Instruction Manual for BlackZon Smyter MT Turbo 1/12 RTR 4WD Brushless Monster Truck

1. හැඳින්වීම

Welcome to the world of high-performance remote control vehicles with the BlackZon Smyter MT Turbo. This 1/12 scale Ready-to-Run (RTR) 4WD Brushless Monster Truck is engineered for durability, speed, and off-road capability. It features a powerful brushless motor system, robust 4WD shaft drivetrain, and independent double wishbone suspension, making it suitable for various terrains and driving styles.

ප්රධාන ලක්ෂණ:

• 4WD shaft drive Monster Truck for superior traction.
• 3S-capable Brushless System for enhanced power and speed.
• Adjustable Oil-Filled Coilover Shocks for improved handling over rough terrain.
• 4-Gear Steel Differentials Front & Rear for robust power distribution.
• Metal Driveshafts & Hex Hubs Front & Rear for increased durability.
• Independent double wishbone suspension for stable performance.
• Splashproof Electronics for protection against elements.
• 2.4GHz Radio with 2 in 1 ESC/Receiver for reliable control.
• Li-Po 7.4V 1600mAh Battery w/ T-Plug included.

Figure 1.1: The BlackZon Smyter MT Turbo 1/12 RTR 4WD Brushless Monster Truck, showcasing its robust design and vibrant green and black color scheme.

2. ආරක්ෂිත මාර්ගෝපදේශ

Operating remote control vehicles requires caution to prevent injury or damage. Please read and adhere to the following safety guidelines:

• වැඩිහිටි අධීක්ෂණය: This product is recommended for ages 3 months and up, but adult supervision is highly recommended, especially for younger users, due to the speed and power of the vehicle.
• මෙහෙයුම් පරිසරය: Operate the vehicle in open, clear areas away from people, pets, and obstacles. Avoid public roads, crowded areas, and water bodies (unless specifically designed for water use, which this model is not).
• බැටරි ආරක්ෂාව:
  • Always use the recommended Li-Po battery and charger.
  • Never overcharge or over-discharge Li-Po batteries.
  • ආරෝපණය කරන බැටරි අවධානයෙන් තොරව තබන්න එපා.
  • බැටරි සෘජු හිරු එළියෙන් සහ දැවෙන සුළු ද්‍රව්‍ය වලින් ඈත්ව සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
  • If the battery becomes swollen, punctured, or damaged, discontinue use immediately and dispose of it properly.
• චලනය වන කොටස්: Keep fingers, hair, and loose clothing away from rotating wheels and drivetrain components to prevent entanglement or injury.
• තාපය: The motor and electronic speed controller (ESC) can become hot during operation. Avoid touching them immediately after use.
• රසායනික ද්රව්ය: Keep batteries and electronic components away from children and pets. Do not ingest any parts or chemicals.
• නඩත්තු: Perform regular maintenance as described in this manual to ensure safe and optimal performance.

3. පෙට්ටියේ ඇති දේ

පැකේජය විවෘත කිරීමෙන් පසු, සියලුම සංරචක පවතින බවත් හොඳ තත්ත්වයේ පවතින බවත් තහවුරු කර ගන්න.

• BlackZon Smyter MT Turbo 1/12 RTR 4WD Brushless Monster Truck (fully assembled)
• 2.4GHz රේඩියෝ සම්ප්‍රේෂකය
• Li-Po 7.4V 1600mAh Battery with T-Plug
• Battery Charger (specific type not detailed, typically included with RTR kits)
• උපදෙස් අත්පොත (මෙම ලේඛනය)

Required to Complete (Not Included):

• 3 x AA Batteries for the transmitter (HPI Recommends #101939 Plazma AA Batteries or equivalent)

4. සංරචකය අවසන්view

Familiarize yourself with the main components of your BlackZon Smyter MT Turbo and its remote control.

4.1. Vehicle Components

රූපය 4.1: පැත්ත view of the BlackZon Smyter MT Turbo, highlighting its ground clearance and large tires.

රූපය 4.2: ඉහළ-පහළ view of the BlackZon Smyter MT Turbo chassis with the body removed, showing the internal electronics, motor, and drivetrain components.

• බුරුසු රහිත මෝටර්: ඉහළ බලයක් සහ කාර්යක්ෂමතාවයක් සපයයි.
• Electronic Speed Controller (ESC) / Receiver Unit: Controls motor speed and receives signals from the transmitter. This is a 2-in-1 unit.
• සුක්කානම් සර්වෝ: Controls the direction of the front wheels.
• බැටරි මැදිරිය: Located on the chassis, designed to securely hold the Li-Po battery.
• Oil-Filled Shocks: Provide damping for suspension, improving stability over bumps.
• Driveshafts & Differentials: Transmit power to all four wheels.
• ටයර්: Directional tractor tires for optimal grip on various surfaces.

4.2. සම්ප්‍රේෂක සංරචක

රූපය 4.3: ඉදිරිපස view of the 2.4GHz radio transmitter, showing the steering wheel and trigger.

රූපය 4.4: ඉහළ view of the 2.4GHz radio transmitter, showing the various adjustment dials and power switch.

• සුක්කානම: Controls the left and right steering of the vehicle.
• Throttle Trigger: ඉදිරියට වේගවත් කිරීමට අදින්න, තිරිංග/ආපසු හැරවීමට තල්ලු කරන්න.
• බල සැපයුම් සුවිචය: සම්ප්රේෂකය සක්රිය / අක්රිය කරයි.
• සුක්කානම් ටිම් ඩයල්: Adjusts the neutral steering position if the vehicle pulls to one side.
• Throttle Trim Dial: උදාසීන තෙරපුම් ස්ථානය සකස් කරයි.
• Dual Rate (D/R) Dial: උපරිම සුක්කානම් කෝණය සකසයි.
• බැටරි මැදිරිය: AA බැටරි 3ක් රඳවා තබා ගනී.

5. මූලික සැකසුම

Before your first drive, follow these steps to prepare your BlackZon Smyter MT Turbo.

5.1. වාහන බැටරිය ආරෝපණය කිරීම

1. Connect the included battery charger to a suitable power outlet.
2. Connect the Li-Po 7.4V 1600mAh battery to the charger. Ensure the T-Plug connection is secure.
3. Observe the charger's indicator lights (refer to charger manual if provided) to confirm charging status.
4. Once charging is complete (indicator light changes or turns off), disconnect the battery from the charger.
5. වැදගත්: Never leave charging batteries unattended. Do not overcharge.

5.2. Installing Transmitter Batteries

1. සම්ප්‍රේෂකයේ පතුලේ බැටරි මැදිරිය සොයා ගන්න.
2. ස්ලයිඩයෙන් බැටරි මැදිරියේ කවරය විවෘත කරන්න.
3. මැදිරිය තුළ දක්වා ඇති පරිදි නිවැරදි ධ්‍රැවීයතාව (+/-) සහතික කරමින් AA බැටරි 3ක් ඇතුළු කරන්න.
4. බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.

5.3. Installing Vehicle Battery

1. Remove the body clips and carefully lift the truck body off the chassis.
2. චැසිය මත බැටරි මැදිරිය සොයා ගන්න.
3. Place the charged Li-Po battery into the compartment.
4. Connect the battery's T-Plug to the corresponding T-Plug connector on the ESC/Receiver unit. Ensure a firm connection.
5. Secure the battery in place using any straps or clips provided.
6. Re-attach the truck body, securing it with the body clips.

5.4. Binding the Transmitter and Receiver

Your truck and transmitter should be pre-bound from the factory. If they lose connection or you are using a new transmitter/receiver, follow these steps to re-bind:

1. Ensure both the transmitter and vehicle are turned OFF.
2. සම්ප්රේෂකය සක්රිය කරන්න.
3. Turn ON the vehicle's power switch (on the ESC/Receiver unit).
4. The LED on the ESC/Receiver unit should indicate a successful connection (e.g., solid green light). If it blinks, refer to the ESC/Receiver manual for specific binding instructions, which usually involves pressing a bind button on the receiver while powering on.
5. Test steering and throttle response to confirm successful binding.

6. මෙහෙයුම් උපදෙස්

Once setup is complete, you are ready to operate your BlackZon Smyter MT Turbo.

6.1. වාහනය ආරම්භ කිරීම

1. Place the vehicle on a flat, clear surface.
2. Turn ON the transmitter first.
3. Turn ON the vehicle's power switch. The ESC/Receiver LED should illuminate, indicating it's ready.

6.2. රියදුරු පාලනයන්

• ඉදිරියට: Pull the throttle trigger towards the grip.
• තිරිංග: Push the throttle trigger away from the grip (from neutral position).
• ආපසු: After braking, push the throttle trigger away from the grip again to engage reverse.
• මෙහෙයවීම: Rotate the steering wheel clockwise to turn right, counter-clockwise to turn left.

6.3. Adjusting Trim and Dual Rate

• සුක්කානම් ටිම්: If the vehicle does not drive straight when the steering wheel is centered, adjust the Steering Trim dial on the transmitter until it tracks straight.
• ත්‍රොට්ල් ටිම්: If the vehicle moves slightly forward or backward when the throttle trigger is at neutral, adjust the Throttle Trim dial until it remains stationary.
• Dual Rate (D/R): This dial controls the maximum steering angle. Turn it down for less sensitive steering (good for high speeds or beginners) and up for more sensitive steering (for tighter turns).

6.4. Ending Operation

1. Turn OFF the vehicle's power switch first.
2. Turn OFF the transmitter.
3. Disconnect the battery from the vehicle and remove it for storage or charging.
4. Allow the motor and ESC to cool down before handling or storing.

7. නඩත්තු කිරීම

Regular maintenance will extend the lifespan and performance of your BlackZon Smyter MT Turbo.

• පිරිසිදු කිරීම: After each use, especially in dusty or dirty conditions, clean the vehicle. Use a soft brush or compressed air to remove dirt and debris from the chassis, suspension, and drivetrain. Avoid using water directly on electronics.
• පරීක්ෂාව: Regularly inspect for loose screws, damaged parts (e.g., bent suspension arms, cracked chassis, worn tires), and proper functioning of all moving parts.
• ධාවන පථය: Check the steel spur gear and differential gears for wear. Ensure metal driveshafts and hex hubs are secure.
• කම්පන: Check oil-filled shocks for leaks and proper damping. Refill or replace shock oil as needed.
• ෙබයාරිං: The vehicle features a complete set of ball bearings. Periodically check them for smooth operation and clean/lubricate if necessary.
• බැටරි ගබඩා කිරීම: Store Li-Po batteries at a "storage charge" level (typically 3.8V per cell) if not used for extended periods.
• ලිහිසි තෙල්: Apply appropriate RC-specific lubricant to moving metal parts as needed, avoiding electronics.

8. දෝශ නිරාකරණය

If you encounter issues with your BlackZon Smyter MT Turbo, refer to the table below for common problems and solutions.

9. පිරිවිතර

10. වගකීම් සහ සහාය

For warranty information, technical support, or replacement parts, please contact BlackZon customer service or your authorized dealer. Keep your purchase receipt as proof of purchase.

While specific warranty details are not provided in this manual, most RC products come with a limited warranty covering manufacturing defects. Damage due to misuse, accidents, or unauthorized modifications is typically not covered.

මිලදී ගැනීම සලකා බලන්නasing extended protection plans if available, such as those offered by retailers, to cover accidental damage or extended periods of use.