longevity and hygiene of your spa.

6.1 Water Filtration and Cleaning

• Regularly check and clean the filter cartridge. Replace it every few weeks or when visibly dirty.
• Maintain proper water chemistry using appropriate spa chemicals (not included).
• Clean the spa liner periodically with a soft cloth and mild cleaner.

6.2 ජලාපවහනය සහ ගබඩා කිරීම

• To drain the spa, use the convenient bottom drain plug. Ensure water is directed away from electrical components and property.
• Once drained, thoroughly dry the spa liner and pump unit.
• Deflate the spa completely for compact storage.
• When not in use, cover the spa with the included all-weather resistant cover to protect it from debris and UV exposure.

Figure 6.1: The spa covered with its all-weather resistant cover.

7. දෝශ නිරාකරණය

This section addresses common issues you might encounter with your Avenli spa.

If issues persist after attempting these solutions, please contact Avenli customer support.

8. පිරිවිතර

Detailed specifications for the Avenli 4-Person Inflatable Square Spa:

Figure 8.1: Key dimensions of the Avenli Inflatable Square Spa.

9. වගකීම් සහ සහාය

For warranty information, technical support, or to purchase replacement parts, please contact Avenli customer service directly. Refer to the contact information provided with your product packaging or visit the official Avenli webඅඩවිය.

Please have your model number (WSL17606US) and purchase date available when contacting support.