XBrand 3-Tier Water Fountain (Model HD400) Instruction Manual

1. හැඳින්වීම

Thank you for choosing the XBrand 3-Tier Water Fountain, Model HD400. This elegant freestanding water feature is designed to enhance your outdoor living space with the soothing sounds of flowing water. Constructed from durable fiber resin, this 51-inch tall fountain features a classic design with a pineapple top and an integrated auto shut-off pump for convenience and safety. This manual provides essential information for the proper setup, operation, and care of your new fountain.

Figure 1: The XBrand 3-Tier Water Fountain in brown, showcasing its design and water flow.

2 ආරක්ෂිත තොරතුරු

Please read and understand all safety instructions before installing and operating your fountain. Failure to follow these instructions may result in electric shock, injury, or property damage.

• විදුලි ආරක්ෂාව: Ensure the fountain is connected to a properly grounded outlet. Do not modify the plug or use an adapter. Keep the electrical cord and connections dry. Disconnect power before performing any maintenance or cleaning.
• ජල සුරක්ෂිතතාව: Use clean, fresh water. Do not allow children or pets to play with or drink from the fountain.
• ස්ථානගත කිරීම: Place the fountain on a stable, level surface to prevent tipping and ensure proper water flow. Avoid placing it near electrical outlets or other sensitive equipment where splashing could cause damage.
• හැසිරවීම: The fountain is made of fiber resin. Handle with care during assembly and relocation to prevent damage.
• මෙහෙයුම: Never operate the pump without sufficient water, as this can damage the pump. The auto shut-off feature is a safety measure, but regular water level checks are recommended.

3. පැකේජ අන්තර්ගතය

Carefully unpack all components and inspect them for any damage. If any parts are missing or damaged, please contact XBrand customer support.

• Fountain Body (Base, Middle Tier, Top Tier with Pineapple Finial)
• Water Pump with Auto Shut-Off Sensor
• හෝස්
• Electrical Cord with Adapter

රූපය 2: පුපුරා ගියේය view diagram showing the fountain's main components: hose, auto-shut-off pump, water tank, and electrical cord with adapter.

4. එකලස් කිරීම සහ සැකසීම

Follow these steps to assemble and set up your XBrand 3-Tier Water Fountain:

1. ස්ථානය තෝරන්න: Select a level, stable outdoor location for your fountain, ensuring it is within reach of a grounded electrical outlet.
2. Assemble Tiers: Carefully stack the fountain tiers, starting with the largest base, then the middle tier, and finally the top tier with the pineapple finial. Ensure they are securely seated.
3. පොම්පය සම්බන්ධ කරන්න: Attach the provided hose to the outlet of the water pump.
4. ස්ථාන පොම්පය: Place the pump inside the water tank located in the lowest basin of the fountain. Route the electrical cord out of the fountain through the designated opening, ensuring it does not interfere with water flow or stability.
5. ජලය පුරවන්න: පහළම b පුරවන්න.asin of the fountain with clean, distilled water until the pump is fully submerged. Do not overfill.
6. සම්බන්ධක බලය: Plug the electrical cord into a grounded outdoor outlet. The pump will begin circulating water, and the fountain will start flowing.

Figure 3: The auto shut-off pump and easy-to-connect electrical plug for simple setup.

5. මෙහෙයුම් උපදෙස්

Once assembled and filled with water, operating your fountain is straightforward:

• Starting the Fountain: Plug the electrical cord into a grounded outlet. The pump will activate, and water will begin to flow through the tiers.
• ජල මට්ටම: පහළම b හි ජල මට්ටම නිතිපතා පරීක්ෂා කරන්න.asin. Due to evaporation and splashing, water levels will decrease over time. Refill as needed to ensure the pump remains fully submerged.
• ස්වයංක්‍රීයව වසා දැමීමේ විශේෂාංගය: The integrated pump includes an auto shut-off sensor. If the water level drops too low, the pump will automatically turn off to prevent damage. If this occurs, unplug the fountain, refill with water, and then plug it back in to resume operation.
• ප්‍රවාහය සකස් කිරීම: Some pumps may have an adjustable flow rate switch. If present, adjust to your desired water flow.

රූපය 4: සමීප රූපය view of the pineapple top tier of the XBrand water fountain, with water gently cascading.

6. නඩත්තු කිරීම

Regular maintenance will ensure the longevity and optimal performance of your fountain.

• දිනපතා/සතිපතා: ජල මට්ටම පරීක්ෂා කර අවශ්‍ය පරිදි නැවත පුරවන්න.
• මාසිකව: Disconnect power. Drain old water and clean the fountain basins with warm water and a soft cloth to remove any algae, dirt, or mineral deposits. Avoid harsh chemicals. Refill with clean water.
• පොම්ප පිරිසිදු කිරීම: Periodically clean the pump impeller and intake screen to prevent blockages and maintain efficient water flow. Refer to the pump's specific instructions for detailed cleaning.
• ශීත ඍතුකරණය: In areas with freezing temperatures, drain all water from the fountain and pump. Clean the fountain thoroughly and store it indoors in a dry, protected area to prevent damage from ice expansion.

රූපය 5: සවිස්තරාත්මක view of water flowing into one of the basins of the XBrand 3-Tier Water Fountain.

7. දෝශ නිරාකරණය

ඔබේ ෆවුන්ටන් එක සමඟ ගැටළු ඇති වුවහොත්, පහත සඳහන් පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:

8. පිරිවිතර

• ආකෘතිය: HD400
• වෙළඳ නාමය: එක්ස්බ්‍රෑන්ඩ්
• ද්රව්ය: Fiber Resin
• වර්ණය: දුඹුරු
• නිෂ්පාදන මානයන්: 22.8"අඟල් x 22.8"අඟල් x 51"උ
• අයිතමයේ බර: පවුම් 32ක්
• බලශක්ති ප්රභවය: විදුලි (රැහැන්ගත)
• පොම්ප ප්රවාහ අනුපාතය: ලීටර් 450/පැ (99 GPH)
• විශේෂ ලක්ෂණය: ස්වයංක්‍රීයව වසා දැමීමේ පොම්පය
• UPC: 728990744574

Figure 6: Diagram illustrating the dimensions of the 51-inch tall XBrand 3-Tier Water Fountain.

9. වගකීම් සහ සහාය

XBrand products are manufactured with quality and durability in mind. For specific warranty information or technical support, please refer to the warranty card included with your purchase or visit the official XBrand webවෙබ් අඩවිය. ඕනෑම වගකීම් හිමිකම් පෑමක් සඳහා මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

For further assistance, please contact XBrand customer service.