හැඳින්වීම
The MAXHUB WIB10A Display Top Rack is designed to provide a stable and convenient mounting solution for various devices, including soundbars, webcams, and microphones, on top of your display. Its simple design ensures compatibility with a wide range of display types, offering a secure fit for your peripherals.
ආරක්ෂිත තොරතුරු
- Ensure the rack is securely placed on a stable display surface before attaching any devices.
- Do not overload the rack beyond its intended weight capacity.
- දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
- නිෂ්පාදිතය අධික උෂ්ණත්වයට හෝ සෘජු හිරු එළියට නිරාවරණය කිරීමෙන් වළකින්න.
- Do not attempt to modify or disassemble the rack.
පැකේජයේ අන්තර්ගතය
කරුණාකර සියලුම අයිතම පැකේජයේ තිබේදැයි පරීක්ෂා කරන්න:
- MAXHUB WIB10A Display Top Rack (1 unit)
- Instruction Manual (English, Chinese) (1 copy)
Image: The MAXHUB WIB10A Display Top Rack, a black metal frame designed to sit on top of a monitor, providing a stable platform for accessories. It features a flat top surface with cutouts and a U-shaped support leg.
සැකසුම සහ ස්ථාපනය
Follow these steps to properly set up your MAXHUB WIB10A Display Top Rack:
- Positioning the Rack: Carefully place the MAXHUB WIB10A Display Top Rack on the top edge of your display. Ensure the front lip of the rack rests securely against the front bezel of the display, and the adjustable rear support leg is extended to provide stability against the back of the display.
- ස්ථාවරත්වය සඳහා සකස් කිරීම: The rack features anti-slip processing on all contact surfaces to ensure a firm grip. Adjust the rear support leg as needed to achieve a level and stable position on your specific display model.
- උපාංග ඇමිණීම: The rack is equipped with a standard 1/4-inch screw. Align the 1/4-inch screw hole on your device (e.g., soundbar, webcam, microphone) with the screw on the rack. Tighten the screw clockwise until the device is securely fastened.
Image: A MAXHUB soundbar mounted on the display top rack. The image shows both a front view, where the soundbar sits neatly on top of the monitor, and a rear view, illustrating how the rack's support leg rests against the back of the display for stability.
රූපය: සමීප ඡායාරූපයක් view demonstrating the 1/4-inch screw mechanism on the MAXHUB display top rack. A hand is shown tightening a device onto the rack using the screw, highlighting the secure attachment method.
මෙහෙයුම් උපදෙස්
Once installed, the MAXHUB WIB10A Display Top Rack operates passively as a stable platform. Ensure any attached devices are powered on and connected according to their respective manuals.
- උපාංගය ස්ථානගත කිරීම: Place your soundbar, webcam, or microphone on the rack's platform.
- ආරක්ෂිත ඇමුණුම: Use the integrated 1/4-inch screw to firmly secure compatible devices. This prevents accidental dislodgement.
- කේබල් කළමනාකරණය: Route any cables from your attached devices neatly to avoid clutter and ensure they do not interfere with the display or other equipment.
නඩත්තු කිරීම
To ensure the longevity and proper function of your display top rack, follow these simple maintenance guidelines:
- පිරිසිදු කිරීම: Wipe the rack with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp රෙදි භාවිතා කළ හැකි අතර, වහාම වියළා ගත හැකිය. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා නොකරන්න.
- පරීක්ෂාව: Periodically check the rack for any signs of wear or damage. Ensure the anti-slip surfaces are clean and intact.
- ගබඩා: If not in use, store the rack in a cool, dry place away from direct sunlight and extreme temperatures.
දෝෂගවේෂණය
If you encounter any issues with your MAXHUB WIB10A Display Top Rack, refer to the following common problems and solutions:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Rack is unstable on the display. | Rear support leg not properly adjusted or display surface is uneven. | Adjust the rear support leg to ensure it firmly presses against the back of the display. Ensure the display is on a flat surface. |
| Device attached to the rack is loose. | 1/4-inch screw not tightened sufficiently or device is not fully compatible. | Ensure the 1/4-inch screw is fully tightened. Verify your device has a compatible 1/4-inch screw hole. |
| Anti-slip pads are not effective. | Pads are dirty or worn. | Clean the anti-slip pads with a damp cloth. If pads are worn, contact customer support for assistance. |
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | WIB10A |
| මානයන් (පළල x ගැඹුර) | 160mm x 80mm (අඟල් 6.3 x 3.15 අඟල්) |
| නිෂ්පාදන බර | ග්රෑම් 320 (රාත්තල් 0.71) |
| වර්ණය | කළු |
| සවිකරන ඉස්කුරුප්පු ඇණ | 1/4-inch standard screw |
| ද්රව්ය | Metal with anti-slip processing |
වගකීම් සහ සහාය
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official MAXHUB webඅඩවිය.
For technical support, troubleshooting assistance, or inquiries regarding replacement parts, please contact MAXHUB customer service through their official channels. Contact information can typically be found on the manufacturer's website or in the included instruction manual.
Note: The included instruction manual is available in English and Chinese.
