INTEX Prism 8,592 Liters Structural Pool User Manual

හැඳින්වීම

This manual provides essential instructions for the safe assembly, operation, and maintenance of your INTEX Prism 8,592 Liters Structural Pool. Please read all instructions carefully before setup and use to ensure proper function and safety. Retain this manual for future reference.

Image: The INTEX Prism Structural Pool, showcasing its complete setup including the pool, filter pump, and safety ladder, with individuals enjoying the pool.

ආරක්ෂිත තොරතුරු

අවවාදයයි: මෙම උපදෙස් පිළිපැදීමට අපොහොසත් වීම බරපතල තුවාල හෝ මරණයට හේතු විය හැක.

• වැඩිහිටි අධීක්ෂණය අවශ්‍යයි: Always provide active adult supervision to children and individuals with disabilities in and around the pool.
• කිමිදීම නැත: This pool is not designed for diving. Shallow water can cause serious injury.
• පැහැදිලි කලාපය: Keep children away from the pool cover to avoid entanglement. Ensure the area around the pool is clear of obstacles.
• රසායනික භාවිතය: Handle pool chemicals according to manufacturer instructions. Improper use can cause skin and eye irritation.
• විදුලි ආරක්ෂාව: Connect the filter pump to a grounded 110v outlet protected by a Ground Fault Circuit Interrupter (GFCI). Do not use extension cords.
• ඉණිමඟ ආරක්ෂාව: Use the ladder only for entering and exiting the pool. Do not allow children to play on the ladder.

පැකේජයේ අන්තර්ගතය

එකලස් කිරීම ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න:

• 1 x INTEX Prism Structural Pool Liner (8,592 Liters capacity)
• 1 x INTEX Filter Pump (2,006 Liters/hour, 110v)
• 1 x INTEX Safety Ladder
• Complete Metal Frame Components (legs, horizontal beams, pins)
• හෝස් සහ Clamps for Filter Pump Connection
• Ground Cloth (may be included or recommended separately)

සැකසුම් උපදෙස්

1. අඩවි තේරීම: Choose a firm, level surface for pool installation. The area must be free of sharp objects, debris, and have adequate drainage. Ensure the ground can support the weight of the filled pool.
2. Ground Cloth Placement: Lay the ground cloth (if included) on the selected site. This protects the pool liner from punctures.
3. රාමු එකලස් කිරීම: Following the diagrams provided in the separate assembly guide, connect all metal frame components. Ensure all T-joints, horizontal beams, and vertical legs are securely interlocked with the spring-loaded pins.
4. ලයිනර් ස්ථාපනය: Carefully spread the pool liner within the assembled frame. Position the drain plug away from the main traffic area. Smooth out any major wrinkles in the bottom of the liner.
5. පොම්ප සම්බන්ධතාවය: සපයා ඇති හෝස් සහ cl භාවිතයෙන් තටාක ලයිනර් එකේ නම් කරන ලද ඇතුල්වීමේ සහ පිටවීමේ තොටුපළවලට පෙරහන් පොම්පය සම්බන්ධ කරන්න.amps. කාන්දුවීම් වැළැක්වීම සඳහා සියලුම සම්බන්ධතා තදින් ඇති බවට වග බලා ගන්න.
6. ඉණිමඟ එකලස් කිරීම: Assemble the safety ladder according to its specific instructions. Place the ladder securely against the pool.
7. තටාකය පිරවීම: Begin filling the pool with water. As the water level rises, continue to smooth out any remaining wrinkles in the liner from the center outwards. Stop filling when the water reaches the recommended level, typically just below the top frame rail.

Image: The INTEX Prism Structural Pool fully assembled and filled with water in a garden setting, with individuals enjoying the pool.

Image: The INTEX Prism Structural Pool fully assembled and filled with water, situated in a garden environment.

මෙහෙයුම් උපදෙස්

1. ආරම්භක පොම්ප ක්‍රියාකාරිත්වය: Ensure the filter pump is properly connected to the pool and a grounded 110v GFCI outlet. Open all valves to allow water flow. Turn on the pump. It may take a few moments for water to circulate and air to purge from the system.
2. දෛනික මෙහෙයුම: Run the filter pump for 2-4 hours daily to maintain water circulation and filtration. The exact duration may vary based on pool usage, water clarity, and environmental conditions.

නඩත්තු කිරීම

• ජල රසායන විද්යාව: Regularly test your pool water's pH and chlorine levels using a pool test kit. Maintain pH between 7.2 and 7.6, and chlorine levels between 1-3 ppm. Adjust as needed with appropriate pool chemicals.
• පිරිසිදු කිරීම: Skim debris (leaves, insects) from the water surface daily. Vacuum the pool floor as necessary to remove settled dirt and particles.
• පෙරහන් කාට්රිජ්: Turn off and unplug the filter pump before cleaning or replacing the filter cartridge. Clean or replace the filter cartridge every 2 weeks, or more frequently with heavy pool use or if water appears cloudy.
• ශීත ඍතුකරණය: For regions with freezing temperatures, consult local guidelines for proper pool winterization procedures to prevent damage to the pool and equipment.

දෝෂගවේෂණය

පිරිවිතර

වගකීම් සහ සහාය

For detailed warranty information, product registration, or customer support, please refer to the documentation included with your INTEX Prism Structural Pool. It is recommended to keep your original purchase receipt as proof of purchase for any warranty claims. You may also visit the official INTEX webවැඩිදුර සහාය සහ සම්බන්ධතා තොරතුරු සඳහා අඩවිය.